From: Jonathan Cameron <jic23@kernel.org>
To: linux-iio@vger.kernel.org
Cc: Lars-Peter Clausen <lars@metafoo.de>,
alexandru.tachici@analog.com,
Alexandru Ardelean <ardeleanalex@gmail.com>,
Jonathan Cameron <Jonathan.Cameron@huawei.com>
Subject: [PATCH 1/3] iio: adc: ad7124: Fix missbalanced regulator enable / disable on error.
Date: Sat, 8 May 2021 19:23:17 +0100 [thread overview]
Message-ID: <20210508182319.488551-2-jic23@kernel.org> (raw)
In-Reply-To: <20210508182319.488551-1-jic23@kernel.org>
From: Jonathan Cameron <Jonathan.Cameron@huawei.com>
If the devm_regulator_get() call succeeded but not the regulator_enable()
then regulator_disable() would be called on a regulator that was not
enabled.
Fix this by moving regulator enabling / disabling over to
devm_ management via devm_add_action_or_reset.
Fixes: b3af341bbd96 ("iio: adc: Add ad7124 support")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Alexandru Ardelean <ardeleanalex@gmail.com>
---
drivers/iio/adc/ad7124.c | 29 +++++++++++++----------------
1 file changed, 13 insertions(+), 16 deletions(-)
diff --git a/drivers/iio/adc/ad7124.c b/drivers/iio/adc/ad7124.c
index 766c73333604..c0d0870a29ff 100644
--- a/drivers/iio/adc/ad7124.c
+++ b/drivers/iio/adc/ad7124.c
@@ -707,6 +707,11 @@ static int ad7124_setup(struct ad7124_state *st)
return ret;
}
+static void ad7124_reg_disable(void *r)
+{
+ regulator_disable(r);
+}
+
static int ad7124_probe(struct spi_device *spi)
{
const struct ad7124_chip_info *info;
@@ -752,17 +757,20 @@ static int ad7124_probe(struct spi_device *spi)
ret = regulator_enable(st->vref[i]);
if (ret)
return ret;
+
+ ret = devm_add_action_or_reset(&spi->dev, ad7124_reg_disable,
+ st->vref[i]);
+ if (ret)
+ return ret;
}
st->mclk = devm_clk_get(&spi->dev, "mclk");
- if (IS_ERR(st->mclk)) {
- ret = PTR_ERR(st->mclk);
- goto error_regulator_disable;
- }
+ if (IS_ERR(st->mclk))
+ return PTR_ERR(st->mclk);
ret = clk_prepare_enable(st->mclk);
if (ret < 0)
- goto error_regulator_disable;
+ return ret;
ret = ad7124_soft_reset(st);
if (ret < 0)
@@ -792,11 +800,6 @@ static int ad7124_probe(struct spi_device *spi)
ad_sd_cleanup_buffer_and_trigger(indio_dev);
error_clk_disable_unprepare:
clk_disable_unprepare(st->mclk);
-error_regulator_disable:
- for (i = ARRAY_SIZE(st->vref) - 1; i >= 0; i--) {
- if (!IS_ERR_OR_NULL(st->vref[i]))
- regulator_disable(st->vref[i]);
- }
return ret;
}
@@ -805,17 +808,11 @@ static int ad7124_remove(struct spi_device *spi)
{
struct iio_dev *indio_dev = spi_get_drvdata(spi);
struct ad7124_state *st = iio_priv(indio_dev);
- int i;
iio_device_unregister(indio_dev);
ad_sd_cleanup_buffer_and_trigger(indio_dev);
clk_disable_unprepare(st->mclk);
- for (i = ARRAY_SIZE(st->vref) - 1; i >= 0; i--) {
- if (!IS_ERR_OR_NULL(st->vref[i]))
- regulator_disable(st->vref[i]);
- }
-
return 0;
}
--
2.31.1
next prev parent reply other threads:[~2021-05-08 18:24 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-08 18:23 [PATCH 0/3] iio: adc: ad7124: Fixes and devm_ for all of probe Jonathan Cameron
2021-05-08 18:23 ` Jonathan Cameron [this message]
2021-05-09 7:20 ` [PATCH 1/3] iio: adc: ad7124: Fix missbalanced regulator enable / disable on error Alexandru Ardelean
2021-05-08 18:23 ` [PATCH 2/3] iio: adc: ad7124: Fix potential overflow due to non sequential channel numbers Jonathan Cameron
2021-05-09 7:22 ` Alexandru Ardelean
2021-05-08 18:23 ` [PATCH 3/3] iio: adc: ad7124: Use devm_ managed calls for all of probe() + drop remove() Jonathan Cameron
2021-05-09 7:30 ` Alexandru Ardelean
2021-05-09 7:31 ` [PATCH 0/3] iio: adc: ad7124: Fixes and devm_ for all of probe Alexandru Ardelean
2021-05-09 9:35 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210508182319.488551-2-jic23@kernel.org \
--to=jic23@kernel.org \
--cc=Jonathan.Cameron@huawei.com \
--cc=alexandru.tachici@analog.com \
--cc=ardeleanalex@gmail.com \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox