From: Jonathan Cameron <jic23@kernel.org>
To: Nuno Sa <nuno.sa@analog.com>
Cc: <linux-iio@vger.kernel.org>,
Michael Hennerich <Michael.Hennerich@analog.com>,
Lars-Peter Clausen <lars@metafoo.de>
Subject: Re: [PATCH v3] iio: adis16480: support burst read function
Date: Sun, 18 Apr 2021 11:23:24 +0100 [thread overview]
Message-ID: <20210418112324.5b49356d@jic23-huawei> (raw)
In-Reply-To: <20210418105307.67fad41e@jic23-huawei>
On Sun, 18 Apr 2021 10:53:07 +0100
Jonathan Cameron <jic23@kernel.org> wrote:
> On Tue, 13 Apr 2021 11:28:14 +0200
> Nuno Sa <nuno.sa@analog.com> wrote:
>
> > Some supported devices support burst read function. This provides a method
> > for reading a batch of data (status, temperature, gyroscopes,
> > accelerometers, time stamp/data counter, and CRC code), which does not
> > require a stall time between each 16-bit segment and only requires one
> > command on the DIN line to initiate. Devices supporting this mode
> > are:
> >
> > * adis16495-1
> > * adis16495-2
> > * adis16495-3
> > * adis16497-1
> > * adis16497-2
> > * adis16497-3
> >
> > Signed-off-by: Nuno Sa <nuno.sa@analog.com>
>
> Applied and I've added the tag Lars gave for v2.
> If you intentionally drop someones tag, please call out why alongside
> your change log. Here the tweaks were fairly minor so I don't think
> there was any need to drop it.
>
> Appiled to the togreg branch of iio.git and pushed out as testing for
> the autobuilders to poke at it and see if we missed anything.
>
> Thanks,
>
> Jonathan
Backed out as I think this has the same narrow race you spotted in the
other series.
Jonathan
>
>
> > ---
> > Changes in v2:
> > * Return right away if offset == 4 (no valid transition found from
> > brurst_id to sys_flags).
> >
> > Changes in v3:
> > * Move crc32.h header;
> > * Return proper 'irqreturn_t' types in all error paths;
> > * Move 'adis->current_page = 0' to right after setting it;
> > * Restore spi max transfer in case 'spi_sync()' fails;
> > * Use 80 line chars for 'devm_adis_setup_buffer_and_trigger()'.
> >
> > drivers/iio/imu/adis16480.c | 164 +++++++++++++++++++++++++++++++++---
> > 1 file changed, 151 insertions(+), 13 deletions(-)
> >
> > diff --git a/drivers/iio/imu/adis16480.c b/drivers/iio/imu/adis16480.c
> > index f81b86690b76..f7026c804f3a 100644
> > --- a/drivers/iio/imu/adis16480.c
> > +++ b/drivers/iio/imu/adis16480.c
> > @@ -19,11 +19,15 @@
> > #include <linux/sysfs.h>
> > #include <linux/module.h>
> > #include <linux/lcm.h>
> > +#include <linux/swab.h>
> > +#include <linux/crc32.h>
> >
> > #include <linux/iio/iio.h>
> > #include <linux/iio/sysfs.h>
> > #include <linux/iio/buffer.h>
> > #include <linux/iio/imu/adis.h>
> > +#include <linux/iio/triggered_buffer.h>
> > +#include <linux/iio/trigger_consumer.h>
> >
> > #include <linux/debugfs.h>
> >
> > @@ -103,6 +107,12 @@
> > * Available only for ADIS1649x devices
> > */
> > #define ADIS16495_REG_SYNC_SCALE ADIS16480_REG(0x03, 0x10)
> > +#define ADIS16495_REG_BURST_CMD ADIS16480_REG(0x00, 0x7C)
> > +#define ADIS16495_BURST_ID 0xA5A5
> > +/* total number of segments in burst */
> > +#define ADIS16495_BURST_MAX_DATA 20
> > +/* spi max speed in burst mode */
> > +#define ADIS16495_BURST_MAX_SPEED 6000000
> >
> > #define ADIS16480_REG_SERIAL_NUM ADIS16480_REG(0x04, 0x20)
> >
> > @@ -163,6 +173,8 @@ struct adis16480 {
> > struct clk *ext_clk;
> > enum adis16480_clock_mode clk_mode;
> > unsigned int clk_freq;
> > + /* Alignment needed for the timestamp */
> > + __be16 data[ADIS16495_BURST_MAX_DATA] __aligned(8);
> > };
> >
> > static const char * const adis16480_int_pin_names[4] = {
> > @@ -863,7 +875,7 @@ static const char * const adis16480_status_error_msgs[] = {
> >
> > static int adis16480_enable_irq(struct adis *adis, bool enable);
> >
> > -#define ADIS16480_DATA(_prod_id, _timeouts) \
> > +#define ADIS16480_DATA(_prod_id, _timeouts, _burst_len) \
> > { \
> > .diag_stat_reg = ADIS16480_REG_DIAG_STS, \
> > .glob_cmd_reg = ADIS16480_REG_GLOB_CMD, \
> > @@ -887,6 +899,8 @@ static int adis16480_enable_irq(struct adis *adis, bool enable);
> > BIT(ADIS16480_DIAG_STAT_BARO_FAIL), \
> > .enable_irq = adis16480_enable_irq, \
> > .timeouts = (_timeouts), \
> > + .burst_reg_cmd = ADIS16495_REG_BURST_CMD, \
> > + .burst_len = (_burst_len), \
> > }
> >
> > static const struct adis_timeout adis16485_timeouts = {
> > @@ -931,7 +945,7 @@ static const struct adis16480_chip_info adis16480_chip_info[] = {
> > .int_clk = 2460000,
> > .max_dec_rate = 2048,
> > .filter_freqs = adis16480_def_filter_freqs,
> > - .adis_data = ADIS16480_DATA(16375, &adis16485_timeouts),
> > + .adis_data = ADIS16480_DATA(16375, &adis16485_timeouts, 0),
> > },
> > [ADIS16480] = {
> > .channels = adis16480_channels,
> > @@ -944,7 +958,7 @@ static const struct adis16480_chip_info adis16480_chip_info[] = {
> > .int_clk = 2460000,
> > .max_dec_rate = 2048,
> > .filter_freqs = adis16480_def_filter_freqs,
> > - .adis_data = ADIS16480_DATA(16480, &adis16480_timeouts),
> > + .adis_data = ADIS16480_DATA(16480, &adis16480_timeouts, 0),
> > },
> > [ADIS16485] = {
> > .channels = adis16485_channels,
> > @@ -957,7 +971,7 @@ static const struct adis16480_chip_info adis16480_chip_info[] = {
> > .int_clk = 2460000,
> > .max_dec_rate = 2048,
> > .filter_freqs = adis16480_def_filter_freqs,
> > - .adis_data = ADIS16480_DATA(16485, &adis16485_timeouts),
> > + .adis_data = ADIS16480_DATA(16485, &adis16485_timeouts, 0),
> > },
> > [ADIS16488] = {
> > .channels = adis16480_channels,
> > @@ -970,7 +984,7 @@ static const struct adis16480_chip_info adis16480_chip_info[] = {
> > .int_clk = 2460000,
> > .max_dec_rate = 2048,
> > .filter_freqs = adis16480_def_filter_freqs,
> > - .adis_data = ADIS16480_DATA(16488, &adis16485_timeouts),
> > + .adis_data = ADIS16480_DATA(16488, &adis16485_timeouts, 0),
> > },
> > [ADIS16490] = {
> > .channels = adis16485_channels,
> > @@ -984,7 +998,7 @@ static const struct adis16480_chip_info adis16480_chip_info[] = {
> > .max_dec_rate = 4250,
> > .filter_freqs = adis16495_def_filter_freqs,
> > .has_pps_clk_mode = true,
> > - .adis_data = ADIS16480_DATA(16490, &adis16495_timeouts),
> > + .adis_data = ADIS16480_DATA(16490, &adis16495_timeouts, 0),
> > },
> > [ADIS16495_1] = {
> > .channels = adis16485_channels,
> > @@ -998,7 +1012,9 @@ static const struct adis16480_chip_info adis16480_chip_info[] = {
> > .max_dec_rate = 4250,
> > .filter_freqs = adis16495_def_filter_freqs,
> > .has_pps_clk_mode = true,
> > - .adis_data = ADIS16480_DATA(16495, &adis16495_1_timeouts),
> > + /* 20 elements of 16bits */
> > + .adis_data = ADIS16480_DATA(16495, &adis16495_1_timeouts,
> > + ADIS16495_BURST_MAX_DATA * 2),
> > },
> > [ADIS16495_2] = {
> > .channels = adis16485_channels,
> > @@ -1012,7 +1028,9 @@ static const struct adis16480_chip_info adis16480_chip_info[] = {
