From: Jonathan Cameron <jic23@kernel.org>
To: Beniamin Bia <beniamin.bia@analog.com>
Cc: <linux-iio@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<knaack.h@gmx.de>, <pmeerw@pmeerw.net>,
<Michael.Hennerich@analog.com>, <biabeniamin@outlook.com>,
Dragos Bogdan <dragos.bogdan@analog.com>
Subject: Re: [PATCH 1/4] iio: adc: ad7476: Generate CONVST signal internally
Date: Sun, 15 Mar 2020 13:15:28 +0000 [thread overview]
Message-ID: <20200315131528.11d1b8bd@archlinux> (raw)
In-Reply-To: <20200311084328.17680-1-beniamin.bia@analog.com>
On Wed, 11 Mar 2020 10:43:25 +0200
Beniamin Bia <beniamin.bia@analog.com> wrote:
> From: Dragos Bogdan <dragos.bogdan@analog.com>
>
> Compared to the other supported parts, AD7091R are dependent of
> a CONVST signal that initiates the conversion. At this moment, only
> sampling in buffered mode is supported for AD7091R and the only
> option until now was to generate this signal externally using an
> IIO trigger. This patch adds the option of generating it internally,
> more compatible triggers being available in this case.
>
> Also, it is an intermiate step of adding support more devices.
>
> Signed-off-by: Dragos Bogdan <dragos.bogdan@analog.com>
> Signed-off-by: Beniamin Bia <beniamin.bia@analog.com>
Seems sensible. Applied to the togreg branch of iio.git and pushed
out as testing for the autobuilders to play with it.
Thanks,
Jonathan
> ---
> drivers/iio/adc/ad7476.c | 22 ++++++++++++++++++++++
> 1 file changed, 22 insertions(+)
>
> diff --git a/drivers/iio/adc/ad7476.c b/drivers/iio/adc/ad7476.c
> index 76747488044b..32e857dfec9c 100644
> --- a/drivers/iio/adc/ad7476.c
> +++ b/drivers/iio/adc/ad7476.c
> @@ -12,9 +12,11 @@
> #include <linux/sysfs.h>
> #include <linux/spi/spi.h>
> #include <linux/regulator/consumer.h>
> +#include <linux/gpio/consumer.h>
> #include <linux/err.h>
> #include <linux/module.h>
> #include <linux/bitops.h>
> +#include <linux/delay.h>
>
> #include <linux/iio/iio.h>
> #include <linux/iio/sysfs.h>
> @@ -34,6 +36,7 @@ struct ad7476_state {
> struct spi_device *spi;
> const struct ad7476_chip_info *chip_info;
> struct regulator *reg;
> + struct gpio_desc *convst_gpio;
> struct spi_transfer xfer;
> struct spi_message msg;
> /*
> @@ -64,6 +67,17 @@ enum ad7476_supported_device_ids {
> ID_ADS7868,
> };
>
> +static void ad7091_convst(struct ad7476_state *st)
> +{
> + if (!st->convst_gpio)
> + return;
> +
> + gpiod_set_value(st->convst_gpio, 0);
> + udelay(1); /* CONVST pulse width: 10 ns min */
> + gpiod_set_value(st->convst_gpio, 1);
> + udelay(1); /* Conversion time: 650 ns max */
> +}
> +
> static irqreturn_t ad7476_trigger_handler(int irq, void *p)
> {
> struct iio_poll_func *pf = p;
> @@ -71,6 +85,8 @@ static irqreturn_t ad7476_trigger_handler(int irq, void *p)
> struct ad7476_state *st = iio_priv(indio_dev);
> int b_sent;
>
> + ad7091_convst(st);
> +
> b_sent = spi_sync(st->spi, &st->msg);
> if (b_sent < 0)
> goto done;
> @@ -254,6 +270,12 @@ static int ad7476_probe(struct spi_device *spi)
> if (ret)
> return ret;
>
> + st->convst_gpio = devm_gpiod_get_optional(&spi->dev,
> + "adi,conversion-start",
> + GPIOD_OUT_LOW);
> + if (IS_ERR(st->convst_gpio))
> + return PTR_ERR(st->convst_gpio);
> +
> spi_set_drvdata(spi, indio_dev);
>
> st->spi = spi;
prev parent reply other threads:[~2020-03-15 13:15 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-11 8:43 [PATCH 1/4] iio: adc: ad7476: Generate CONVST signal internally Beniamin Bia
2020-03-11 8:43 ` [PATCH 2/4] iio: adc: ad7476: Add IIO_CHAN_INFO_RAW for AD7091R Beniamin Bia
2020-03-15 13:16 ` Jonathan Cameron
2020-03-11 8:43 ` [PATCH 3/4] iio: adc: ad7476: Add AD7091 support Beniamin Bia
2020-03-15 13:17 ` Jonathan Cameron
2020-03-11 8:43 ` [PATCH 4/4] iio: adc: ad7476: implement devm_add_action_or_reset Beniamin Bia
2020-03-15 13:18 ` Jonathan Cameron
2020-03-15 13:15 ` Jonathan Cameron [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200315131528.11d1b8bd@archlinux \
--to=jic23@kernel.org \
--cc=Michael.Hennerich@analog.com \
--cc=beniamin.bia@analog.com \
--cc=biabeniamin@outlook.com \
--cc=dragos.bogdan@analog.com \
--cc=knaack.h@gmx.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pmeerw@pmeerw.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).