Re: Use LIS3MDL with LSM6DSM sensor-hub

[Lorenzo Bianconi <lorenzo@kernel.org>]

[-- Attachment #1: Type: text/plain, Size: 6421 bytes --]

> On 2020-03-19 18:40, Lorenzo Bianconi wrote:
> > > On 2020-03-14 13:43, Lorenzo Bianconi wrote:
> > > > On Mar 11, Jimmy Assarsson wrote:
> > > > > Hi,
> > > > > 

[...]

> > > > Hi Jimmy,
> > > > 
> > > > in order to set the full scale on LIS3MDL you can try the following patch (just
> > > > compiled, not tested)
> > > > 
> > > > Regards,
> > > > Lorenzo
> > > 
> > > Hi Lorenzo,
> > > 
> > > Sorry for the late response and thanks for the patch!
> > 
> > Hi Jimmy,
> > 
> > ok, I will post the patch, thx for testing.
> 
> Great, you can add
> Tested-by: Jimmy Assarsson <jimmyassarsson@gmail.com>
> 
> > > The patches seems to work.
> > > Are there any specific tests that we should carry out?
> > > Via the sysfs interface, we've tested reading raw values of each channel and
> > > configuring ODR and full scale.
> > 
> > you can try to enable batching in the hw FIFO doing something like:
> > 
> > $echo 1 > /sys/bus/iio/devices/<iio-magn>/scan_elements/in_magn_x_en
> > $echo 1 > /sys/bus/iio/devices/<iio-magn>/scan_elements/in_magn_y_en
> > $echo 1 > /sys/bus/iio/devices/<iio-magn>/scan_elements/in_magn_z_en
> > $echo 1 > /sys/bus/iio/devices/<iio-magn>/scan_elements/in_timestamp_en
> > 
> > $watermark=64
> > $echo $((2*watermark)) > /sys/bus/iio/devices/<iio-magn>/buffer/length
> > $echo $watermark > /sys/bus/iio/devices/<iio-magn>/buffer/watermark
> > 
> > $generic_buffer -gn lsm6dsm_magn -c <# of samples>
> 
> Ok. I don't got any scan_elements nor buffer directory, for any of the devices.
> I guess it is not possible to use the FIFO without configuring any interrupt?
> We got the following dts:
> &spi1 {
> 	#address-cells = <1>;
> 	#size-cells = <0>;
> 	lsm6dsm@0 {
> 		compatible = "st,lsm6dsm";
> 		reg = <0x0>;
> 
> 		spi-max-frequency = <500000>;
> 		st,pullups = "true";

yes, you need to provide the interrupt line doing something like (this is from
the dts on my rpi):

	lsm6dsm@0 {
		...
		interrupt-parent = <&gpio>;
		interrupts = <21 0x4>;
		...
	};

