From: Jonathan Cameron <jic23@kernel.org>
To: Maslov Dmitry <maslovdmitry@seeed.cc>
Cc: linux-iio@vger.kernel.org, lars@metafoo.de,
andy.shevchenko@gmail.com, north_sea@qq.com, baozhu.zuo@seeed.cc,
jian.xiong@seeed.cc
Subject: Re: [PATCH] iio: light: ltr501: Added ltr303 driver support
Date: Thu, 28 Oct 2021 14:58:59 +0100 [thread overview]
Message-ID: <20211028145859.3ea79669@jic23-huawei> (raw)
In-Reply-To: <20211025213023.7309-1-maslovdmitry@seeed.cc>
On Mon, 25 Oct 2021 23:30:23 +0200
Maslov Dmitry <maslovdmitry@seeed.cc> wrote:
> Previously ltr501 driver supported a number of light and,
> proximity sensors including ltr501, ltr559 and ltr301.
> This adds support for another light sensor ltr303
> used in Seeed Studio reTerminal, a carrier board
> for Raspberry Pi 4 CM.
>
> It is a fix of previous commit, that simplified ltr303 support
> and removed a lot of unnecessary code. Filename has also been removed
> from the file.
>
> Signed-off-by: Maslov Dmitry <maslovdmitry@seeed.cc>
I missed that email should have had the subject
[PATCH v2] iio: light: ltr501: Add ltr303 support
> ---
> drivers/iio/light/ltr501.c | 21 ++++++++++++++++++++-
> 1 file changed, 20 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/iio/light/ltr501.c b/drivers/iio/light/ltr501.c
> index 7e51aaac0bf..d92d324d5e3 100644
> --- a/drivers/iio/light/ltr501.c
> +++ b/drivers/iio/light/ltr501.c
> @@ -1,6 +1,7 @@
> // SPDX-License-Identifier: GPL-2.0-only
> /*
> - * ltr501.c - Support for Lite-On LTR501 ambient light and proximity sensor
> + * Support for Lite-On LTR501, LTR509, LTR301, LTR303 ambient light
> + * and proximity sensors (only LTR5xx)
> *
> * Copyright 2014 Peter Meerwald <pmeerw@pmeerw.net>
> *
> @@ -98,6 +99,9 @@ enum {
> ltr501 = 0,
> ltr559,
> ltr301,
> + ltr303,
> +
> + ltr_max
> };
>
> struct ltr501_gain {
> @@ -1231,6 +1235,18 @@ static const struct ltr501_chip_info ltr501_chip_info_tbl[] = {
> .channels = ltr301_channels,
> .no_channels = ARRAY_SIZE(ltr301_channels),
> },
> + [ltr303] = {
> + .partid = 0x0A,
> + .als_gain = ltr559_als_gain_tbl,
> + .als_gain_tbl_size = ARRAY_SIZE(ltr559_als_gain_tbl),
> + .als_mode_active = BIT(0),
> + .als_gain_mask = BIT(2) | BIT(3) | BIT(4),
> + .als_gain_shift = 2,
> + .info = <r301_info,
> + .info_no_irq = <r301_info_no_irq,
> + .channels = ltr301_channels,
> + .no_channels = ARRAY_SIZE(ltr301_channels),
> + },
> };
>
> static int ltr501_write_contr(struct ltr501_data *data, u8 als_val, u8 ps_val)
> @@ -1597,6 +1613,7 @@ static const struct acpi_device_id ltr_acpi_match[] = {
> {"LTER0501", ltr501},
> {"LTER0559", ltr559},
> {"LTER0301", ltr301},
> + {"LTER0303", ltr303},
> { },
> };
> MODULE_DEVICE_TABLE(acpi, ltr_acpi_match);
> @@ -1605,6 +1622,7 @@ static const struct i2c_device_id ltr501_id[] = {
> { "ltr501", ltr501},
> { "ltr559", ltr559},
> { "ltr301", ltr301},
> + { "ltr303", ltr303},
> { }
> };
> MODULE_DEVICE_TABLE(i2c, ltr501_id);
> @@ -1613,6 +1631,7 @@ static const struct of_device_id ltr501_of_match[] = {
> { .compatible = "liteon,ltr501", },
> { .compatible = "liteon,ltr559", },
> { .compatible = "liteon,ltr301", },
> + { .compatible = "liteon,ltr303", },
> {}
> };
> MODULE_DEVICE_TABLE(of, ltr501_of_match);
next prev parent reply other threads:[~2021-10-28 13:54 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-25 21:30 [PATCH] iio: light: ltr501: Added ltr303 driver support Maslov Dmitry
2021-10-28 13:58 ` Jonathan Cameron [this message]
-- strict thread matches above, loose matches on Subject: below --
2021-10-20 7:35 Maslov Dmitry
2021-10-20 7:53 ` Lars-Peter Clausen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211028145859.3ea79669@jic23-huawei \
--to=jic23@kernel.org \
--cc=andy.shevchenko@gmail.com \
--cc=baozhu.zuo@seeed.cc \
--cc=jian.xiong@seeed.cc \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=maslovdmitry@seeed.cc \
--cc=north_sea@qq.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox