Re: [PATCH v2 1/2] dt-bindings: iio: bmc150_magn: Document and fix missing compatibles

Jonathan Cameron
2020-06-27T13:44:08Z

On Mon, 22 Jun 2020 08:01:09 +0200
Krzysztof Kozlowski <krzk@kernel.org> wrote:

> The driver supports also BMC156B and BMM150B but these compatibles had
> redundant suffix "_magn". Add existing compatibles marking them
> deprecated along with adding a new, proper one for this family of
> devices.
Thanks for tidying this up.

The BMC156B is a dual magnetometer and accelerometer chip
so for that one the _magn postfix probably is needed.

Or am I missing something?

The way this does SPI is rather odd but seems to be the same as the bmc150
(two chips with non overlapping register maps).

Jonathan

>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
>
> ---
>
> Changes since v1:
> 1. Mark old compatibles as deprecated, add new one.
> ---
> .../devicetree/bindings/iio/magnetometer/bmc150_magn.txt | 6 +++++-
> 1 file changed, 5 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/iio/magnetometer/bmc150_magn.txt b/Documentation/devicetree/bindings/iio/magnetometer/bmc150_magn.txt
> index fd5fca90fb39..efeda055be6a 100644
> --- a/Documentation/devicetree/bindings/iio/magnetometer/bmc150_magn.txt
> +++ b/Documentation/devicetree/bindings/iio/magnetometer/bmc150_magn.txt
> @@ -4,7 +4,11 @@ http://ae-bst.resource.bosch.com/media/products/dokumente/bmc150/BST-BMC150-DS00
>
> Required properties:
>
> - - compatible : should be "bosch,bmc150_magn"
> + - compatible : should be one of:
> + "bosch,bmc150_magn"
> + "bosch,bmc156"
> + "bosch,bmc156_magn" (DEPRECATED, use bosch,bmc156)
> + "bosch,bmm150_magn" (DEPRECATED, use bosch,bmc156)
> - reg : the I2C address of the magnetometer
>