From: Jonathan Cameron <jic23@kernel.org>
To: linux-iio@vger.kernel.org,
Andy Shevchenko <andy.shevchenko@gmail.com>,
Nuno Sa <Nuno.Sa@analog.com>
Cc: "Linus Walleij" <linus.walleij@linaro.org>,
"Jan Kiszka" <jan.kiszka@siemens.com>,
"Jonathan Cameron" <Jonathan.Cameron@huawei.com>,
"Nuno Sá" <nuno.sa@analog.com>
Subject: [PATCH v2 4/4] iio: imu: adis16400: Fix buffer alignment requirements.
Date: Sun, 13 Jun 2021 16:10:39 +0100 [thread overview]
Message-ID: <20210613151039.569883-5-jic23@kernel.org> (raw)
In-Reply-To: <20210613151039.569883-1-jic23@kernel.org>
From: Jonathan Cameron <Jonathan.Cameron@huawei.com>
iio_push_to_buffers_with_timestamp() requires that the buffer
is 8 byte alignment to ensure an inserted timestamp is naturally aligned.
This requirement was not met here when burst mode is in use beause
of a leading u16. Use the new iio_push_to_buffers_with_ts_unaligned()
function that has more relaxed requirements.
It is somewhat complex to access that actual data length, but a
safe bound can be found by using scan_bytes - sizeof(timestamp) so that
is used in this path.
More efficient approaches exist, but this ensure correctness at the
cost of using a bounce buffer.
Fixes: 5075e0720d93 ("iio: imu: adis: generalize burst mode support")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
---
drivers/iio/imu/adis16400.c | 20 +++++++++++++++-----
1 file changed, 15 insertions(+), 5 deletions(-)
diff --git a/drivers/iio/imu/adis16400.c b/drivers/iio/imu/adis16400.c
index cb8d3ffab6fc..66a83ebd3109 100644
--- a/drivers/iio/imu/adis16400.c
+++ b/drivers/iio/imu/adis16400.c
@@ -648,13 +648,23 @@ static irqreturn_t adis16400_trigger_handler(int irq, void *p)
if (ret)
dev_err(&adis->spi->dev, "Failed to read data: %d\n", ret);
- if (st->variant->flags & ADIS16400_BURST_DIAG_STAT)
+ if (st->variant->flags & ADIS16400_BURST_DIAG_STAT) {
buffer = adis->buffer + sizeof(u16);
- else
- buffer = adis->buffer;
+ /*
+ * The size here is always larger than, or equal to the true
+ * size of the channel data. This may result in a larger copy
+ * than necessary, but as the target buffer will be
+ * buffer->scan_bytes this will be safe.
+ */
+ iio_push_to_buffers_with_ts_unaligned(indio_dev, buffer,
+ indio_dev->scan_bytes - sizeof(pf->timestamp),
+ pf->timestamp);
+ } else {
+ iio_push_to_buffers_with_timestamp(indio_dev,
+ adis->buffer,
+ pf->timestamp);
+ }
- iio_push_to_buffers_with_timestamp(indio_dev, buffer,
- pf->timestamp);
iio_trigger_notify_done(indio_dev->trig);
--
2.32.0
next prev parent reply other threads:[~2021-06-13 15:08 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-13 15:10 [PATCH v2 0/4] IIO: Alignment fixes part 4 - bounce buffers for the hard cases Jonathan Cameron
2021-06-13 15:10 ` [PATCH v2 1/4] iio: core: Introduce iio_push_to_buffers_with_ts_unaligned() Jonathan Cameron
2021-06-14 8:33 ` Sa, Nuno
2021-06-13 15:10 ` [PATCH v2 2/4] iio: adc: ti-adc108s102: Fix alignment of buffer pushed to iio buffers Jonathan Cameron
2021-06-13 15:10 ` [PATCH v2 3/4] iio: gyro: mpu3050: Fix alignment and size issues with buffers Jonathan Cameron
2021-06-13 15:10 ` Jonathan Cameron [this message]
2021-06-14 8:25 ` [PATCH v2 4/4] iio: imu: adis16400: Fix buffer alignment requirements Sa, Nuno
2021-07-18 14:55 ` [PATCH v2 0/4] IIO: Alignment fixes part 4 - bounce buffers for the hard cases Jonathan Cameron
2021-10-03 15:54 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210613151039.569883-5-jic23@kernel.org \
--to=jic23@kernel.org \
--cc=Jonathan.Cameron@huawei.com \
--cc=Nuno.Sa@analog.com \
--cc=andy.shevchenko@gmail.com \
--cc=jan.kiszka@siemens.com \
--cc=linus.walleij@linaro.org \
--cc=linux-iio@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).