> 	};
> };
> 
> I'll look into this tomorrow or in the beginning of next week, thanks for the help.
> 
> Regards,
> jimmy
> 
> > 
> > Regards,
> > Lorenzo
> > 
> > > 
> > > Regards,
> > > jimmy
> > > 
> > > > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c
> > > > index 64ef07a30726..fec1dbd5f00d 100644
> > > > --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c
> > > > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c
> > > > @@ -518,6 +518,36 @@ st_lsm6dsx_shub_read_raw(struct iio_dev *iio_dev,
> > > >    	return ret;
> > > >    }
> > > > +static int
> > > > +st_lsm6dsx_shub_set_full_scale(struct st_lsm6dsx_sensor *sensor,
> > > > +			       u32 gain)
> > > > +{
> > > > +	const struct st_lsm6dsx_fs_table_entry *fs_table;
> > > > +	int i, err;
> > > > +
> > > > +	fs_table = &sensor->ext_info.settings->fs_table;
> > > > +	if (!fs_table->reg.addr)
> > > > +		return -ENOTSUPP;
> > > > +
> > > > +	for (i = 0; i < fs_table->fs_len; i++) {
> > > > +		if (fs_table->fs_avl[i].gain == gain)
> > > > +			break;
> > > > +	}
> > > > +
> > > > +	if (i == fs_table->fs_len)
> > > > +		return -EINVAL;
> > > > +
> > > > +	err = st_lsm6dsx_shub_write_with_mask(sensor, fs_table->reg.addr,
> > > > +					      fs_table->reg.mask,
> > > > +					      fs_table->fs_avl[i].val);
> > > > +	if (err < 0)
> > > > +		return err;
> > > > +
> > > > +	sensor->gain = gain;
> > > > +
> > > > +	return 0;
> > > > +}
> > > > +
> > > >    static int
> > > >    st_lsm6dsx_shub_write_raw(struct iio_dev *iio_dev,
> > > >    			  struct iio_chan_spec const *chan,
> > > > @@ -552,6 +582,9 @@ st_lsm6dsx_shub_write_raw(struct iio_dev *iio_dev,
> > > >    		}
> > > >    		break;
> > > >    	}
> > > > +	case IIO_CHAN_INFO_SCALE:
> > > > +		err = st_lsm6dsx_shub_set_full_scale(sensor, val2);
> > > > +		break;
> > > >    	default:
> > > >    		err = -EINVAL;
> > > >    		break;
> > > > 
> > > > > 
> > > > > ---
> > > > > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c
> > > > > index eea5556..8621dba 100644
> > > > > --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c
> > > > > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c
> > > > > @@ -88,6 +88,69 @@ static const struct st_lsm6dsx_ext_dev_settings st_lsm6dsx_ext_dev_table[] = {
> > > > >    			.len = 6,
> > > > >    		},
> > > > >    	},
> > > > > +	/* LIS3MDL */
> > > > > +	{
> > > > > +		.i2c_addr = { 0x1e },
> > > > > +		.wai = {
> > > > > +			.addr = 0x0f,
> > > > > +			.val = 0x3d,
> > > > > +		},
> > > > > +		.id = ST_LSM6DSX_ID_MAGN,
> > > > > +		.odr_table = {
> > > > > +			.reg = {
> > > > > +				.addr = 0x20,
> > > > > +				.mask = GENMASK(4, 2),
> > > > > +			},
> > > > > +			.odr_avl[0] = {  1000, 0x0 },
> > > > > +			.odr_avl[1] = {  2000, 0x1 },
> > > > > +			.odr_avl[2] = {  3000, 0x2 },
> > > > > +			.odr_avl[3] = {  5000, 0x3 },
> > > > > +			.odr_avl[4] = { 10000, 0x4 },
> > > > > +			.odr_avl[5] = { 20000, 0x5 },
> > > > > +			.odr_avl[6] = { 40000, 0x6 },
> > > > > +			.odr_avl[7] = { 80000, 0x7 },
> > > > > +			.odr_len = 8,
> > > > > +		},
> > > > > +		.fs_table = {
> > > > > +			.reg = {
> > > > > +				.addr = 0x21,
> > > > > +				.mask = GENMASK(6, 5),
> > > > > +			},
> > > > > +			.fs_avl[0] = {
> > > > > +				.gain = 146,
> > > > > +				.val = 0x00,
> > > > > +			}, /* 4000 uG/LSB */
> > > > > +			.fs_avl[1] = {
> > > > > +				.gain = 292,
> > > > > +				.val = 0x01,
> > > > > +			}, /* 8000 uG/LSB */
> > > > > +			.fs_avl[2] = {
> > > > > +				.gain = 438,
> > > > > +				.val = 0x02,
> > > > > +			}, /* 12000 uG/LSB */
> > > > > +			.fs_avl[3] = {
> > > > > +				.gain = 584,
> > > > > +				.val = 0x03,
> > > > > +			}, /* 16000 uG/LSB */
> > > > > +			.fs_len = 4,
> > > > > +		},
> > > > > +		.pwr_table = {
> > > > > +			.reg = {
> > > > > +				.addr = 0x22,
> > > > > +				.mask = GENMASK(1, 0),
> > > > > +			},
> > > > > +			.off_val = 0x2,
> > > > > +			.on_val = 0x0,
> > > > > +		},
> > > > > +		.bdu = {
> > > > > +			.addr = 0x24,
> > > > > +			.mask = BIT(6),
> > > > > +		},
> > > > > +		.out = {
> > > > > +			.addr = 0x28,
> > > > > +			.len = 6,
> > > > > +		},
> > > > > +	},
> > > > >    };

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]