[PATCH AUTOSEL 5.12 016/104] iio: imu: st_lsm6dsx: correct ODR in header

[PATCH AUTOSEL 5.12 016/104] iio: imu: st_lsm6dsx: correct ODR in header

[Sasha Levin]

From: Sean Nyekjaer <sean@geanix.com>

[ Upstream commit f7d5c18a8c371c306d73757547c2e0d6cfc764b3 ]

Fix wrongly stated 13 Hz ODR for accelerometers, the correct ODR is 12.5 Hz

Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
index 7cedaab096a7..e8d242ee6743 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
@@ -15,19 +15,19 @@
  *
  * Supported sensors:
  * - LSM6DS3:
- *   - Accelerometer/Gyroscope supported ODR [Hz]: 13, 26, 52, 104, 208, 416
+ *   - Accelerometer/Gyroscope supported ODR [Hz]: 12.5, 26, 52, 104, 208, 416
  *   - Accelerometer supported full-scale [g]: +-2/+-4/+-8/+-16
  *   - Gyroscope supported full-scale [dps]: +-125/+-245/+-500/+-1000/+-2000
  *   - FIFO size: 8KB
  *
  * - LSM6DS3H/LSM6DSL/LSM6DSM/ISM330DLC/LSM6DS3TR-C:
- *   - Accelerometer/Gyroscope supported ODR [Hz]: 13, 26, 52, 104, 208, 416
+ *   - Accelerometer/Gyroscope supported ODR [Hz]: 12.5, 26, 52, 104, 208, 416
  *   - Accelerometer supported full-scale [g]: +-2/+-4/+-8/+-16
  *   - Gyroscope supported full-scale [dps]: +-125/+-245/+-500/+-1000/+-2000
  *   - FIFO size: 4KB
  *
  * - LSM6DSO/LSM6DSOX/ASM330LHH/LSM6DSR/ISM330DHCX/LSM6DST/LSM6DSOP:
- *   - Accelerometer/Gyroscope supported ODR [Hz]: 13, 26, 52, 104, 208, 416,
+ *   - Accelerometer/Gyroscope supported ODR [Hz]: 12.5, 26, 52, 104, 208, 416,
  *     833
  *   - Accelerometer supported full-scale [g]: +-2/+-4/+-8/+-16
  *   - Gyroscope supported full-scale [dps]: +-125/+-245/+-500/+-1000/+-2000
-- 
2.30.2

[PATCH AUTOSEL 5.12 017/104] iio: gyro: fxa21002c: Balance runtime pm + use pm_runtime_resume_and_get().

[Sasha Levin]

From: Jonathan Cameron <Jonathan.Cameron@huawei.com>

[ Upstream commit 41120ebbb1eb5e9dec93320e259d5b2c93226073 ]

In both the probe() error path and remove() pm_runtime_put_noidle()
is called which will decrement the runtime pm reference count.
However, there is no matching function to have raised the reference count.
Not this isn't a fix as the runtime pm core will stop the reference count
going negative anyway.

An alternative would have been to raise the count in these paths, but
it is not clear why that would be necessary.

Whilst we are here replace some boilerplate with pm_runtime_resume_and_get()
Found using coccicheck script under review at:
https://lore.kernel.org/lkml/20210427141946.2478411-1-Julia.Lawall@inria.fr/

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rui Miguel Silva <rui.silva@linaro.org>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/20210509113354.660190-2-jic23@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iio/gyro/fxas21002c_core.c | 11 +----------
 1 file changed, 1 insertion(+), 10 deletions(-)

diff --git a/drivers/iio/gyro/fxas21002c_core.c b/drivers/iio/gyro/fxas21002c_core.c
index b7523357d8eb..ec6bd15bd2d4 100644
--- a/drivers/iio/gyro/fxas21002c_core.c
+++ b/drivers/iio/gyro/fxas21002c_core.c
@@ -366,14 +366,7 @@ static int fxas21002c_write(struct fxas21002c_data *data,
 
