* [PATCH] iio: dac: Kconfig: sort symbols alphabetically
@ 2020-03-04 13:55 Alexandru Ardelean
2020-03-07 15:55 ` Jonathan Cameron
0 siblings, 1 reply; 2+ messages in thread
From: Alexandru Ardelean @ 2020-03-04 13:55 UTC (permalink / raw)
To: linux-iio, linux-kernel; +Cc: jic23, Alexandru Ardelean
While adding a new device, I noticed these aren't sorted alphabetically [as
in the Makefile], which messed my head-up.
This change sorts the devices alphabetically in the drivers/iio/dac/Kconfig
file as well.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
---
drivers/iio/dac/Kconfig | 62 ++++++++++++++++++++---------------------
1 file changed, 31 insertions(+), 31 deletions(-)
diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig
index 63916a6142ec..93744011b63f 100644
--- a/drivers/iio/dac/Kconfig
+++ b/drivers/iio/dac/Kconfig
@@ -121,27 +121,6 @@ config AD5624R_SPI
Say yes here to build support for Analog Devices AD5624R, AD5644R and
AD5664R converters (DAC). This driver uses the common SPI interface.
-config LTC1660
- tristate "Linear Technology LTC1660/LTC1665 DAC SPI driver"
- depends on SPI
- help
- Say yes here to build support for Linear Technology
- LTC1660 and LTC1665 Digital to Analog Converters.
-
- To compile this driver as a module, choose M here: the
- module will be called ltc1660.
-
-config LTC2632
- tristate "Linear Technology LTC2632-12/10/8 and LTC2636-12/10/8 DAC spi driver"
- depends on SPI
- help
- Say yes here to build support for Linear Technology
- LTC2632-12, LTC2632-10, LTC2632-8, LTC2636-12, LTC2636-10 and
- LTC2636-8 converters (DAC).
-
- To compile this driver as a module, choose M here: the
- module will be called ltc2632.
-
config AD5686
tristate
@@ -240,16 +219,6 @@ config AD7303
To compile this driver as module choose M here: the module will be called
ad7303.
-config CIO_DAC
- tristate "Measurement Computing CIO-DAC IIO driver"
- depends on X86 && (ISA_BUS || PC104)
- select ISA_BUS_API
- help
- Say yes here to build support for the Measurement Computing CIO-DAC
- analog output device family (CIO-DAC16, CIO-DAC08, PC104-DAC06). The
- base port addresses for the devices may be configured via the base
- array module parameter.
-
config AD8801
tristate "Analog Devices AD8801/AD8803 DAC driver"
depends on SPI_MASTER
@@ -260,6 +229,16 @@ config AD8801
To compile this driver as a module choose M here: the module will be called
ad8801.
+config CIO_DAC
+ tristate "Measurement Computing CIO-DAC IIO driver"
+ depends on X86 && (ISA_BUS || PC104)
+ select ISA_BUS_API
+ help
+ Say yes here to build support for the Measurement Computing CIO-DAC
+ analog output device family (CIO-DAC16, CIO-DAC08, PC104-DAC06). The
+ base port addresses for the devices may be configured via the base
+ array module parameter.
+
config DPOT_DAC
tristate "DAC emulation using a DPOT"
depends on OF
@@ -289,6 +268,27 @@ config LPC18XX_DAC
To compile this driver as a module, choose M here: the module will be
called lpc18xx_dac.
+config LTC1660
+ tristate "Linear Technology LTC1660/LTC1665 DAC SPI driver"
+ depends on SPI
+ help
+ Say yes here to build support for Linear Technology
+ LTC1660 and LTC1665 Digital to Analog Converters.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ltc1660.
+
+config LTC2632
+ tristate "Linear Technology LTC2632-12/10/8 and LTC2636-12/10/8 DAC spi driver"
+ depends on SPI
+ help
+ Say yes here to build support for Linear Technology
+ LTC2632-12, LTC2632-10, LTC2632-8, LTC2636-12, LTC2636-10 and
+ LTC2636-8 converters (DAC).
+
+ To compile this driver as a module, choose M here: the
+ module will be called ltc2632.
+
config M62332
tristate "Mitsubishi M62332 DAC driver"
depends on I2C
--
2.20.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] iio: dac: Kconfig: sort symbols alphabetically
2020-03-04 13:55 [PATCH] iio: dac: Kconfig: sort symbols alphabetically Alexandru Ardelean
@ 2020-03-07 15:55 ` Jonathan Cameron
0 siblings, 0 replies; 2+ messages in thread
From: Jonathan Cameron @ 2020-03-07 15:55 UTC (permalink / raw)
To: Alexandru Ardelean; +Cc: linux-iio, linux-kernel
On Wed, 4 Mar 2020 15:55:44 +0200
Alexandru Ardelean <alexandru.ardelean@analog.com> wrote:
> While adding a new device, I noticed these aren't sorted alphabetically [as
> in the Makefile], which messed my head-up.
> This change sorts the devices alphabetically in the drivers/iio/dac/Kconfig
> file as well.
>
> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
oops. That clearly snuck past when I wasn't paying attention.
Good to clean it up.
Applied to the togreg branch of iio.git and pushed out as testing for
the autobuilders to hopefully not notice!
Thanks,
Jonathan
> ---
> drivers/iio/dac/Kconfig | 62 ++++++++++++++++++++---------------------
> 1 file changed, 31 insertions(+), 31 deletions(-)
>
> diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig
> index 63916a6142ec..93744011b63f 100644
> --- a/drivers/iio/dac/Kconfig
> +++ b/drivers/iio/dac/Kconfig
> @@ -121,27 +121,6 @@ config AD5624R_SPI
> Say yes here to build support for Analog Devices AD5624R, AD5644R and
> AD5664R converters (DAC). This driver uses the common SPI interface.
>
> -config LTC1660
> - tristate "Linear Technology LTC1660/LTC1665 DAC SPI driver"
> - depends on SPI
> - help
> - Say yes here to build support for Linear Technology
> - LTC1660 and LTC1665 Digital to Analog Converters.
> -
> - To compile this driver as a module, choose M here: the
> - module will be called ltc1660.
> -
> -config LTC2632
> - tristate "Linear Technology LTC2632-12/10/8 and LTC2636-12/10/8 DAC spi driver"
> - depends on SPI
> - help
> - Say yes here to build support for Linear Technology
> - LTC2632-12, LTC2632-10, LTC2632-8, LTC2636-12, LTC2636-10 and
> - LTC2636-8 converters (DAC).
> -
> - To compile this driver as a module, choose M here: the
> - module will be called ltc2632.
> -
> config AD5686
> tristate
>
> @@ -240,16 +219,6 @@ config AD7303
> To compile this driver as module choose M here: the module will be called
> ad7303.
>
> -config CIO_DAC
> - tristate "Measurement Computing CIO-DAC IIO driver"
> - depends on X86 && (ISA_BUS || PC104)
> - select ISA_BUS_API
> - help
> - Say yes here to build support for the Measurement Computing CIO-DAC
> - analog output device family (CIO-DAC16, CIO-DAC08, PC104-DAC06). The
> - base port addresses for the devices may be configured via the base
> - array module parameter.
> -
> config AD8801
> tristate "Analog Devices AD8801/AD8803 DAC driver"
> depends on SPI_MASTER
> @@ -260,6 +229,16 @@ config AD8801
> To compile this driver as a module choose M here: the module will be called
> ad8801.
>
> +config CIO_DAC
> + tristate "Measurement Computing CIO-DAC IIO driver"
> + depends on X86 && (ISA_BUS || PC104)
> + select ISA_BUS_API
> + help
> + Say yes here to build support for the Measurement Computing CIO-DAC
> + analog output device family (CIO-DAC16, CIO-DAC08, PC104-DAC06). The
> + base port addresses for the devices may be configured via the base
> + array module parameter.
> +
> config DPOT_DAC
> tristate "DAC emulation using a DPOT"
> depends on OF
> @@ -289,6 +268,27 @@ config LPC18XX_DAC
> To compile this driver as a module, choose M here: the module will be
> called lpc18xx_dac.
>
> +config LTC1660
> + tristate "Linear Technology LTC1660/LTC1665 DAC SPI driver"
> + depends on SPI
> + help
> + Say yes here to build support for Linear Technology
> + LTC1660 and LTC1665 Digital to Analog Converters.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called ltc1660.
> +
> +config LTC2632
> + tristate "Linear Technology LTC2632-12/10/8 and LTC2636-12/10/8 DAC spi driver"
> + depends on SPI
> + help
> + Say yes here to build support for Linear Technology
> + LTC2632-12, LTC2632-10, LTC2632-8, LTC2636-12, LTC2636-10 and
> + LTC2636-8 converters (DAC).
> +
> + To compile this driver as a module, choose M here: the
> + module will be called ltc2632.
> +
> config M62332
> tristate "Mitsubishi M62332 DAC driver"
> depends on I2C
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2020-03-07 15:56 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2020-03-04 13:55 [PATCH] iio: dac: Kconfig: sort symbols alphabetically Alexandru Ardelean
2020-03-07 15:55 ` Jonathan Cameron
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).