public inbox for linux-iio@vger.kernel.org
 help / color / mirror / Atom feed
From: Jonathan Cameron <jic23@kernel.org>
To: <alexandru.tachici@analog.com>
Cc: <linux-iio@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v2 6/8] iio: adc: ad7192: add sequencer support
Date: Sat, 19 Mar 2022 16:11:35 +0000	[thread overview]
Message-ID: <20220319161135.5c7153e7@jic23-huawei> (raw)
In-Reply-To: <20220318162722.51215-7-alexandru.tachici@analog.com>

On Fri, 18 Mar 2022 18:27:20 +0200
<alexandru.tachici@analog.com> wrote:

> From: Alexandru Tachici <alexandru.tachici@analog.com>
> 
> Add sequencer support for AD7192.
> 
> Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
> ---
>  drivers/iio/adc/ad7192.c | 16 +++++++++++++++-
>  1 file changed, 15 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/iio/adc/ad7192.c b/drivers/iio/adc/ad7192.c
> index adff6472e075..e59753c61274 100644
> --- a/drivers/iio/adc/ad7192.c
> +++ b/drivers/iio/adc/ad7192.c
> @@ -58,7 +58,8 @@
>  /* Mode Register Bit Designations (AD7192_REG_MODE) */
>  #define AD7192_MODE_SEL(x)	(((x) & 0x7) << 21) /* Operation Mode Select */
>  #define AD7192_MODE_SEL_MASK	(0x7 << 21) /* Operation Mode Select Mask */
> -#define AD7192_MODE_DAT_STA	BIT(20) /* Status Register transmission */
> +#define AD7192_MODE_STA(x)	(((x) & 0x1) << 20) /* Status Register transmission */
> +#define AD7192_MODE_STA_MASK	BIT(20) /* Status Register transmission Mask */
>  #define AD7192_MODE_CLKSRC(x)	(((x) & 0x3) << 18) /* Clock Source Select */
>  #define AD7192_MODE_SINC3	BIT(15) /* SINC3 Filter Select */
>  #define AD7192_MODE_ACX		BIT(14) /* AC excitation enable(AD7195 only)*/
> @@ -288,12 +289,25 @@ static int ad7192_set_mode(struct ad_sigma_delta *sd,
>  	return ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode);
>  }
>  
> +static int ad7192_append_status(struct ad_sigma_delta *sd, bool append)
> +{
> +	struct ad7192_state *st = ad_sigma_delta_to_ad7192(sd);
> +
> +	st->mode &= ~AD7192_MODE_STA_MASK;
> +	st->mode |= AD7192_MODE_STA(append);
> +
Another case where I would prefer the state cache be updated after the write
succeeds unless there is some reason that doesn't make sense.

+ Swash patch 8 into this one so we don't leave a broken driver inbetween.

Thanks,

Jonathan

> +	return ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode);
> +}
> +
>  static const struct ad_sigma_delta_info ad7192_sigma_delta_info = {
>  	.set_channel = ad7192_set_channel,
> +	.append_status = ad7192_append_status,
>  	.set_mode = ad7192_set_mode,
>  	.has_registers = true,
>  	.addr_shift = 3,
>  	.read_mask = BIT(6),
> +	.status_ch_mask = GENMASK(3, 0),
> +	.num_slots = 4,
>  	.irq_flags = IRQF_TRIGGER_FALLING,
>  };
>  


  reply	other threads:[~2022-03-19 16:04 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-03-18 16:27 [PATCH v2 0/8] iio: adc: ad_sigma_delta: Add sequencer support alexandru.tachici
2022-03-18 16:27 ` [PATCH v2 1/8] iio: adc: ad7124: Remove shift from scan_type alexandru.tachici
2022-03-19 15:38   ` Jonathan Cameron
2022-03-18 16:27 ` [PATCH v2 2/8] iio: adc: ad7124: Add update_scan_mode alexandru.tachici
2022-03-19 15:45   ` Jonathan Cameron
2022-03-18 16:27 ` [PATCH v2 3/8] iio: adc: ad7192: " alexandru.tachici
2022-03-18 16:27 ` [PATCH v2 4/8] iio: adc: ad_sigma_delta: Add sequencer support alexandru.tachici
2022-03-19 16:03   ` Jonathan Cameron
2022-03-18 16:27 ` [PATCH v2 5/8] iio: adc: ad7124: add " alexandru.tachici
2022-03-19 16:09   ` Jonathan Cameron
2022-03-18 16:27 ` [PATCH v2 6/8] iio: adc: ad7192: " alexandru.tachici
2022-03-19 16:11   ` Jonathan Cameron [this message]
2022-03-18 16:27 ` [PATCH v2 7/8] iio: adc: ad7124: add disable_all() callback alexandru.tachici
2022-03-19 16:10   ` Jonathan Cameron
2022-03-18 16:27 ` [PATCH v2 8/8] iio: adc: ad7192: " alexandru.tachici

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220319161135.5c7153e7@jic23-huawei \
    --to=jic23@kernel.org \
    --cc=alexandru.tachici@analog.com \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox