Re: [PATCH v5 1/3] dt-bindings: adc-joystick: add poll-interval-ms

Rob Herring
2022-06-29T02:10:22Z

On Tue, 28 Jun 2022 14:14:58 -0500, Chris Morgan wrote:
> New devicetree attribute of "poll-interval-ms".
>
> Add poll-interval support for the adc-joystick documentation. This is
> an optional value and if not provided the adc-joystick works as it
> does today (with triggered buffers). If this value is provided, the
> adc-joystick driver is polled at the specified interval. A new
> attribute was added instead of using the existing attribute of
> "poll-interval" to comply with rules detailed in property-units.yaml.
>
> Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com>
> Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
> ---
> Documentation/devicetree/bindings/input/adc-joystick.yaml | 6 ++++++
> 1 file changed, 6 insertions(+)
>

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/input/adc-joystick.yaml: properties:poll-interval-ms: '$ref' should not be valid under {'const': '$ref'}
hint: Standard unit suffix properties don't need a type $ref
from schema $id: http://devicetree.org/meta-schemas/core.yaml#
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml: patternProperties:^thermistor@:properties:adi,excitation-current-nanoamp: '$ref' should not be valid under {'const': '$ref'}
hint: Standard unit suffix properties don't need a type $ref
from schema $id: http://devicetree.org/meta-schemas/core.yaml#
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/input/adc-joystick.yaml: ignoring, error in schema: properties: poll-interval-ms
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml: ignoring, error in schema: patternProperties: ^thermistor@: properties: adi,excitation-current-nanoamp
Documentation/devicetree/bindings/input/adc-joystick.example.dtb:0:0: /example-0/adc-joystick: failed to match any schema with compatible: ['adc-joystick']
Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.example.dtb:0:0: /example-0/spi/ltc2983@0: failed to match any schema with compatible: ['adi,ltc2983']

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.