From: Jonathan Cameron <jic23@kernel.org>
To: gregkh@linuxfoundation.org, linux-iio@vger.kernel.org
Cc: William Breathitt Gray <vilhelm.gray@gmail.com>
Subject: Re: [PULL] 1st set of IIO new device support, features and cleanup for the 5.16 cycle
Date: Sun, 17 Oct 2021 11:30:25 +0100 [thread overview]
Message-ID: <20211017113025.6667ff44@jic23-huawei> (raw)
In-Reply-To: <20211017112306.6674ae42@jic23-huawei>
Sorry, tag is in wrong place so please ignore this one.
v2 along shortly.
The counter pull request is correct.
On Sun, 17 Oct 2021 11:23:06 +0100
Jonathan Cameron <jic23@kernel.org> wrote:
> The following changes since commit 6880fa6c56601bb8ed59df6c30fd390cc5f6dd8f:
>
> Linux 5.15-rc1 (2021-09-12 16:28:37 -0700)
>
> are available in the Git repository at:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-5.16a-split
>
> for you to fetch changes up to be44089e3fdccf1f1c66e25f1dabaf8ec813d714:
>
> iio: light: ltr501: Add of_device_id table (2021-10-17 11:06:08 +0100)
>
> ----------------------------------------------------------------
> First set of IIO new device and feature support for the 5.16 cycle
>
> Counter subsystem changes now sent separately.
>
> This has been a busy cycle in both subsystems, so lots here and a few
> more stragglers to come next week.
>
> Big new feature in this cycle is probably output buffer support.
> This has been in the works for a very long time so it's great to see
> Mihail pick up the challenge and build upon his predecessors work to finally
> bring this feature to mainline.
>
> New device support
> ------------------
>
> * adi,adxl313
> - New driver and dt bindings for this low power accelerometer.
> * adi,adxl355
> - New driver and dt bindings for this accelerometer.
> - Later series adds buffer support.
> * asahi-kasei,ak8975
> - Minor additions to driver to support ak09916
> * aspeed,aspeed-adc
> - Substantial rework plus feature additions to add support for the
> ast2600 including a new dt bindings doc.
> * atmel,at91_sama5d2
> - Rework and support introduced for the sama7g5 parts.
> * maxim,max31865
> - New driver and bindings for this RTD temperature sensor chip.
> * nxp,imx8qxp
> - New driver and bindings for the ADC found on the i.MX 8QuadXPlus Soc.
> * senseair,sunrise
> - New driver and bindings for this family of carbon dioxide gas sensors.
> * sensiron,scd4x
> - New driver and bindings for this carbon dioxide gas sensor.
>
> New features
> ------------
>
> * Output buffer support. Works in a similar fashion to input buffers, but
> in this case userspace pushes data into the kfifo which is then drained
> to the device when a trigger occurs. Support added to the ad5766 DAC
> driver.
> * Core, devm_iio_map_array_register() to avoid need for
> devm_add_action_or_reset() based cleanup in fully managed allocation
> drivers.
> * Core iio_push_to_buffers_with_ts_unaligned() function to safely handle a
> few drivers where it really hard to ensure the correct data alignment in
> an iio_push_to_buffers_with_timestamp() call. Note this uses a bounce
> buffer so should be avoided whenever possible. Used in the ti,adc108s102,
> invense,mpu3050 and adi,adis16400. This closes the last known set
> of drivers with alignment issues at this interface.
> * maxim,max1027
> - Substantial rework to this driver main target of which was supporting
> use of other triggers than it's own EOC interrupt.
> - Transfer optimization.
> * nxp,fxls8962af
> - Threshold even support including using it as a wakeup source.
>
> Cleanups, minor fixes etc
> -------------------------
>
> Chances of a common type to multiple drivers:
>
> * devm_ conversion and drop of .remove() callbacks in:
> - adi,ad5064
> - adi,ad7291
> - adi,ad7303
> - adi,ad7746
> - adi,ad9832
> - adi,adis16080
> - dialog,da9150-gpadc
> - intel,mrfld_adc
> - marvell,berlin2
> - maxim,max1363
> - maxim,max44000
> - nuvoton,nau7802
> - st_sensors (includes a lot of rework!)
> - ti,ads8344
> - ti,lp8788
>
> * devm_platform_ioremap_resource() used to reduce boilerplate
> - cirrus,ep93xx
> - rockchip,saradc
> - stm,stm32-dac
>
> * Use dev_err_probe() in more places to both not print on deferred probe and
> ensure a reason for the deferral is available for debug purposes.
> - adi,ad8801
> - capella,cm36651
> - linear,ltc1660
> - maxim,ds4424
> - maxim,max5821
> - microchip,mcp4922
> - nxp,lpc18xx
> - onnn,noa1305
> - st,lsm9ds0
> - st,st_sensors
> - st,stm32-dac
> - ti,afe4403
> - ti,afe4404
> - ti,dac7311
>
> * Drop error returns in SPI and I2C remove() functions as they are ignored and
> long term plan is to change these all over to returning void. In some cases
> these patches just make it 'obvious' they always return 0 where it was the
> case before but not easy to tell.
> - adi,ad5380
> - adi,ad5446
> - adi,ad5686
> - adi,ad5592r
> - bosch,bma400
> - bosch,bmc150
> - fsl,mma7455
> - honeywell,hmc5843
> - kionix,kxsd9
> - maxim,max5487
> - meas,ms5611
> - ti,afe4403
>
> Driver specific changes
>
> * adi,ad5770r
> - Bring driver inline with documented bindings.
> * adi,ad7746
> - Trivial style fix
> * adi,ad7949
> - Express some magic values as the underlying parts via new #defines.
> - Make it work with SPI controllers that don't support 14 or 16 bit messages
> - Support selection of voltage reference from dt including expanding the
> dt-bindings to cover this new functionality.
> * adi,ad799x
> - Implement selection of external reference voltage on AD7991, AD7995 and
> AD7999.
> - Add missing dt-bindings doc for devices supported by this driver.
> * adi,adislib
> - Move interrupt startup to better location in startup flow.
> - Handle devices that cannot mask/unmask the drdy pin and must instead mask
> at the interrupt controller. Applies to the adis16460 and adis16475 from
> which we then drop equivalent code.
> * adi,ltc2983
> - Add support for optional reset pin.
> - Fail to probe if no channels specified in dt binding.
> * asahi-kasei,ak8975
> - dt-binding additions of missing vid-supply regulator.
> * aspeed,aspeed-adc
> - Typo fix.
> * fsl,mma7660
> - Mark acpi_device_id table __maybe_unused to avoid build warning.
> * fsl,imx25-gcq
> - Avoid initializing regulators that aren't used.
> * invensense,mpu3050
> - Drop a dead protection against a clash with the old input driver.
> * invensense,mpu6050
> - Rework code to not use strcpy() and hence avoid possibility of wrong sized
> buffers. Note this wasn't a bug, but the new code is a lot more readable.
> - Mark acpi_device_id table __maybe_unused to avoid build warning.
> * kionix,kxcjk1013
> - dt-binding addition to note it supports interrupts.
> * marvell,berlin2-adc
> - Enable COMPILE_TEST building.
> * maxim,max1027
> - Avoid returning success in an error path.
> * nxp,imx8qxp
> - Fix warning when runtime pm not enabled via __maybe_unused.
> * ricoh,rn5t618
> - Use the new devm_iio_map_array_register() instead of open coding the same.
> * samsung,exynos_adc
> - Improve kconfig help text.
> * st,lsm6dsx
> - Move max_fifo_size into the fifo_ops structure where the other configuration
> parameters are found.
> * st,st_sensors:
> - Reorder to ensure we turn the power off after removing userspace interfaces.
> * senseair,sunrise
> - Add missing I2C dependency.
> * ti,twl6030
> - Small code tidy up.
>
> ----------------------------------------------------------------
> Alexander Vorwerk (1):
> staging: iio: cdc: remove braces from single line if blocks
>
> Alexandru Ardelean (24):
> iio: st_sensors: disable regulators after device unregistration
> iio: st_sensors: remove st_sensors_deallocate_trigger() function
> iio: st_sensors: remove st_sensors_power_disable() function
> iio: st_sensors: remove all driver remove functions
> iio: st_sensors: remove reference to parent device object on st_sensor_data
> iio: adc: ti-ads8344: convert probe to device-managed
> iio: dac: ad7303: convert probe to full device-managed
> staging: iio: ad9832: convert probe to device-managed
> iio: dac: ad5064: convert probe to full device-managed
> iio: gyro: adis16080: use devm_iio_device_register() in probe
> iio: light: max44000: use device-managed functions in probe
> iio: adc: fsl-imx25-gcq: initialize regulators as needed
> iio: inkern: introduce devm_iio_map_array_register() short-hand function
> iio: adc: intel_mrfld_adc: convert probe to full device-managed
> iio: adc: axp288_adc: convert probe to full device-managed
> iio: adc: lp8788_adc: convert probe to full-device managed
> iio: adc: da9150-gpadc: convert probe to full-device managed
> iio: adc: nau7802: convert probe to full device-managed
> iio: adc: max1363: convert probe to full device-managed
> iio: adc: rn5t618-adc: use devm_iio_map_array_register() function
> iio: adc: berlin2-adc: convert probe to device-managed only
> iio: adc: Kconfig: add COMPILE_TEST dep for berlin2-adc
> iio: adc: ad7291: convert probe to device-managed only
> iio: triggered-buffer: extend support to configure output buffers
>
> Arnd Bergmann (1):
> iio: imx8qxp-adc: mark PM functions as __maybe_unused
>
> Billy Tsai (13):
> dt-bindings: iio: adc: Add ast2600-adc bindings
> iio: adc: aspeed: completes the bitfield declare.
> iio: adc: aspeed: Keep model data to driver data.
> iio: adc: aspeed: Restructure the model data
> iio: adc: aspeed: Add vref config function
> iio: adc: aspeed: Use model_data to set clk scaler.
> iio: adc: aspeed: Use devm_add_action_or_reset.
> iio: adc: aspeed: Support ast2600 adc.
> iio: adc: aspeed: Fix the calculate error of clock.
> iio: adc: aspeed: Add func to set sampling rate.
> iio: adc: aspeed: Add compensation phase.
> iio: adc: aspeed: Support battery sensing.
> iio: adc: aspeed: Get and set trimming data.
>
> Cai Huoqing (20):
> iio: ep93xx: Make use of the helper function devm_platform_ioremap_resource()
> iio: dac: stm32-dac: Make use of the helper function devm_platform_ioremap_resource()
> iio: adc: rockchip_saradc: Make use of the helper function devm_platform_ioremap_resource()
> iio: imx8qxp-adc: Add driver support for NXP IMX8QXP ADC
> dt-bindings: iio: adc: Add binding documentation for NXP IMX8QXP ADC
> MAINTAINERS: Add the driver info of the NXP IMX8QXP
> iio: dac: ad8801: Make use of the helper function dev_err_probe()
> iio: dac: lpc18xx_dac: Make use of the helper function dev_err_probe()
> iio: dac: ltc1660: Make use of the helper function dev_err_probe()
> iio: dac: ds4424: Make use of the helper function dev_err_probe()
> iio: dac: max5821: Make use of the helper function dev_err_probe()
> iio: dac: mcp4922: Make use of the helper function dev_err_probe()
> iio: dac: stm32-dac: Make use of the helper function dev_err_probe()
> iio: dac: ti-dac7311: Make use of the helper function dev_err_probe()
> iio: st_sensors: Make use of the helper function dev_err_probe()
> iio: st_lsm9ds0: Make use of the helper function dev_err_probe()
> iio: health: afe4403: Make use of the helper function dev_err_probe()
> iio: health: afe4404: Make use of the helper function dev_err_probe()
> iio: light: cm36651: Make use of the helper function dev_err_probe()
> iio: light: noa1305: Make use of the helper function dev_err_probe()
>
> Colin Ian King (1):
> iio: adc: aspeed: Fix spelling mistake "battey" -> "battery"
>
> Dan Carpenter (1):
> iio: adc: max1027: fix error code in max1027_wait_eoc()
>
> Daniel Palmer (2):
> iio: imu: inv_mpu6050: Mark acpi match table as maybe unused
> iio: accel: mma7660: Mark acpi match table as maybe unused
>
> David Heidelberg (2):
> dt-bindings: iio: kionix,kxcjk1013: driver support interrupts
> dt-bindings: iio: magnetometer: asahi-kasei,ak8975 add vid reg
>
> Eugen Hristev (8):
> dt-bindings: iio: adc: at91-sama5d2: add compatible for sama7g5-adc
> iio: adc: at91-sama5d2_adc: initialize hardware after clock is started
> iio: adc: at91-sama5d2_adc: remove unused definition
> iio: adc: at91-sama5d2_adc: convert to platform specific data structures
> iio: adc: at91-sama5d2_adc: add support for separate end of conversion registers
> iio: adc: at91-sama5d2_adc: add helper for COR register
> iio: adc: at91-sama5d2_adc: add support for sama7g5 device
> iio: adc: at91-sama5d2_adc: update copyright and authors information
>
> Florian Boor (2):
> iio: adc: ad799x: Implement selecting external reference voltage input on AD7991, AD7995 and AD7999.
> dt-bindings: iio: ad779x: Add binding document
>
> Jacopo Mondi (4):
> dt-bindings: iio: chemical: Document senseair,sunrise CO2 sensor
> iio: ABI: docs: Document Senseair Sunrise ABI
> iio: chemical: Add Senseair Sunrise 006-0-007 driver
> iio: ABI: Document in_concentration_co2_scale
>
> Jonathan Cameron (4):
> iio: core: Introduce iio_push_to_buffers_with_ts_unaligned()
> iio: adc: ti-adc108s102: Fix alignment of buffer pushed to iio buffers.
> iio: gyro: mpu3050: Fix alignment and size issues with buffers.
> iio: imu: adis16400: Fix buffer alignment requirements.
>
> Krzysztof Kozlowski (1):
> iio: adc: exynos: describe drivers in KConfig
>
> Lars-Peter Clausen (1):
> iio: kfifo-buffer: Add output buffer support
>
> Len Baker (1):
> drivers/iio: Remove all strcpy() uses
>
> Liam Beguin (5):
> iio: adc: ad7949: define and use bitfield names
> iio: adc: ad7949: enable use with non 14/16-bit controllers
> iio: adc: ad7949: add vref selection support
> dt-bindings: iio: adc: ad7949: update voltage reference bindings
> iio: adc: ad7949: use devm managed functions
>
> Lorenzo Bianconi (1):
> iio: imu: st_lsm6dsx: move max_fifo_size in st_lsm6dsx_fifo_ops
>
> Lucas Stankus (2):
> dt-bindings: iio: accel: Add binding documentation for ADXL313
> iio: accel: Add driver support for ADXL313
>
> Lukas Bulwahn (1):
> iio: gyro: remove dead config dependencies on INPUT_MPU3050
>
> Matt Ranostay (1):
> iio: magnetometer: ak8975: add AK09116 support
>
> Mihail Chindris (2):
> iio: Add output buffer support
> drivers:iio:dac:ad5766.c: Add trigger buffer
>
> Miquel Raynal (16):
> iio: adc: max1027: Fix style
> iio: adc: max1027: Drop extra warning message
> iio: adc: max1027: Drop useless debug messages
> iio: adc: max1027: Minimize the number of converted channels
> iio: adc: max1027: Rename a helper
> iio: adc: max1027: Create a helper to enable/disable the cnvst trigger
> iio: adc: max1027: Simplify the _set_trigger_state() helper
> iio: adc: max1027: Ensure a default cnvst trigger configuration
> iio: adc: max1027: Create a helper to configure the channels to scan
> iio: adc: max1027: Prevent single channel accesses during buffer reads
> iio: adc: max1027: Separate the IRQ handler from the read logic
> iio: adc: max1027: Introduce an end of conversion helper
> iio: adc: max1027: Stop requesting a threaded IRQ
> iio: adc: max1027: Use the EOC IRQ when populated for single reads
> iio: adc: max1027: Allow all kind of triggers to be used
> iio: adc: max1027: Don't reject external triggers when there is no IRQ
>
> Navin Sankar Velliangiri (2):
> iio: temperature: Add MAX31865 RTD Support
> dt-bindings: iio: temperature: add MAXIM max31865 support
>
> Nikita Travkin (4):
> dt-bindings: vendor-prefixes: Document liteon vendor prefix
> dt-bindings: iio: light: Document ltr501 light sensor bindings
> iio: light: ltr501: Add rudimentary regulator support
> iio: light: ltr501: Add of_device_id table
>
> Nuno Sá (7):
> iio: ad5770r: make devicetree property reading consistent
> iio: ltc2983: add support for optional reset gpio
> iio: ltc2983: fail probe if no channels are given
> iio: adis: do not disabe IRQs in 'adis_init()'
> iio: adis: handle devices that cannot unmask the drdy pin
> iio: adis16475: make use of the new unmasked_drdy flag
> iio: adis16460: make use of the new unmasked_drdy flag
>
> Puranjay Mohan (4):
> dt-bindings: iio: accel: Add DT binding doc for ADXL355
> iio: accel: Add driver support for ADXL355
> iio: accel: adxl355: use if(ret) in place of ret < 0
> iio: accel: adxl355: Add triggered buffer support
>
> Randy Dunlap (1):
> iio: chemical: SENSEAIR_SUNRISE_CO2 depends on I2C
>
> Roan van Dijk (4):
> dt-bindings: iio: chemical: sensirion,scd4x: Add yaml description
> MAINTAINERS: Add myself as maintainer of the scd4x driver
> drivers: iio: chemical: Add support for Sensirion SCD4x CO2 sensor
> iio: documentation: Document scd4x calibration use
>
> Sean Nyekjaer (2):
> iio: accel: fxls8962af: add threshold event handling
> iio: accel: fxls8962af: add wake on event
>
> Tang Bin (1):
> iio: adc: twl6030-gpadc: Use the defined variable to clean code
>
> Uwe Kleine-König (13):
> iio: accel: bma400: Make bma400_remove() return void
> iio: accel: bmc150: Make bmc150_accel_core_remove() return void
> iio: accel: bmi088: Make bmi088_accel_core_remove() return void
> iio: accel: kxsd9: Make kxsd9_common_remove() return void
> iio: accel: mma7455: Make mma7455_core_remove() return void
> iio: dac: ad5380: Make ad5380_remove() return void
> iio: dac: ad5446: Make ad5446_remove() return void
> iio: dac: ad5592r: Make ad5592r_remove() return void
> iio: dac: ad5686: Make ad5686_remove() return void
> iio: health: afe4403: Don't return an error in .remove()
> iio: magn: hmc5843: Make hmc5843_common_remove() return void
> iio: potentiometer: max5487: Don't return an error in .remove()
> iio: pressure: ms5611: Make ms5611_remove() return void
>
> Documentation/ABI/testing/sysfs-bus-iio | 42 ++
> .../ABI/testing/sysfs-bus-iio-chemical-sunrise-co2 | 38 +
> Documentation/ABI/testing/sysfs-bus-iio-scd30 | 34 -
> .../ABI/testing/sysfs-bus-iio-temperature-max31865 | 20 +
> .../devicetree/bindings/iio/accel/adi,adxl313.yaml | 86 +++
> .../devicetree/bindings/iio/accel/adi,adxl355.yaml | 88 +++
> .../bindings/iio/accel/kionix,kxcjk1013.yaml | 3 +
> .../devicetree/bindings/iio/adc/adi,ad7949.yaml | 51 +-
> .../devicetree/bindings/iio/adc/adi,ad799x.yaml | 73 ++
> .../bindings/iio/adc/aspeed,ast2600-adc.yaml | 100 +++
> .../bindings/iio/adc/atmel,sama5d2-adc.yaml | 1 +
> .../bindings/iio/adc/nxp,imx8qxp-adc.yaml | 78 +++
> .../bindings/iio/chemical/senseair,sunrise.yaml | 55 ++
> .../bindings/iio/chemical/sensirion,scd4x.yaml | 46 ++
> .../bindings/iio/light/liteon,ltr501.yaml | 51 ++
> .../iio/magnetometer/asahi-kasei,ak8975.yaml | 7 +
> .../bindings/iio/temperature/maxim,max31865.yaml | 52 ++
> .../devicetree/bindings/vendor-prefixes.yaml | 4 +
> Documentation/driver-api/driver-model/devres.rst | 1 +
> MAINTAINERS | 36 +
> drivers/iio/accel/Kconfig | 62 ++
> drivers/iio/accel/Makefile | 6 +
> drivers/iio/accel/adxl313.h | 54 ++
> drivers/iio/accel/adxl313_core.c | 332 +++++++++
> drivers/iio/accel/adxl313_i2c.c | 66 ++
> drivers/iio/accel/adxl313_spi.c | 92 +++
> drivers/iio/accel/adxl355.h | 21 +
> drivers/iio/accel/adxl355_core.c | 765 +++++++++++++++++++++
> drivers/iio/accel/adxl355_i2c.c | 62 ++
> drivers/iio/accel/adxl355_spi.c | 65 ++
> drivers/iio/accel/adxl372.c | 1 +
> drivers/iio/accel/bma400.h | 2 +-
> drivers/iio/accel/bma400_core.c | 7 +-
> drivers/iio/accel/bma400_i2c.c | 4 +-
> drivers/iio/accel/bma400_spi.c | 4 +-
> drivers/iio/accel/bmc150-accel-core.c | 5 +-
> drivers/iio/accel/bmc150-accel-i2c.c | 4 +-
> drivers/iio/accel/bmc150-accel-spi.c | 4 +-
> drivers/iio/accel/bmc150-accel.h | 2 +-
> drivers/iio/accel/bmi088-accel-core.c | 4 +-
> drivers/iio/accel/bmi088-accel-spi.c | 4 +-
> drivers/iio/accel/bmi088-accel.h | 2 +-
> drivers/iio/accel/fxls8962af-core.c | 347 +++++++++-
> drivers/iio/accel/kxsd9-i2c.c | 4 +-
> drivers/iio/accel/kxsd9-spi.c | 4 +-
> drivers/iio/accel/kxsd9.c | 4 +-
> drivers/iio/accel/kxsd9.h | 2 +-
> drivers/iio/accel/mma7455.h | 2 +-
> drivers/iio/accel/mma7455_core.c | 4 +-
> drivers/iio/accel/mma7455_i2c.c | 4 +-
> drivers/iio/accel/mma7455_spi.c | 4 +-
> drivers/iio/accel/mma7660.c | 2 +-
> drivers/iio/accel/st_accel_core.c | 31 +-
> drivers/iio/accel/st_accel_i2c.c | 23 +-
> drivers/iio/accel/st_accel_spi.c | 23 +-
> drivers/iio/adc/Kconfig | 18 +-
> drivers/iio/adc/Makefile | 1 +
> drivers/iio/adc/ad7291.c | 70 +-
> drivers/iio/adc/ad7949.c | 254 +++++--
> drivers/iio/adc/ad799x.c | 68 +-
> drivers/iio/adc/aspeed_adc.c | 598 +++++++++++++---
> drivers/iio/adc/at91-sama5d2_adc.c | 598 +++++++++++-----
> drivers/iio/adc/axp288_adc.c | 28 +-
> drivers/iio/adc/berlin2-adc.c | 34 +-
> drivers/iio/adc/da9150-gpadc.c | 27 +-
> drivers/iio/adc/ep93xx_adc.c | 4 +-
> drivers/iio/adc/fsl-imx25-gcq.c | 55 +-
> drivers/iio/adc/imx8qxp-adc.c | 494 +++++++++++++
> drivers/iio/adc/intel_mrfld_adc.c | 24 +-
> drivers/iio/adc/lp8788_adc.c | 31 +-
> drivers/iio/adc/max1027.c | 278 +++++---
> drivers/iio/adc/max1363.c | 82 +--
> drivers/iio/adc/nau7802.c | 50 +-
> drivers/iio/adc/rn5t618-adc.c | 13 +-
> drivers/iio/adc/rockchip_saradc.c | 4 +-
> drivers/iio/adc/ti-adc108s102.c | 11 +-
> drivers/iio/adc/ti-ads8344.c | 27 +-
> drivers/iio/adc/twl6030-gpadc.c | 6 +-
> drivers/iio/buffer/industrialio-triggered-buffer.c | 8 +-
> drivers/iio/buffer/kfifo_buf.c | 50 ++
> drivers/iio/chemical/Kconfig | 24 +
> drivers/iio/chemical/Makefile | 2 +
> drivers/iio/chemical/scd4x.c | 691 +++++++++++++++++++
> drivers/iio/chemical/sunrise_co2.c | 537 +++++++++++++++
> .../iio/common/hid-sensors/hid-sensor-trigger.c | 5 +-
