From: Jonathan Cameron <jic23@kernel.org>
To: Alexandru Ardelean <aardelean@deviqon.com>
Cc: linux-kernel@vger.kernel.org, linux-iio@vger.kernel.org
Subject: Re: [PATCH] iio: dac: ad5064: convert probe to full device-managed
Date: Sat, 18 Sep 2021 19:05:50 +0100 [thread overview]
Message-ID: <20210918190550.62a321ce@jic23-huawei> (raw)
In-Reply-To: <20210913115237.301310-1-aardelean@deviqon.com>
On Mon, 13 Sep 2021 14:52:37 +0300
Alexandru Ardelean <aardelean@deviqon.com> wrote:
> This change converts the probe of the AD5064 driver to use only
> device-managed functions.
>
> The regulator_bulk_disable() is passed on a devm_add_action_or_reset() hook
> and the devm_iio_device_register() can be used to register the IIO device.
>
> The driver has both I2C and SPI hooks inside, so all these can be removed.
>
> Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Applied to the togreg branch of iio.git and pushed out as testing for all the normal
tedious reasons about the fact we should actually build test it on lots of architectures
etc :)
Jonathan
> ---
> drivers/iio/dac/ad5064.c | 49 ++++++++++------------------------------
> 1 file changed, 12 insertions(+), 37 deletions(-)
>
> diff --git a/drivers/iio/dac/ad5064.c b/drivers/iio/dac/ad5064.c
> index dff623b65e4f..fd9cac4f6321 100644
> --- a/drivers/iio/dac/ad5064.c
> +++ b/drivers/iio/dac/ad5064.c
> @@ -843,6 +843,13 @@ static int ad5064_request_vref(struct ad5064_state *st, struct device *dev)
> return ret;
> }
>
> +static void ad5064_bulk_reg_disable(void *data)
> +{
> + struct ad5064_state *st = data;
> +
> + regulator_bulk_disable(ad5064_num_vref(st), st->vref_reg);
> +}
> +
> static int ad5064_probe(struct device *dev, enum ad5064_type type,
> const char *name, ad5064_write_func write)
> {
> @@ -858,7 +865,6 @@ static int ad5064_probe(struct device *dev, enum ad5064_type type,
>
> st = iio_priv(indio_dev);
> mutex_init(&st->lock);
> - dev_set_drvdata(dev, indio_dev);
>
> st->chip_info = &ad5064_chip_info_tbl[type];
> st->dev = dev;
> @@ -872,6 +878,10 @@ static int ad5064_probe(struct device *dev, enum ad5064_type type,
> ret = regulator_bulk_enable(ad5064_num_vref(st), st->vref_reg);
> if (ret)
> return ret;
> +
> + ret = devm_add_action_or_reset(dev, ad5064_bulk_reg_disable, st);
> + if (ret)
> + return ret;
> }
>
> indio_dev->name = name;
> @@ -887,30 +897,7 @@ static int ad5064_probe(struct device *dev, enum ad5064_type type,
> st->dac_cache[i] = midscale;
> }
>
> - ret = iio_device_register(indio_dev);
> - if (ret)
> - goto error_disable_reg;
> -
> - return 0;
> -
> -error_disable_reg:
> - if (!st->use_internal_vref)
> - regulator_bulk_disable(ad5064_num_vref(st), st->vref_reg);
> -
> - return ret;
> -}
> -
> -static int ad5064_remove(struct device *dev)
> -{
> - struct iio_dev *indio_dev = dev_get_drvdata(dev);
> - struct ad5064_state *st = iio_priv(indio_dev);
> -
> - iio_device_unregister(indio_dev);
> -
> - if (!st->use_internal_vref)
> - regulator_bulk_disable(ad5064_num_vref(st), st->vref_reg);
> -
> - return 0;
> + return devm_iio_device_register(dev, indio_dev);
> }
>
> #if IS_ENABLED(CONFIG_SPI_MASTER)
> @@ -932,11 +919,6 @@ static int ad5064_spi_probe(struct spi_device *spi)
> ad5064_spi_write);
> }
>
> -static int ad5064_spi_remove(struct spi_device *spi)
> -{
> - return ad5064_remove(&spi->dev);
> -}
> -
> static const struct spi_device_id ad5064_spi_ids[] = {
> {"ad5024", ID_AD5024},
> {"ad5025", ID_AD5025},
> @@ -963,7 +945,6 @@ static struct spi_driver ad5064_spi_driver = {
> .name = "ad5064",
> },
> .probe = ad5064_spi_probe,
> - .remove = ad5064_spi_remove,
> .id_table = ad5064_spi_ids,
> };
>
> @@ -1019,11 +1000,6 @@ static int ad5064_i2c_probe(struct i2c_client *i2c,
> ad5064_i2c_write);
> }
>
> -static int ad5064_i2c_remove(struct i2c_client *i2c)
> -{
> - return ad5064_remove(&i2c->dev);
> -}
> -
> static const struct i2c_device_id ad5064_i2c_ids[] = {
> {"ad5625", ID_AD5625 },
> {"ad5625r-1v25", ID_AD5625R_1V25 },
> @@ -1081,7 +1057,6 @@ static struct i2c_driver ad5064_i2c_driver = {
> .name = "ad5064",
> },
> .probe = ad5064_i2c_probe,
> - .remove = ad5064_i2c_remove,
> .id_table = ad5064_i2c_ids,
> };
>
prev parent reply other threads:[~2021-09-18 18:02 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-13 11:52 [PATCH] iio: dac: ad5064: convert probe to full device-managed Alexandru Ardelean
2021-09-18 18:05 ` Jonathan Cameron [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210918190550.62a321ce@jic23-huawei \
--to=jic23@kernel.org \
--cc=aardelean@deviqon.com \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox