Re: [PATCH v4] iio: adis16480: support burst read function

[Jonathan Cameron <jic23@kernel.org>]

On Tue, 18 May 2021 14:21:08 +0000
"Sa, Nuno" <Nuno.Sa@analog.com> wrote:

> Hi Jonathan,
> 
> > -----Original Message-----
> > From: Jonathan Cameron <jic23@kernel.org>
> > Sent: Saturday, May 8, 2021 4:57 PM
> > To: Sa, Nuno <Nuno.Sa@analog.com>
> > Cc: linux-iio@vger.kernel.org; Hennerich, Michael
> > <Michael.Hennerich@analog.com>; Lars-Peter Clausen
> > <lars@metafoo.de>
> > Subject: Re: [PATCH v4] iio: adis16480: support burst read function
> > 
> > [External]
> > 
> > On Tue, 4 May 2021 07:16:46 +0000
> > "Sa, Nuno" <Nuno.Sa@analog.com> wrote:
> >   
> > > > -----Original Message-----
> > > > From: Jonathan Cameron <jic23@kernel.org>
> > > > Sent: Saturday, April 24, 2021 1:32 PM
> > > > To: Sa, Nuno <Nuno.Sa@analog.com>
> > > > Cc: linux-iio@vger.kernel.org; Hennerich, Michael
> > > > <Michael.Hennerich@analog.com>; Lars-Peter Clausen
> > > > <lars@metafoo.de>
> > > > Subject: Re: [PATCH v4] iio: adis16480: support burst read function
> > > >
> > > > On Thu, 22 Apr 2021 12:37:35 +0200
> > > > Nuno Sa <nuno.sa@analog.com> wrote:
> > > >  
> > > > > Some supported devices support burst read function. This  
> > provides a  
> > > > method  
> > > > > for reading a batch of data (status, temperature, gyroscopes,
> > > > > accelerometers, time stamp/data counter, and CRC code), which  
> > > > does not  
> > > > > require a stall time between each 16-bit segment and only  
> > requires  
> > > > one  
> > > > > command on the DIN line to initiate. Devices supporting this  
> > mode  
> > > > > are:
> > > > >
> > > > >  * adis16495-1
> > > > >  * adis16495-2
> > > > >  * adis16495-3
> > > > >  * adis16497-1
> > > > >  * adis16497-2
> > > > >  * adis16497-3
> > > > >
> > > > > Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
> > > > > Signed-off-by: Nuno Sa <nuno.sa@analog.com>  
> > > >
> > > > Looks good to me.  Give me a poke if I seem to have lost it when
> > > > the dependency is in place.
> > > >  
> > >
> > > poking :) ...  
> > Thanks :)
> > Applied to the togreg branch of iio.git and pushed out as testing for
> > all the normal reasons.
> >   
> 
> Was this patch somehow lost? I was trying to sync up ADI internal tree and
> I cannot see this patch either in testing or togreg...
Odd.  Sorry about that. Now applied and pushed out as testing.

Jonathan

> 
> Thanks,
> - Nuno Sá