Re: [PATCH v2 2/2] iio: proximity: vcnl3020: add threshold options

[Jonathan Cameron <jic23@kernel.org>]

On Mon, 21 Jun 2021 17:30:51 +0300
Ivan Mikhaylov <i.mikhaylov@yadro.com> wrote:

> Add the low/high threshold options.
> 
> Signed-off-by: Ivan Mikhaylov <i.mikhaylov@yadro.com>
Hi,
A few comments inline.

Thanks,

Jonathan

> ---
>  drivers/iio/proximity/vcnl3020.c | 95 ++++++++++++++++++++++++++++++++
>  1 file changed, 95 insertions(+)
> 
> diff --git a/drivers/iio/proximity/vcnl3020.c b/drivers/iio/proximity/vcnl3020.c
> index 2e65127d5359..f3320de014e4 100644
> --- a/drivers/iio/proximity/vcnl3020.c
> +++ b/drivers/iio/proximity/vcnl3020.c
> @@ -255,6 +255,91 @@ static bool vcnl3020_is_thr_enabled(struct vcnl3020_data *data)
>  	return !!(icr & VCNL_ICR_THRES_EN);
>  }
>  
> +static int vcnl3020_read_event(struct iio_dev *indio_dev,
> +			       const struct iio_chan_spec *chan,
> +			       enum iio_event_type type,
> +			       enum iio_event_direction dir,
> +			       enum iio_event_info info,
> +			       int *val, int *val2)
> +{
> +	int rc;
> +	struct vcnl3020_data *data = iio_priv(indio_dev);
> +	__be16 res;
> +
> +	switch (info) {
> +	case IIO_EV_INFO_VALUE:
> +		switch (dir) {
> +		case IIO_EV_DIR_RISING:
> +			rc = regmap_bulk_read(data->regmap, VCNL_PS_HI_THR_HI,
> +					      &res, sizeof(res));
> +			if (rc < 0)
> +				return rc;
> +			*val = be16_to_cpu(res);
> +			return IIO_VAL_INT;
> +		case IIO_EV_DIR_FALLING:
> +			rc = regmap_bulk_read(data->regmap, VCNL_PS_LO_THR_HI,
> +					      &res, sizeof(res));
> +			if (rc < 0)
> +				return rc;
> +			*val = be16_to_cpu(res);
> +			return IIO_VAL_INT;
> +		default:
> +			return -EINVAL;
> +		}
> +	default:
> +		return -EINVAL;
> +	}
> +}
> +
> +static int vcnl3020_write_event(struct iio_dev *indio_dev,
> +				const struct iio_chan_spec *chan,
> +				enum iio_event_type type,
> +				enum iio_event_direction dir,
> +				enum iio_event_info info,
> +				int val, int val2)
> +{
> +	int rc;
> +	__be16 buf;
> +	struct vcnl3020_data *data = iio_priv(indio_dev);
> +
> +	rc = iio_device_claim_direct_mode(indio_dev);
Why? 

The intent of that function is to protect against mode transitions, so we
can't move from sysfs type captures to interrupt driven ones whilst
a sysfs read is in progress.   That's not the case here (or in the existing
driver where this is used).   So I think what you really want is a locally
defined lock that allows you to ensure device state is consistent if
you have any read / modify / write cycles.

For these particular registers I'm not even seeing that. Regmap has it's
own locking to avoid concurrency issues inside it's functions, so I'm not
sure you need a lock at all.

> +	if (rc)
> +		return rc;
> +
> +	switch (info) {
> +	case IIO_EV_INFO_VALUE:
> +		switch (dir) {
> +		case IIO_EV_DIR_RISING:
> +			/* 16 bit word/ low * high */
> +			buf = cpu_to_be16(val);
> +			rc = regmap_bulk_write(data->regmap, VCNL_PS_HI_THR_HI,
> +					       &buf, sizeof(buf));
> +			if (rc < 0)
> +				goto out_release_direct_mode;
> +			rc = IIO_VAL_INT;
> +			goto out_release_direct_mode;
> +		case IIO_EV_DIR_FALLING:
> +			buf = cpu_to_be16(val);
> +			rc = regmap_bulk_write(data->regmap, VCNL_PS_LO_THR_HI,
> +					       &buf, sizeof(buf));
> +			if (rc < 0)
> +				goto out_release_direct_mode;
> +			rc = IIO_VAL_INT;
> +			goto out_release_direct_mode;
> +		default:
> +			rc = -EINVAL;
> +			goto out_release_direct_mode;
> +		}
> +	default:
> +		rc = -EINVAL;
> +		goto out_release_direct_mode;
> +	}
> +out_release_direct_mode:
> +	iio_device_release_direct_mode(indio_dev);
> +
> +	return rc;
> +}
> +
>  static int vcnl3020_enable_periodic(struct iio_dev *indio_dev,
>  				    struct vcnl3020_data *data)
>  {
> @@ -356,6 +441,14 @@ static int vcnl3020_read_event_config(struct iio_dev *indio_dev,
>  
>  static const struct iio_event_spec vcnl3020_event_spec[] = {
>  	{
> +		.type = IIO_EV_TYPE_THRESH,
> +		.dir = IIO_EV_DIR_RISING,
> +		.mask_separate = BIT(IIO_EV_INFO_VALUE),
> +	}, {
> +		.type = IIO_EV_TYPE_THRESH,
> +		.dir = IIO_EV_DIR_FALLING,
> +		.mask_separate = BIT(IIO_EV_INFO_VALUE),
> +	}, {
>  		.type = IIO_EV_TYPE_THRESH,
>  		.dir = IIO_EV_DIR_EITHER,
>  		.mask_separate = BIT(IIO_EV_INFO_ENABLE),
> @@ -445,6 +538,8 @@ static const struct iio_info vcnl3020_info = {
>  	.read_raw = vcnl3020_read_raw,
>  	.write_raw = vcnl3020_write_raw,
>  	.read_avail = vcnl3020_read_avail,
> +	.read_event_value = vcnl3020_read_event,
> +	.write_event_value = vcnl3020_write_event,
>  	.read_event_config = vcnl3020_read_event_config,
>  	.write_event_config = vcnl3020_write_event_config,
>  };