> drivers/iio/common/st_sensors/st_sensors_core.c | 48 +-
> drivers/iio/common/st_sensors/st_sensors_i2c.c | 1 -
> drivers/iio/common/st_sensors/st_sensors_spi.c | 1 -
> drivers/iio/common/st_sensors/st_sensors_trigger.c | 53 +-
> drivers/iio/dac/ad5064.c | 49 +-
> drivers/iio/dac/ad5380.c | 15 +-
> drivers/iio/dac/ad5446.c | 12 +-
> drivers/iio/dac/ad5592r-base.c | 4 +-
> drivers/iio/dac/ad5592r-base.h | 2 +-
> drivers/iio/dac/ad5592r.c | 4 +-
> drivers/iio/dac/ad5593r.c | 4 +-
> drivers/iio/dac/ad5686-spi.c | 4 +-
> drivers/iio/dac/ad5686.c | 4 +-
> drivers/iio/dac/ad5686.h | 2 +-
> drivers/iio/dac/ad5696-i2c.c | 4 +-
> drivers/iio/dac/ad5766.c | 42 ++
> drivers/iio/dac/ad5770r.c | 2 +-
> drivers/iio/dac/ad7303.c | 47 +-
> drivers/iio/dac/ad8801.c | 11 +-
> drivers/iio/dac/ds4424.c | 9 +-
> drivers/iio/dac/lpc18xx_dac.c | 14 +-
> drivers/iio/dac/ltc1660.c | 7 +-
> drivers/iio/dac/max5821.c | 9 +-
> drivers/iio/dac/mcp4922.c | 7 +-
> drivers/iio/dac/stm32-dac-core.c | 18 +-
> drivers/iio/dac/ti-dac7311.c | 7 +-
> drivers/iio/gyro/Kconfig | 1 -
> drivers/iio/gyro/adis16080.c | 11 +-
> drivers/iio/gyro/mpu3050-core.c | 24 +-
> drivers/iio/gyro/st_gyro_core.c | 27 +-
> drivers/iio/gyro/st_gyro_i2c.c | 23 +-
> drivers/iio/gyro/st_gyro_spi.c | 23 +-
> drivers/iio/health/afe4403.c | 14 +-
> drivers/iio/health/afe4404.c | 8 +-
> drivers/iio/iio_core.h | 4 +
> drivers/iio/imu/adis.c | 17 +-
> drivers/iio/imu/adis16400.c | 20 +-
> drivers/iio/imu/adis16460.c | 18 +-
> drivers/iio/imu/adis16475.c | 19 +-
> drivers/iio/imu/adis_trigger.c | 4 +
> drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c | 2 +-
> drivers/iio/imu/inv_mpu6050/inv_mpu_magn.c | 36 +-
> drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 4 +-
> drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 16 +-
> drivers/iio/imu/st_lsm9ds0/st_lsm9ds0.h | 1 -
> drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_core.c | 29 +-
> drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_i2c.c | 6 -
> drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_spi.c | 6 -
> drivers/iio/industrialio-buffer.c | 173 ++++-
> drivers/iio/industrialio-core.c | 1 +
> drivers/iio/inkern.c | 17 +
> drivers/iio/light/cm36651.c | 7 +-
> drivers/iio/light/ltr501.c | 37 +
> drivers/iio/light/max44000.c | 17 +-
> drivers/iio/light/noa1305.c | 7 +-
> drivers/iio/magnetometer/Kconfig | 2 +-
> drivers/iio/magnetometer/ak8975.c | 35 +
> drivers/iio/magnetometer/hmc5843.h | 2 +-
> drivers/iio/magnetometer/hmc5843_core.c | 4 +-
> drivers/iio/magnetometer/hmc5843_i2c.c | 4 +-
> drivers/iio/magnetometer/hmc5843_spi.c | 4 +-
> drivers/iio/magnetometer/st_magn_core.c | 29 +-
> drivers/iio/magnetometer/st_magn_i2c.c | 23 +-
> drivers/iio/magnetometer/st_magn_spi.c | 23 +-
> drivers/iio/potentiometer/max5487.c | 7 +-
> drivers/iio/pressure/ms5611.h | 2 +-
> drivers/iio/pressure/ms5611_core.c | 4 +-
> drivers/iio/pressure/ms5611_i2c.c | 4 +-
> drivers/iio/pressure/ms5611_spi.c | 4 +-
> drivers/iio/pressure/st_pressure_core.c | 27 +-
> drivers/iio/pressure/st_pressure_i2c.c | 23 +-
> drivers/iio/pressure/st_pressure_spi.c | 23 +-
> drivers/iio/temperature/Kconfig | 10 +
> drivers/iio/temperature/Makefile | 1 +
> drivers/iio/temperature/ltc2983.c | 16 +
> drivers/iio/temperature/max31865.c | 349 ++++++++++
> drivers/staging/iio/cdc/ad7746.c | 4 +-
> drivers/staging/iio/frequency/ad9832.c | 82 +--
> include/linux/iio/buffer.h | 11 +
> include/linux/iio/buffer_impl.h | 11 +
> include/linux/iio/common/st_sensors.h | 13 -
> include/linux/iio/driver.h | 14 +
> include/linux/iio/iio-opaque.h | 4 +
> include/linux/iio/imu/adis.h | 2 +
> include/linux/iio/triggered_buffer.h | 11 +-
> 170 files changed, 7088 insertions(+), 1592 deletions(-)
> create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-chemical-sunrise-co2
> delete mode 100644 Documentation/ABI/testing/sysfs-bus-iio-scd30
> create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-temperature-max31865
> create mode 100644 Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml
> create mode 100644 Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml
> create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad799x.yaml
> create mode 100644 Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml
> create mode 100644 Documentation/devicetree/bindings/iio/adc/nxp,imx8qxp-adc.yaml
> create mode 100644 Documentation/devicetree/bindings/iio/chemical/senseair,sunrise.yaml
> create mode 100644 Documentation/devicetree/bindings/iio/chemical/sensirion,scd4x.yaml
> create mode 100644 Documentation/devicetree/bindings/iio/light/liteon,ltr501.yaml
> create mode 100644 Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml
> create mode 100644 drivers/iio/accel/adxl313.h
> create mode 100644 drivers/iio/accel/adxl313_core.c
> create mode 100644 drivers/iio/accel/adxl313_i2c.c
> create mode 100644 drivers/iio/accel/adxl313_spi.c
> create mode 100644 drivers/iio/accel/adxl355.h
> create mode 100644 drivers/iio/accel/adxl355_core.c
> create mode 100644 drivers/iio/accel/adxl355_i2c.c
> create mode 100644 drivers/iio/accel/adxl355_spi.c
> create mode 100644 drivers/iio/adc/imx8qxp-adc.c
> create mode 100644 drivers/iio/chemical/scd4x.c
> create mode 100644 drivers/iio/chemical/sunrise_co2.c
> create mode 100644 drivers/iio/temperature/max31865.c
prev parent reply other threads:[~2021-10-17 10:26 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-17 10:23 [PULL] 1st set of IIO new device support, features and cleanup for the 5.16 cycle Jonathan Cameron
2021-10-17 10:28 ` Jonathan Cameron
2021-10-17 10:30 ` Jonathan Cameron [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211017113025.6667ff44@jic23-huawei \
--to=jic23@kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-iio@vger.kernel.org \
--cc=vilhelm.gray@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox