From: Jonathan Cameron <jic23@kernel.org>
To: Sean Nyekjaer <sean@geanix.com>
Cc: Lorenzo Bianconi <lorenzo@kernel.org>,
linux-iio@vger.kernel.org, lorenzo.bianconi@redhat.com
Subject: Re: [PATCH] iio: imu: st_lsm6dsx: reset hw ts after resume
Date: Sun, 12 Jul 2020 12:10:00 +0100 [thread overview]
Message-ID: <20200712121000.46a93069@archlinux> (raw)
In-Reply-To: <f639082c-91b9-c056-673d-2835ba05ac03@geanix.com>
On Sat, 11 Jul 2020 13:49:37 +0200
Sean Nyekjaer <sean@geanix.com> wrote:
> On 10/07/2020 15.49, Lorenzo Bianconi wrote:
> > Reset hw time sampling after the device resume in order to keep timing
> > in sync
> >
> > Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
> Tested-by: Sean Nyekjaer <sean@geanix.com>
Hi Lorenzo,
Patch is fine, but I'd like a couple of changes to the description:
1. More detail! For what we have here no one will have any real idea
of whether an issue they are seeing is the same one or not.
2. Fixes tag / or something telling me why this shouldn't be back ported.
Thanks,
Jonathan
> > ---
> > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 3 +--
> > .../iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c | 23 ++++++++++++-------
> > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 2 +-
> > 3 files changed, 17 insertions(+), 11 deletions(-)
> >
> > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> > index b56df409ed0f..529970195b39 100644
> > --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> > @@ -436,8 +436,7 @@ int st_lsm6dsx_update_watermark(struct st_lsm6dsx_sensor *sensor,
> > u16 watermark);
> > int st_lsm6dsx_update_fifo(struct st_lsm6dsx_sensor *sensor, bool enable);
> > int st_lsm6dsx_flush_fifo(struct st_lsm6dsx_hw *hw);
> > -int st_lsm6dsx_set_fifo_mode(struct st_lsm6dsx_hw *hw,
> > - enum st_lsm6dsx_fifo_mode fifo_mode);
> > +int st_lsm6dsx_resume_fifo(struct st_lsm6dsx_hw *hw);
> > int st_lsm6dsx_read_fifo(struct st_lsm6dsx_hw *hw);
> > int st_lsm6dsx_read_tagged_fifo(struct st_lsm6dsx_hw *hw);
> > int st_lsm6dsx_check_odr(struct st_lsm6dsx_sensor *sensor, u32 odr, u8 *val);
> > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
> > index afd00daeefb2..7de10bd636ea 100644
> > --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
> > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
> > @@ -184,8 +184,8 @@ static int st_lsm6dsx_update_decimators(struct st_lsm6dsx_hw *hw)
> > return err;
> > }
> >
> > -int st_lsm6dsx_set_fifo_mode(struct st_lsm6dsx_hw *hw,
> > - enum st_lsm6dsx_fifo_mode fifo_mode)
> > +static int st_lsm6dsx_set_fifo_mode(struct st_lsm6dsx_hw *hw,
> > + enum st_lsm6dsx_fifo_mode fifo_mode)
> > {
> > unsigned int data;
> >
> > @@ -302,6 +302,18 @@ static int st_lsm6dsx_reset_hw_ts(struct st_lsm6dsx_hw *hw)
> > return 0;
> > }
> >
> > +int st_lsm6dsx_resume_fifo(struct st_lsm6dsx_hw *hw)
> > +{
> > + int err;
> > +
> > + /* reset hw ts counter */
> > + err = st_lsm6dsx_reset_hw_ts(hw);
> > + if (err < 0)
> > + return err;
> > +
> > + return st_lsm6dsx_set_fifo_mode(hw, ST_LSM6DSX_FIFO_CONT);
> > +}
> > +
> > /*
> > * Set max bulk read to ST_LSM6DSX_MAX_WORD_LEN/ST_LSM6DSX_MAX_TAGGED_WORD_LEN
> > * in order to avoid a kmalloc for each bus access
> > @@ -675,12 +687,7 @@ int st_lsm6dsx_update_fifo(struct st_lsm6dsx_sensor *sensor, bool enable)
> > goto out;
> >
> > if (fifo_mask) {
> > - /* reset hw ts counter */
> > - err = st_lsm6dsx_reset_hw_ts(hw);
> > - if (err < 0)
> > - goto out;
> > -
> > - err = st_lsm6dsx_set_fifo_mode(hw, ST_LSM6DSX_FIFO_CONT);
> > + err = st_lsm6dsx_resume_fifo(hw);
> > if (err < 0)
> > goto out;
> > }
> > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> > index c8ddeb3f48ff..346c24281d26 100644
> > --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> > @@ -2457,7 +2457,7 @@ static int __maybe_unused st_lsm6dsx_resume(struct device *dev)
> > }
> >
> > if (hw->fifo_mask)
> > - err = st_lsm6dsx_set_fifo_mode(hw, ST_LSM6DSX_FIFO_CONT);
> > + err = st_lsm6dsx_resume_fifo(hw);
> >
> > return err;
> > }
>
next prev parent reply other threads:[~2020-07-12 11:10 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-10 13:49 [PATCH] iio: imu: st_lsm6dsx: reset hw ts after resume Lorenzo Bianconi
2020-07-11 11:49 ` Sean Nyekjaer
2020-07-12 11:10 ` Jonathan Cameron [this message]
2020-07-12 14:33 ` Lorenzo Bianconi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200712121000.46a93069@archlinux \
--to=jic23@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=lorenzo.bianconi@redhat.com \
--cc=lorenzo@kernel.org \
--cc=sean@geanix.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox