* [PATCH v2 1/2] dt-bindings: iio: imu: mpu6050: Document invensense,mpu6880
@ 2020-12-02 10:46 Stephan Gerhold
2020-12-02 10:46 ` [PATCH v2 2/2] iio: imu: inv_mpu6050: Add support for MPU-6880 Stephan Gerhold
` (2 more replies)
0 siblings, 3 replies; 6+ messages in thread
From: Stephan Gerhold @ 2020-12-02 10:46 UTC (permalink / raw)
To: Jonathan Cameron
Cc: Lars-Peter Clausen, Peter Meerwald-Stadler, Rob Herring,
linux-iio, devicetree, Jean-Baptiste Maneyrol, Stephan Gerhold
MPU-6880 seems to be very similar to MPU-6500 / MPU-6050 and it works
fine with some minor additions for the mpu6050 driver.
Add a compatible for it to the binding documentation.
Cc: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
---
Note: This applies only on top of the patch for the YAML conversion:
https://lore.kernel.org/linux-iio/20201128173343.390165-3-jic23@kernel.org/
I guess that one will be applied very soon so I think this is easier :)
Changes in v2: None :)
---
.../devicetree/bindings/iio/imu/invensense,mpu6050.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml
index 9268b6ca2afe..edbc2921aabd 100644
--- a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml
@@ -25,6 +25,7 @@ properties:
- invensense,mpu6050
- invensense,mpu6500
- invensense,mpu6515
+ - invensense,mpu6880
- invensense,mpu9150
- invensense,mpu9250
- invensense,mpu9255
--
2.29.2
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH v2 2/2] iio: imu: inv_mpu6050: Add support for MPU-6880 2020-12-02 10:46 [PATCH v2 1/2] dt-bindings: iio: imu: mpu6050: Document invensense,mpu6880 Stephan Gerhold @ 2020-12-02 10:46 ` Stephan Gerhold 2020-12-02 13:21 ` Jean-Baptiste Maneyrol 2020-12-02 13:20 ` [PATCH v2 1/2] dt-bindings: iio: imu: mpu6050: Document invensense,mpu6880 Jean-Baptiste Maneyrol 2020-12-09 19:59 ` Rob Herring 2 siblings, 1 reply; 6+ messages in thread From: Stephan Gerhold @ 2020-12-02 10:46 UTC (permalink / raw) To: Jonathan Cameron Cc: Lars-Peter Clausen, Peter Meerwald-Stadler, Rob Herring, linux-iio, devicetree, Jean-Baptiste Maneyrol, Stephan Gerhold MPU-6880 seems to be very similar to MPU-6500 and it works fine with some minor additions for the mpu6050 driver. Add the necessary defines for it and make it use the same registers as MPU-6500 but with a FIFO size of 4096. Cc: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> Signed-off-by: Stephan Gerhold <stephan@gerhold.net> --- I tested this on a Xiaomi Redmi 2 (or Wingtech WT88047). Changes in v2: - Mention support for MPU-6880 in Kconfig --- drivers/iio/imu/inv_mpu6050/Kconfig | 8 ++++---- drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 9 +++++++++ drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c | 5 +++++ drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h | 2 ++ drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c | 5 +++++ 5 files changed, 25 insertions(+), 4 deletions(-) diff --git a/drivers/iio/imu/inv_mpu6050/Kconfig b/drivers/iio/imu/inv_mpu6050/Kconfig index 7137ea6f25db..9c625517173a 100644 --- a/drivers/iio/imu/inv_mpu6050/Kconfig +++ b/drivers/iio/imu/inv_mpu6050/Kconfig @@ -16,8 +16,8 @@ config INV_MPU6050_I2C select REGMAP_I2C help This driver supports the Invensense MPU6050/9150, - MPU6500/6515/9250/9255, ICM20608/20609/20689, ICM20602/ICM20690 and - IAM20680 motion tracking devices over I2C. + MPU6500/6515/6880/9250/9255, ICM20608/20609/20689, ICM20602/ICM20690 + and IAM20680 motion tracking devices over I2C. This driver can be built as a module. The module will be called inv-mpu6050-i2c. @@ -28,7 +28,7 @@ config INV_MPU6050_SPI select REGMAP_SPI help This driver supports the Invensense MPU6000, - MPU6500/6515/9250/9255, ICM20608/20609/20689, ICM20602/ICM20690 and - IAM20680 motion tracking devices over SPI. + MPU6500/6515/6880/9250/9255, ICM20608/20609/20689, ICM20602/ICM20690 + and IAM20680 motion tracking devices over SPI. This driver can be built as a module. The module will be called inv-mpu6050-spi. diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c index 18a1898e3e34..453c51c79655 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c @@ -160,6 +160,14 @@ static const struct inv_mpu6050_hw hw_info[] = { .fifo_size = 512, .temp = {INV_MPU6500_TEMP_OFFSET, INV_MPU6500_TEMP_SCALE}, }, + { + .whoami = INV_MPU6880_WHOAMI_VALUE, + .name = "MPU6880", + .reg = ®_set_6500, + .config = &chip_config_6500, + .fifo_size = 4096, + .temp = {INV_MPU6500_TEMP_OFFSET, INV_MPU6500_TEMP_SCALE}, + }, { .whoami = INV_MPU6000_WHOAMI_VALUE, .name = "MPU6000", @@ -1323,6 +1331,7 @@ static int inv_check_and_setup_chip(struct inv_mpu6050_state *st) case INV_MPU6000: case INV_MPU6500: case INV_MPU6515: + case INV_MPU6880: case INV_MPU9250: case INV_MPU9255: /* reset signal path (required for spi connection) */ diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c index 28cfae1e61cf..95f16951c8f4 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c @@ -177,6 +177,7 @@ static const struct i2c_device_id inv_mpu_id[] = { {"mpu6050", INV_MPU6050}, {"mpu6500", INV_MPU6500}, {"mpu6515", INV_MPU6515}, + {"mpu6880", INV_MPU6880}, {"mpu9150", INV_MPU9150}, {"mpu9250", INV_MPU9250}, {"mpu9255", INV_MPU9255}, @@ -204,6 +205,10 @@ static const struct of_device_id inv_of_match[] = { .compatible = "invensense,mpu6515", .data = (void *)INV_MPU6515 }, + { + .compatible = "invensense,mpu6880", + .data = (void *)INV_MPU6880 + }, { .compatible = "invensense,mpu9150", .data = (void *)INV_MPU9150 diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h index eb522b38acf3..58188dc0dd13 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h @@ -70,6 +70,7 @@ enum inv_devices { INV_MPU6050, INV_MPU6500, INV_MPU6515, + INV_MPU6880, INV_MPU6000, INV_MPU9150, INV_MPU9250, @@ -373,6 +374,7 @@ struct inv_mpu6050_state { #define INV_MPU6000_WHOAMI_VALUE 0x68 #define INV_MPU6050_WHOAMI_VALUE 0x68 #define INV_MPU6500_WHOAMI_VALUE 0x70 +#define INV_MPU6880_WHOAMI_VALUE 0x78 #define INV_MPU9150_WHOAMI_VALUE 0x68 #define INV_MPU9250_WHOAMI_VALUE 0x71 #define INV_MPU9255_WHOAMI_VALUE 0x73 diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c index 6f968ce687e1..b056f3fe2561 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c @@ -70,6 +70,7 @@ static const struct spi_device_id inv_mpu_id[] = { {"mpu6000", INV_MPU6000}, {"mpu6500", INV_MPU6500}, {"mpu6515", INV_MPU6515}, + {"mpu6880", INV_MPU6880}, {"mpu9250", INV_MPU9250}, {"mpu9255", INV_MPU9255}, {"icm20608", INV_ICM20608}, @@ -96,6 +97,10 @@ static const struct of_device_id inv_of_match[] = { .compatible = "invensense,mpu6515", .data = (void *)INV_MPU6515 }, + { + .compatible = "invensense,mpu6880", + .data = (void *)INV_MPU6880 + }, { .compatible = "invensense,mpu9250", .data = (void *)INV_MPU9250 -- 2.29.2 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v2 2/2] iio: imu: inv_mpu6050: Add support for MPU-6880 2020-12-02 10:46 ` [PATCH v2 2/2] iio: imu: inv_mpu6050: Add support for MPU-6880 Stephan Gerhold @ 2020-12-02 13:21 ` Jean-Baptiste Maneyrol 0 siblings, 0 replies; 6+ messages in thread From: Jean-Baptiste Maneyrol @ 2020-12-02 13:21 UTC (permalink / raw) To: Stephan Gerhold, Jonathan Cameron Cc: Lars-Peter Clausen, Peter Meerwald-Stadler, Rob Herring, linux-iio@vger.kernel.org, devicetree@vger.kernel.org Perfect, thanks. Acked-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> From: Stephan Gerhold <stephan@gerhold.net> Sent: Wednesday, December 2, 2020 11:46 To: Jonathan Cameron <jic23@kernel.org> Cc: Lars-Peter Clausen <lars@metafoo.de>; Peter Meerwald-Stadler <pmeerw@pmeerw.net>; Rob Herring <robh+dt@kernel.org>; linux-iio@vger.kernel.org <linux-iio@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; Jean-Baptiste Maneyrol <JManeyrol@invensense.com>; Stephan Gerhold <stephan@gerhold.net> Subject: [PATCH v2 2/2] iio: imu: inv_mpu6050: Add support for MPU-6880 CAUTION: This email originated from outside of the organization. Please make sure the sender is who they say they are and do not click links or open attachments unless you recognize the sender and know the content is safe. MPU-6880 seems to be very similar to MPU-6500 and it works fine with some minor additions for the mpu6050 driver. Add the necessary defines for it and make it use the same registers as MPU-6500 but with a FIFO size of 4096. Cc: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> Signed-off-by: Stephan Gerhold <stephan@gerhold.net> --- I tested this on a Xiaomi Redmi 2 (or Wingtech WT88047). Changes in v2: - Mention support for MPU-6880 in Kconfig --- drivers/iio/imu/inv_mpu6050/Kconfig | 8 ++++---- drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 9 +++++++++ drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c | 5 +++++ drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h | 2 ++ drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c | 5 +++++ 5 files changed, 25 insertions(+), 4 deletions(-) diff --git a/drivers/iio/imu/inv_mpu6050/Kconfig b/drivers/iio/imu/inv_mpu6050/Kconfig index 7137ea6f25db..9c625517173a 100644 --- a/drivers/iio/imu/inv_mpu6050/Kconfig +++ b/drivers/iio/imu/inv_mpu6050/Kconfig @@ -16,8 +16,8 @@ config INV_MPU6050_I2C select REGMAP_I2C help This driver supports the Invensense MPU6050/9150, - MPU6500/6515/9250/9255, ICM20608/20609/20689, ICM20602/ICM20690 and - IAM20680 motion tracking devices over I2C. + MPU6500/6515/6880/9250/9255, ICM20608/20609/20689, ICM20602/ICM20690 + and IAM20680 motion tracking devices over I2C. This driver can be built as a module. The module will be called inv-mpu6050-i2c. @@ -28,7 +28,7 @@ config INV_MPU6050_SPI select REGMAP_SPI help This driver supports the Invensense MPU6000, - MPU6500/6515/9250/9255, ICM20608/20609/20689, ICM20602/ICM20690 and - IAM20680 motion tracking devices over SPI. + MPU6500/6515/6880/9250/9255, ICM20608/20609/20689, ICM20602/ICM20690 + and IAM20680 motion tracking devices over SPI. This driver can be built as a module. The module will be called inv-mpu6050-spi. diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c index 18a1898e3e34..453c51c79655 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c @@ -160,6 +160,14 @@ static const struct inv_mpu6050_hw hw_info[] = { .fifo_size = 512, .temp = {INV_MPU6500_TEMP_OFFSET, INV_MPU6500_TEMP_SCALE}, }, + { + .whoami = INV_MPU6880_WHOAMI_VALUE, + .name = "MPU6880", + .reg = ®_set_6500, + .config = &chip_config_6500, + .fifo_size = 4096, + .temp = {INV_MPU6500_TEMP_OFFSET, INV_MPU6500_TEMP_SCALE}, + }, { .whoami = INV_MPU6000_WHOAMI_VALUE, .name = "MPU6000", @@ -1323,6 +1331,7 @@ static int inv_check_and_setup_chip(struct inv_mpu6050_state *st) case INV_MPU6000: case INV_MPU6500: case INV_MPU6515: + case INV_MPU6880: case INV_MPU9250: case INV_MPU9255: /* reset signal path (required for spi connection) */ diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c index 28cfae1e61cf..95f16951c8f4 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c @@ -177,6 +177,7 @@ static const struct i2c_device_id inv_mpu_id[] = { {"mpu6050", INV_MPU6050}, {"mpu6500", INV_MPU6500}, {"mpu6515", INV_MPU6515}, + {"mpu6880", INV_MPU6880}, {"mpu9150", INV_MPU9150}, {"mpu9250", INV_MPU9250}, {"mpu9255", INV_MPU9255}, @@ -204,6 +205,10 @@ static const struct of_device_id inv_of_match[] = { .compatible = "invensense,mpu6515", .data = (void *)INV_MPU6515 }, + { + .compatible = "invensense,mpu6880", + .data = (void *)INV_MPU6880 + }, { .compatible = "invensense,mpu9150", .data = (void *)INV_MPU9150 diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h index eb522b38acf3..58188dc0dd13 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h @@ -70,6 +70,7 @@ enum inv_devices { INV_MPU6050, INV_MPU6500, INV_MPU6515, + INV_MPU6880, INV_MPU6000, INV_MPU9150, INV_MPU9250, @@ -373,6 +374,7 @@ struct inv_mpu6050_state { #define INV_MPU6000_WHOAMI_VALUE 0x68 #define INV_MPU6050_WHOAMI_VALUE 0x68 #define INV_MPU6500_WHOAMI_VALUE 0x70 +#define INV_MPU6880_WHOAMI_VALUE 0x78 #define INV_MPU9150_WHOAMI_VALUE 0x68 #define INV_MPU9250_WHOAMI_VALUE 0x71 #define INV_MPU9255_WHOAMI_VALUE 0x73 diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c index 6f968ce687e1..b056f3fe2561 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c @@ -70,6 +70,7 @@ static const struct spi_device_id inv_mpu_id[] = { {"mpu6000", INV_MPU6000}, {"mpu6500", INV_MPU6500}, {"mpu6515", INV_MPU6515}, + {"mpu6880", INV_MPU6880}, {"mpu9250", INV_MPU9250}, {"mpu9255", INV_MPU9255}, {"icm20608", INV_ICM20608}, @@ -96,6 +97,10 @@ static const struct of_device_id inv_of_match[] = { .compatible = "invensense,mpu6515", .data = (void *)INV_MPU6515 }, + { + .compatible = "invensense,mpu6880", + .data = (void *)INV_MPU6880 + }, { .compatible = "invensense,mpu9250", .data = (void *)INV_MPU9250 -- 2.29.2 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v2 1/2] dt-bindings: iio: imu: mpu6050: Document invensense,mpu6880 2020-12-02 10:46 [PATCH v2 1/2] dt-bindings: iio: imu: mpu6050: Document invensense,mpu6880 Stephan Gerhold 2020-12-02 10:46 ` [PATCH v2 2/2] iio: imu: inv_mpu6050: Add support for MPU-6880 Stephan Gerhold @ 2020-12-02 13:20 ` Jean-Baptiste Maneyrol 2020-12-09 19:59 ` Rob Herring 2 siblings, 0 replies; 6+ messages in thread From: Jean-Baptiste Maneyrol @ 2020-12-02 13:20 UTC (permalink / raw) To: Stephan Gerhold, Jonathan Cameron Cc: Lars-Peter Clausen, Peter Meerwald-Stadler, Rob Herring, linux-iio@vger.kernel.org, devicetree@vger.kernel.org Perfect, thanks. Acked-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> From: Stephan Gerhold <stephan@gerhold.net> Sent: Wednesday, December 2, 2020 11:46 To: Jonathan Cameron <jic23@kernel.org> Cc: Lars-Peter Clausen <lars@metafoo.de>; Peter Meerwald-Stadler <pmeerw@pmeerw.net>; Rob Herring <robh+dt@kernel.org>; linux-iio@vger.kernel.org <linux-iio@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; Jean-Baptiste Maneyrol <JManeyrol@invensense.com>; Stephan Gerhold <stephan@gerhold.net> Subject: [PATCH v2 1/2] dt-bindings: iio: imu: mpu6050: Document invensense,mpu6880 CAUTION: This email originated from outside of the organization. Please make sure the sender is who they say they are and do not click links or open attachments unless you recognize the sender and know the content is safe. MPU-6880 seems to be very similar to MPU-6500 / MPU-6050 and it works fine with some minor additions for the mpu6050 driver. Add a compatible for it to the binding documentation. Cc: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> Signed-off-by: Stephan Gerhold <stephan@gerhold.net> --- Note: This applies only on top of the patch for the YAML conversion: https://urldefense.proofpoint.com/v2/url?u=https-3A__lore.kernel.org_linux-2Diio_20201128173343.390165-2D3-2Djic23-40kernel.org_&d=DwIDAg&c=WoJWtq5JV8YrKnzRxvD8NxmTP_1wxfE0prPmo0NeZwg&r=4jiDX_1brsSWfCjfA6Ovj1d4h9MF8q7Xk5aBwG28mVk&m=7Gw_jalJwa1D4BnMzg_LfHmFCU9XHw85vFukmE0KiPM&s=wl10XQo2t0i1smI63VAGI6SEpE9866BnfB1CDdyDRAc&e= I guess that one will be applied very soon so I think this is easier :) Changes in v2: None :) --- .../devicetree/bindings/iio/imu/invensense,mpu6050.yaml | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml index 9268b6ca2afe..edbc2921aabd 100644 --- a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml +++ b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml @@ -25,6 +25,7 @@ properties: - invensense,mpu6050 - invensense,mpu6500 - invensense,mpu6515 + - invensense,mpu6880 - invensense,mpu9150 - invensense,mpu9250 - invensense,mpu9255 -- 2.29.2 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v2 1/2] dt-bindings: iio: imu: mpu6050: Document invensense,mpu6880 2020-12-02 10:46 [PATCH v2 1/2] dt-bindings: iio: imu: mpu6050: Document invensense,mpu6880 Stephan Gerhold 2020-12-02 10:46 ` [PATCH v2 2/2] iio: imu: inv_mpu6050: Add support for MPU-6880 Stephan Gerhold 2020-12-02 13:20 ` [PATCH v2 1/2] dt-bindings: iio: imu: mpu6050: Document invensense,mpu6880 Jean-Baptiste Maneyrol @ 2020-12-09 19:59 ` Rob Herring 2020-12-13 13:27 ` Jonathan Cameron 2 siblings, 1 reply; 6+ messages in thread From: Rob Herring @ 2020-12-09 19:59 UTC (permalink / raw) To: Stephan Gerhold Cc: Jean-Baptiste Maneyrol, devicetree, linux-iio, Lars-Peter Clausen, Rob Herring, Jonathan Cameron, Peter Meerwald-Stadler On Wed, 02 Dec 2020 11:46:55 +0100, Stephan Gerhold wrote: > MPU-6880 seems to be very similar to MPU-6500 / MPU-6050 and it works > fine with some minor additions for the mpu6050 driver. > Add a compatible for it to the binding documentation. > > Cc: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> > Signed-off-by: Stephan Gerhold <stephan@gerhold.net> > --- > Note: This applies only on top of the patch for the YAML conversion: > https://lore.kernel.org/linux-iio/20201128173343.390165-3-jic23@kernel.org/ > I guess that one will be applied very soon so I think this is easier :) > > Changes in v2: None :) > --- > .../devicetree/bindings/iio/imu/invensense,mpu6050.yaml | 1 + > 1 file changed, 1 insertion(+) > Acked-by: Rob Herring <robh@kernel.org> ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v2 1/2] dt-bindings: iio: imu: mpu6050: Document invensense,mpu6880 2020-12-09 19:59 ` Rob Herring @ 2020-12-13 13:27 ` Jonathan Cameron 0 siblings, 0 replies; 6+ messages in thread From: Jonathan Cameron @ 2020-12-13 13:27 UTC (permalink / raw) To: Rob Herring Cc: Stephan Gerhold, Jean-Baptiste Maneyrol, devicetree, linux-iio, Lars-Peter Clausen, Rob Herring, Peter Meerwald-Stadler On Wed, 9 Dec 2020 13:59:32 -0600 Rob Herring <robh@kernel.org> wrote: > On Wed, 02 Dec 2020 11:46:55 +0100, Stephan Gerhold wrote: > > MPU-6880 seems to be very similar to MPU-6500 / MPU-6050 and it works > > fine with some minor additions for the mpu6050 driver. > > Add a compatible for it to the binding documentation. > > > > Cc: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> > > Signed-off-by: Stephan Gerhold <stephan@gerhold.net> > > --- > > Note: This applies only on top of the patch for the YAML conversion: > > https://lore.kernel.org/linux-iio/20201128173343.390165-3-jic23@kernel.org/ > > I guess that one will be applied very soon so I think this is easier :) > > > > Changes in v2: None :) > > --- > > .../devicetree/bindings/iio/imu/invensense,mpu6050.yaml | 1 + > > 1 file changed, 1 insertion(+) > > > > Acked-by: Rob Herring <robh@kernel.org> Series applied to the togreg branch of iio.git and pushed out as testing to see if the autobuilders find anything interesting. Thanks, Jonathan ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2020-12-13 13:28 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2020-12-02 10:46 [PATCH v2 1/2] dt-bindings: iio: imu: mpu6050: Document invensense,mpu6880 Stephan Gerhold 2020-12-02 10:46 ` [PATCH v2 2/2] iio: imu: inv_mpu6050: Add support for MPU-6880 Stephan Gerhold 2020-12-02 13:21 ` Jean-Baptiste Maneyrol 2020-12-02 13:20 ` [PATCH v2 1/2] dt-bindings: iio: imu: mpu6050: Document invensense,mpu6880 Jean-Baptiste Maneyrol 2020-12-09 19:59 ` Rob Herring 2020-12-13 13:27 ` Jonathan Cameron
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).