From: Jonathan Cameron <jic23@kernel.org>
To: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Cc: linux-iio@vger.kernel.org
Subject: Re: [PATCH 1/2] iio: imu: inv_mpu6050: fix temperature reporting using bad unit
Date: Sat, 23 Nov 2019 16:18:40 +0000 [thread overview]
Message-ID: <20191123161840.4dace64c@archlinux> (raw)
In-Reply-To: <20191118103406.9353-1-jmaneyrol@invensense.com>
On Mon, 18 Nov 2019 11:34:05 +0100
Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> wrote:
> Temperature should be reported in milli-degrees, not degrees. Fix
> scale values to use the correct unit.
> Fix round-up offset value for MPU6050 and add the values for
> MPU6500 family (different from MPU6050).
>
> Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Hi.
This is combining several different things, but I can see that it
isn't easy to separate them out so I'll take it as is.
However, we need some information on how to backport this?
I'm guessing it won't be clean to do as the different parts
were added over time. Perhaps a fixes tag for now to the latest
change that affects this code, then look at backporting relevant
parts by hand.
Thanks,
Jonathan
> ---
> drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 23 +++++++++++-----------
> drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h | 16 +++++++++++----
> 2 files changed, 24 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
> index 23c0557891a0..268240644adf 100644
> --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
> +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
> @@ -117,6 +117,7 @@ static const struct inv_mpu6050_hw hw_info[] = {
> .reg = ®_set_6050,
> .config = &chip_config_6050,
> .fifo_size = 1024,
> + .temp = {INV_MPU6050_TEMP_OFFSET, INV_MPU6050_TEMP_SCALE},
> },
> {
> .whoami = INV_MPU6500_WHOAMI_VALUE,
> @@ -124,6 +125,7 @@ static const struct inv_mpu6050_hw hw_info[] = {
> .reg = ®_set_6500,
> .config = &chip_config_6050,
> .fifo_size = 512,
> + .temp = {INV_MPU6500_TEMP_OFFSET, INV_MPU6500_TEMP_SCALE},
> },
> {
> .whoami = INV_MPU6515_WHOAMI_VALUE,
> @@ -131,6 +133,7 @@ static const struct inv_mpu6050_hw hw_info[] = {
> .reg = ®_set_6500,
> .config = &chip_config_6050,
> .fifo_size = 512,
> + .temp = {INV_MPU6500_TEMP_OFFSET, INV_MPU6500_TEMP_SCALE},
> },
> {
> .whoami = INV_MPU6000_WHOAMI_VALUE,
> @@ -138,6 +141,7 @@ static const struct inv_mpu6050_hw hw_info[] = {
> .reg = ®_set_6050,
> .config = &chip_config_6050,
> .fifo_size = 1024,
> + .temp = {INV_MPU6050_TEMP_OFFSET, INV_MPU6050_TEMP_SCALE},
> },
> {
> .whoami = INV_MPU9150_WHOAMI_VALUE,
> @@ -145,6 +149,7 @@ static const struct inv_mpu6050_hw hw_info[] = {
> .reg = ®_set_6050,
> .config = &chip_config_6050,
> .fifo_size = 1024,
> + .temp = {INV_MPU6050_TEMP_OFFSET, INV_MPU6050_TEMP_SCALE},
> },
> {
> .whoami = INV_MPU9250_WHOAMI_VALUE,
> @@ -152,6 +157,7 @@ static const struct inv_mpu6050_hw hw_info[] = {
> .reg = ®_set_6500,
> .config = &chip_config_6050,
> .fifo_size = 512,
> + .temp = {INV_MPU6500_TEMP_OFFSET, INV_MPU6500_TEMP_SCALE},
> },
> {
> .whoami = INV_MPU9255_WHOAMI_VALUE,
> @@ -159,6 +165,7 @@ static const struct inv_mpu6050_hw hw_info[] = {
> .reg = ®_set_6500,
> .config = &chip_config_6050,
> .fifo_size = 512,
> + .temp = {INV_MPU6500_TEMP_OFFSET, INV_MPU6500_TEMP_SCALE},
> },
> {
> .whoami = INV_ICM20608_WHOAMI_VALUE,
> @@ -166,6 +173,7 @@ static const struct inv_mpu6050_hw hw_info[] = {
> .reg = ®_set_6500,
> .config = &chip_config_6050,
> .fifo_size = 512,
> + .temp = {INV_ICM20608_TEMP_OFFSET, INV_ICM20608_TEMP_SCALE},
> },
> {
> .whoami = INV_ICM20602_WHOAMI_VALUE,
> @@ -173,6 +181,7 @@ static const struct inv_mpu6050_hw hw_info[] = {
> .reg = ®_set_icm20602,
> .config = &chip_config_6050,
> .fifo_size = 1008,
> + .temp = {INV_ICM20608_TEMP_OFFSET, INV_ICM20608_TEMP_SCALE},
> },
> };
>
> @@ -481,12 +490,8 @@ inv_mpu6050_read_raw(struct iio_dev *indio_dev,
>
> return IIO_VAL_INT_PLUS_MICRO;
> case IIO_TEMP:
> - *val = 0;
> - if (st->chip_type == INV_ICM20602)
> - *val2 = INV_ICM20602_TEMP_SCALE;
> - else
> - *val2 = INV_MPU6050_TEMP_SCALE;
> -
> + *val = st->hw->temp.scale / 1000000;
> + *val2 = st->hw->temp.scale % 1000000;
> return IIO_VAL_INT_PLUS_MICRO;
> case IIO_MAGN:
> return inv_mpu_magn_get_scale(st, chan, val, val2);
> @@ -496,11 +501,7 @@ inv_mpu6050_read_raw(struct iio_dev *indio_dev,
> case IIO_CHAN_INFO_OFFSET:
> switch (chan->type) {
> case IIO_TEMP:
> - if (st->chip_type == INV_ICM20602)
> - *val = INV_ICM20602_TEMP_OFFSET;
> - else
> - *val = INV_MPU6050_TEMP_OFFSET;
> -
> + *val = st->hw->temp.offset;
> return IIO_VAL_INT;
> default:
> return -EINVAL;
> diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
> index f1fb7b6bdab1..b096e010d4ee 100644
> --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
> +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
> @@ -107,6 +107,7 @@ struct inv_mpu6050_chip_config {
> * @reg: register map of the chip.
> * @config: configuration of the chip.
> * @fifo_size: size of the FIFO in bytes.
> + * @temp: offset and scale to apply to raw temperature.
> */
> struct inv_mpu6050_hw {
> u8 whoami;
> @@ -114,6 +115,10 @@ struct inv_mpu6050_hw {
> const struct inv_mpu6050_reg_map *reg;
> const struct inv_mpu6050_chip_config *config;
> size_t fifo_size;
> + struct {
> + int offset;
> + int scale;
> + } temp;
> };
>
> /*
> @@ -279,16 +284,19 @@ struct inv_mpu6050_state {
> #define INV_MPU6050_REG_UP_TIME_MIN 5000
> #define INV_MPU6050_REG_UP_TIME_MAX 10000
>
> -#define INV_MPU6050_TEMP_OFFSET 12421
> -#define INV_MPU6050_TEMP_SCALE 2941
> +#define INV_MPU6050_TEMP_OFFSET 12420
> +#define INV_MPU6050_TEMP_SCALE 2941176
> #define INV_MPU6050_MAX_GYRO_FS_PARAM 3
> #define INV_MPU6050_MAX_ACCL_FS_PARAM 3
> #define INV_MPU6050_THREE_AXIS 3
> #define INV_MPU6050_GYRO_CONFIG_FSR_SHIFT 3
> #define INV_MPU6050_ACCL_CONFIG_FSR_SHIFT 3
>
> -#define INV_ICM20602_TEMP_OFFSET 8170
> -#define INV_ICM20602_TEMP_SCALE 3060
> +#define INV_MPU6500_TEMP_OFFSET 7011
> +#define INV_MPU6500_TEMP_SCALE 2995178
> +
> +#define INV_ICM20608_TEMP_OFFSET 8170
> +#define INV_ICM20608_TEMP_SCALE 3059976
>
> /* 6 + 6 + 7 (for MPU9x50) = 19 round up to 24 and plus 8 */
> #define INV_MPU6050_OUTPUT_DATA_SIZE 32
prev parent reply other threads:[~2019-11-23 16:18 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-18 10:34 [PATCH 1/2] iio: imu: inv_mpu6050: fix temperature reporting using bad unit Jean-Baptiste Maneyrol
2019-11-18 10:34 ` [PATCH 2/2] iio: imu: inv_mpu6050: add fifo temperature data support Jean-Baptiste Maneyrol
2019-11-23 16:22 ` Jonathan Cameron
[not found] ` <MN2PR12MB33739BF5EA2C9E402EDF4684C4430@MN2PR12MB3373.namprd12.prod.outlook.com>
2019-12-24 9:17 ` Jean-Baptiste Maneyrol
2019-12-30 16:26 ` Jonathan Cameron
2020-01-14 9:22 ` Jean-Baptiste Maneyrol
2020-01-18 11:10 ` Jonathan Cameron
2019-11-23 16:18 ` Jonathan Cameron [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191123161840.4dace64c@archlinux \
--to=jic23@kernel.org \
--cc=jmaneyrol@invensense.com \
--cc=linux-iio@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).