> > .max_dec_rate = 4250,
> > .filter_freqs = adis16495_def_filter_freqs,
> > .has_pps_clk_mode = true,
> > - .adis_data = ADIS16480_DATA(16495, &adis16495_1_timeouts),
> > + /* 20 elements of 16bits */
> > + .adis_data = ADIS16480_DATA(16495, &adis16495_1_timeouts,
> > + ADIS16495_BURST_MAX_DATA * 2),
> > },
> > [ADIS16495_3] = {
> > .channels = adis16485_channels,
> > @@ -1026,7 +1044,9 @@ static const struct adis16480_chip_info adis16480_chip_info[] = {
> > .max_dec_rate = 4250,
> > .filter_freqs = adis16495_def_filter_freqs,
> > .has_pps_clk_mode = true,
> > - .adis_data = ADIS16480_DATA(16495, &adis16495_1_timeouts),
> > + /* 20 elements of 16bits */
> > + .adis_data = ADIS16480_DATA(16495, &adis16495_1_timeouts,
> > + ADIS16495_BURST_MAX_DATA * 2),
> > },
> > [ADIS16497_1] = {
> > .channels = adis16485_channels,
> > @@ -1040,7 +1060,9 @@ static const struct adis16480_chip_info adis16480_chip_info[] = {
> > .max_dec_rate = 4250,
> > .filter_freqs = adis16495_def_filter_freqs,
> > .has_pps_clk_mode = true,
> > - .adis_data = ADIS16480_DATA(16497, &adis16495_1_timeouts),
> > + /* 20 elements of 16bits */
> > + .adis_data = ADIS16480_DATA(16497, &adis16495_1_timeouts,
> > + ADIS16495_BURST_MAX_DATA * 2),
> > },
> > [ADIS16497_2] = {
> > .channels = adis16485_channels,
> > @@ -1054,7 +1076,9 @@ static const struct adis16480_chip_info adis16480_chip_info[] = {
> > .max_dec_rate = 4250,
> > .filter_freqs = adis16495_def_filter_freqs,
> > .has_pps_clk_mode = true,
> > - .adis_data = ADIS16480_DATA(16497, &adis16495_1_timeouts),
> > + /* 20 elements of 16bits */
> > + .adis_data = ADIS16480_DATA(16497, &adis16495_1_timeouts,
> > + ADIS16495_BURST_MAX_DATA * 2),
> > },
> > [ADIS16497_3] = {
> > .channels = adis16485_channels,
> > @@ -1068,10 +1092,123 @@ static const struct adis16480_chip_info adis16480_chip_info[] = {
> > .max_dec_rate = 4250,
> > .filter_freqs = adis16495_def_filter_freqs,
> > .has_pps_clk_mode = true,
> > - .adis_data = ADIS16480_DATA(16497, &adis16495_1_timeouts),
> > + /* 20 elements of 16bits */
> > + .adis_data = ADIS16480_DATA(16497, &adis16495_1_timeouts,
> > + ADIS16495_BURST_MAX_DATA * 2),
> > },
> > };
> >
> > +static bool adis16480_validate_crc(const u16 *buf, const u8 n_elem, const u32 crc)
> > +{
> > + u32 crc_calc;
> > + u16 crc_buf[15];
> > + int j;
> > +
> > + for (j = 0; j < n_elem; j++)
> > + crc_buf[j] = swab16(buf[j]);
> > +
> > + crc_calc = crc32(~0, crc_buf, n_elem * 2);
> > + crc_calc ^= ~0;
> > +
> > + return (crc == crc_calc);
> > +}
> > +
> > +static irqreturn_t adis16480_trigger_handler(int irq, void *p)
> > +{
> > + struct iio_poll_func *pf = p;
> > + struct iio_dev *indio_dev = pf->indio_dev;
> > + struct adis16480 *st = iio_priv(indio_dev);
> > + struct adis *adis = &st->adis;
> > + int ret, bit, offset, i = 0;
> > + __be16 *buffer;
> > + u32 crc;
> > + bool valid;
> > + const u32 cached_spi_speed_hz = adis->spi->max_speed_hz;
> > +
> > + adis_dev_lock(adis);
> > + if (adis->current_page != 0) {
> > + adis->tx[0] = ADIS_WRITE_REG(ADIS_REG_PAGE_ID);
> > + adis->tx[1] = 0;
> > + ret = spi_write(adis->spi, adis->tx, 2);
> > + if (ret) {
> > + dev_err(&adis->spi->dev, "Failed to change device page: %d\n", ret);
> > + adis_dev_unlock(adis);
> > + goto irq_done;
> > + }
> > +
> > + adis->current_page = 0;
> > + }
> > +
> > + adis->spi->max_speed_hz = ADIS16495_BURST_MAX_SPEED;