 static int  fxas21002c_pm_get(struct fxas21002c_data *data)
 {
-	struct device *dev = regmap_get_device(data->regmap);
-	int ret;
-
-	ret = pm_runtime_get_sync(dev);
-	if (ret < 0)
-		pm_runtime_put_noidle(dev);
-
-	return ret;
+	return pm_runtime_resume_and_get(regmap_get_device(data->regmap));
 }
 
 static int  fxas21002c_pm_put(struct fxas21002c_data *data)
@@ -1005,7 +998,6 @@ int fxas21002c_core_probe(struct device *dev, struct regmap *regmap, int irq,
 pm_disable:
 	pm_runtime_disable(dev);
 	pm_runtime_set_suspended(dev);
-	pm_runtime_put_noidle(dev);
 
 	return ret;
 }
@@ -1019,7 +1011,6 @@ void fxas21002c_core_remove(struct device *dev)
 
 	pm_runtime_disable(dev);
 	pm_runtime_set_suspended(dev);
-	pm_runtime_put_noidle(dev);
 }
 EXPORT_SYMBOL_GPL(fxas21002c_core_remove);
 
-- 
2.30.2

[PATCH AUTOSEL 5.12 018/104] iio: magn: bmc150: Balance runtime pm + use pm_runtime_resume_and_get()

[Sasha Levin]

From: Jonathan Cameron <Jonathan.Cameron@huawei.com>

[ Upstream commit 264da512431495e542fcaf56ffe75e7df0e7db74 ]

probe() error paths after runtime pm is enabled, should disable it.
remove() should not call pm_runtime_put_noidle() as there is no
matching get() to have raised the reference count.  This case
has no affect a the runtime pm core protects against going negative.

Whilst here use pm_runtime_resume_and_get() to tidy things up a little.
coccicheck script didn't get this one due to complex code structure so
found by inspection.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/20210509113354.660190-12-jic23@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iio/magnetometer/bmc150_magn.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

diff --git a/drivers/iio/magnetometer/bmc150_magn.c b/drivers/iio/magnetometer/bmc150_magn.c
index b2f3129e1b4f..03d25c725533 100644
--- a/drivers/iio/magnetometer/bmc150_magn.c
+++ b/drivers/iio/magnetometer/bmc150_magn.c
@@ -262,7 +262,7 @@ static int bmc150_magn_set_power_state(struct bmc150_magn_data *data, bool on)
 	int ret;
 
 	if (on) {
-		ret = pm_runtime_get_sync(data->dev);
+		ret = pm_runtime_resume_and_get(data->dev);
 	} else {
 		pm_runtime_mark_last_busy(data->dev);
 		ret = pm_runtime_put_autosuspend(data->dev);
@@ -271,9 +271,6 @@ static int bmc150_magn_set_power_state(struct bmc150_magn_data *data, bool on)
 	if (ret < 0) {
 		dev_err(data->dev,
 			"failed to change power state to %d\n", on);
-		if (on)
-			pm_runtime_put_noidle(data->dev);
-
 		return ret;
 	}
 #endif
@@ -964,12 +961,14 @@ int bmc150_magn_probe(struct device *dev, struct regmap *regmap,
 	ret = iio_device_register(indio_dev);
 	if (ret < 0) {
 		dev_err(dev, "unable to register iio device\n");
-		goto err_buffer_cleanup;
+		goto err_disable_runtime_pm;
 	}
 
 	dev_dbg(dev, "Registered device %s\n", name);
 	return 0;
 
+err_disable_runtime_pm:
+	pm_runtime_disable(dev);
 err_buffer_cleanup:
 	iio_triggered_buffer_cleanup(indio_dev);
 err_free_irq:
@@ -993,7 +992,6 @@ int bmc150_magn_remove(struct device *dev)
 
 	pm_runtime_disable(dev);
 	pm_runtime_set_suspended(dev);
-	pm_runtime_put_noidle(dev);
 
 	iio_triggered_buffer_cleanup(indio_dev);
 
-- 
2.30.2