> > +
> > + ret = spi_sync(adis->spi, &adis->msg);
> > + if (ret) {
> > + dev_err(&adis->spi->dev, "Failed to read data: %d\n", ret);
> > + adis->spi->max_speed_hz = cached_spi_speed_hz;
> > + adis_dev_unlock(adis);
> > + goto irq_done;
> > + }
> > +
> > + adis->spi->max_speed_hz = cached_spi_speed_hz;
> > + adis_dev_unlock(adis);
> > +
> > + /*
> > + * After making the burst request, the response can have one or two
> > + * 16-bit responses containing the BURST_ID depending on the sclk. If
> > + * clk > 3.6MHz, then we will have two BURST_ID in a row. If clk < 3MHZ,
> > + * we have only one. To manage that variation, we use the transition from the
> > + * BURST_ID to the SYS_E_FLAG register, which will not be equal to 0xA5A5. If
> > + * we not find this variation in the first 4 segments, then the data should
> > + * not be valid.
> > + */
> > + buffer = adis->buffer;
> > + for (offset = 0; offset < 4; offset++) {
> > + u16 curr = be16_to_cpu(buffer[offset]);
> > + u16 next = be16_to_cpu(buffer[offset + 1]);
> > +
> > + if (curr == ADIS16495_BURST_ID && next != ADIS16495_BURST_ID) {
> > + offset++;
> > + break;
> > + }
> > + }
> > +
> > + if (offset == 4) {
> > + dev_err(&adis->spi->dev, "Invalid burst data\n");
> > + goto irq_done;
> > + }
> > +
> > + crc = be16_to_cpu(buffer[offset + 16]) << 16 | be16_to_cpu(buffer[offset + 15]);
> > + valid = adis16480_validate_crc((u16 *)&buffer[offset], 15, crc);
> > + if (!valid) {
> > + dev_err(&adis->spi->dev, "Invalid crc\n");
> > + goto irq_done;
> > + }
> > +
> > + for_each_set_bit(bit, indio_dev->active_scan_mask, indio_dev->masklength) {
> > + /*
> > + * When burst mode is used, temperature is the first data
> > + * channel in the sequence, but the temperature scan index
> > + * is 10.
> > + */
> > + switch (bit) {
> > + case ADIS16480_SCAN_TEMP:
> > + st->data[i++] = buffer[offset + 1];
> > + break;
> > + case ADIS16480_SCAN_GYRO_X ... ADIS16480_SCAN_ACCEL_Z:
> > + /* The lower register data is sequenced first */
> > + st->data[i++] = buffer[2 * bit + offset + 3];
> > + st->data[i++] = buffer[2 * bit + offset + 2];
> > + break;
> > + }
> > + }
> > +
> > + iio_push_to_buffers_with_timestamp(indio_dev, st->data, pf->timestamp);
> > +irq_done:
> > + iio_trigger_notify_done(indio_dev->trig);
> > +
> > + return IRQ_HANDLED;
> > +}
> > +
> > static const struct iio_info adis16480_info = {
> > .read_raw = &adis16480_read_raw,
> > .write_raw = &adis16480_write_raw,
> > @@ -1341,7 +1478,8 @@ static int adis16480_probe(struct spi_device *spi)
> > st->clk_freq = st->chip_info->int_clk;
> > }
> >
> > - ret = devm_adis_setup_buffer_and_trigger(&st->adis, indio_dev, NULL);
> > + ret = devm_adis_setup_buffer_and_trigger(&st->adis, indio_dev,
> > + adis16480_trigger_handler);
> > if (ret)
> > return ret;
> >
>
next prev parent reply other threads:[~2021-04-18 10:22 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-13 9:28 [PATCH v3] iio: adis16480: support burst read function Nuno Sa
2021-04-18 9:53 ` Jonathan Cameron
2021-04-18 10:23 ` Jonathan Cameron [this message]
2021-04-19 7:30 ` Sa, Nuno
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210418112324.5b49356d@jic23-huawei \
--to=jic23@kernel.org \
--cc=Michael.Hennerich@analog.com \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=nuno.sa@analog.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox