From: Mitja Spes <mitja@lxnav.com>
To: linux-iio@vger.kernel.org, Jonathan Cameron <jic23@kernel.org>
Cc: Mitja Spes <mitja@lxnav.com>,
Lars-Peter Clausen <lars@metafoo.de>,
Rob Herring <robh+dt@kernel.org>,
Andy Shevchenko <andy.shevchenko@gmail.com>,
Tomasz Duszynski <tduszyns@gmail.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 1/3] iio: pressure: ms5611: fixed value compensation bug
Date: Wed, 19 Oct 2022 14:52:50 +0200 [thread overview]
Message-ID: <20221019125254.952588-1-mitja@lxnav.com> (raw)
When using multiple instances of this driver the compensation PROM was
overwritten by the last initialized sensor. Now each sensor has own PROM
storage.
Signed-off-by: Mitja Spes <mitja@lxnav.com>
---
drivers/iio/pressure/ms5611.h | 12 +++----
drivers/iio/pressure/ms5611_core.c | 51 ++++++++++++++++--------------
2 files changed, 31 insertions(+), 32 deletions(-)
diff --git a/drivers/iio/pressure/ms5611.h b/drivers/iio/pressure/ms5611.h
index cbc9349c342a..550b75b7186f 100644
--- a/drivers/iio/pressure/ms5611.h
+++ b/drivers/iio/pressure/ms5611.h
@@ -25,13 +25,6 @@ enum {
MS5607,
};
-struct ms5611_chip_info {
- u16 prom[MS5611_PROM_WORDS_NB];
-
- int (*temp_and_pressure_compensate)(struct ms5611_chip_info *chip_info,
- s32 *temp, s32 *pressure);
-};
-
/*
* OverSampling Rate descriptor.
* Warning: cmd MUST be kept aligned on a word boundary (see
@@ -50,12 +43,15 @@ struct ms5611_state {
const struct ms5611_osr *pressure_osr;
const struct ms5611_osr *temp_osr;
+ u16 prom[MS5611_PROM_WORDS_NB];
+
int (*reset)(struct ms5611_state *st);
int (*read_prom_word)(struct ms5611_state *st, int index, u16 *word);
int (*read_adc_temp_and_pressure)(struct ms5611_state *st,
s32 *temp, s32 *pressure);
- struct ms5611_chip_info *chip_info;
+ int (*compensate_temp_and_pressure)(struct ms5611_state *st, s32 *temp,
+ s32 *pressure);
struct regulator *vdd;
};
diff --git a/drivers/iio/pressure/ms5611_core.c b/drivers/iio/pressure/ms5611_core.c
index 717521de66c4..c564a1d6cafe 100644
--- a/drivers/iio/pressure/ms5611_core.c
+++ b/drivers/iio/pressure/ms5611_core.c
@@ -85,7 +85,7 @@ static int ms5611_read_prom(struct iio_dev *indio_dev)
struct ms5611_state *st = iio_priv(indio_dev);
for (i = 0; i < MS5611_PROM_WORDS_NB; i++) {
- ret = st->read_prom_word(st, i, &st->chip_info->prom[i]);
+ ret = st->read_prom_word(st, i, &st->prom[i]);
if (ret < 0) {
dev_err(&indio_dev->dev,
"failed to read prom at %d\n", i);
@@ -93,7 +93,7 @@ static int ms5611_read_prom(struct iio_dev *indio_dev)
}
}
- if (!ms5611_prom_is_valid(st->chip_info->prom, MS5611_PROM_WORDS_NB)) {
+ if (!ms5611_prom_is_valid(st->prom, MS5611_PROM_WORDS_NB)) {
dev_err(&indio_dev->dev, "PROM integrity check failed\n");
return -ENODEV;
}
@@ -114,21 +114,20 @@ static int ms5611_read_temp_and_pressure(struct iio_dev *indio_dev,
return ret;
}
- return st->chip_info->temp_and_pressure_compensate(st->chip_info,
- temp, pressure);
+ return st->compensate_temp_and_pressure(st, temp, pressure);
}
-static int ms5611_temp_and_pressure_compensate(struct ms5611_chip_info *chip_info,
+static int ms5611_temp_and_pressure_compensate(struct ms5611_state *st,
s32 *temp, s32 *pressure)
{
s32 t = *temp, p = *pressure;
s64 off, sens, dt;
- dt = t - (chip_info->prom[5] << 8);
- off = ((s64)chip_info->prom[2] << 16) + ((chip_info->prom[4] * dt) >> 7);
- sens = ((s64)chip_info->prom[1] << 15) + ((chip_info->prom[3] * dt) >> 8);
+ dt = t - (st->prom[5] << 8);
+ off = ((s64)st->prom[2] << 16) + ((st->prom[4] * dt) >> 7);
+ sens = ((s64)st->prom[1] << 15) + ((st->prom[3] * dt) >> 8);
- t = 2000 + ((chip_info->prom[6] * dt) >> 23);
+ t = 2000 + ((st->prom[6] * dt) >> 23);
if (t < 2000) {
s64 off2, sens2, t2;
@@ -154,17 +153,17 @@ static int ms5611_temp_and_pressure_compensate(struct ms5611_chip_info *chip_inf
return 0;
}
-static int ms5607_temp_and_pressure_compensate(struct ms5611_chip_info *chip_info,
+static int ms5607_temp_and_pressure_compensate(struct ms5611_state *st,
s32 *temp, s32 *pressure)
{
s32 t = *temp, p = *pressure;
s64 off, sens, dt;
- dt = t - (chip_info->prom[5] << 8);
- off = ((s64)chip_info->prom[2] << 17) + ((chip_info->prom[4] * dt) >> 6);
- sens = ((s64)chip_info->prom[1] << 16) + ((chip_info->prom[3] * dt) >> 7);
+ dt = t - (st->prom[5] << 8);
+ off = ((s64)st->prom[2] << 17) + ((st->prom[4] * dt) >> 6);
+ sens = ((s64)st->prom[1] << 16) + ((st->prom[3] * dt) >> 7);
- t = 2000 + ((chip_info->prom[6] * dt) >> 23);
+ t = 2000 + ((st->prom[6] * dt) >> 23);
if (t < 2000) {
s64 off2, sens2, t2, tmp;
@@ -342,15 +341,6 @@ static int ms5611_write_raw(struct iio_dev *indio_dev,
static const unsigned long ms5611_scan_masks[] = {0x3, 0};
-static struct ms5611_chip_info chip_info_tbl[] = {
- [MS5611] = {
- .temp_and_pressure_compensate = ms5611_temp_and_pressure_compensate,
- },
- [MS5607] = {
- .temp_and_pressure_compensate = ms5607_temp_and_pressure_compensate,
- }
-};
-
static const struct iio_chan_spec ms5611_channels[] = {
{
.type = IIO_PRESSURE,
@@ -433,7 +423,20 @@ int ms5611_probe(struct iio_dev *indio_dev, struct device *dev,
struct ms5611_state *st = iio_priv(indio_dev);
mutex_init(&st->lock);
- st->chip_info = &chip_info_tbl[type];
+
+ switch (type) {
+ case MS5611:
+ st->compensate_temp_and_pressure =
+ ms5611_temp_and_pressure_compensate;
+ break;
+ case MS5607:
+ st->compensate_temp_and_pressure =
+ ms5607_temp_and_pressure_compensate;
+ break;
+ default:
+ return -EINVAL;
+ }
+
st->temp_osr =
&ms5611_avail_temp_osr[ARRAY_SIZE(ms5611_avail_temp_osr) - 1];
st->pressure_osr =
--
2.34.1
next reply other threads:[~2022-10-19 14:22 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-19 12:52 Mitja Spes [this message]
2022-10-19 12:52 ` [PATCH 2/3] iio: pressure: ms5611: changed hardcoded SPI speed to value limited Mitja Spes
2022-10-19 12:52 ` [PATCH 3/3] doc: iio: pressure: ms5611: added max SPI frequency setting to the example Mitja Spes
2022-10-19 13:23 ` Andy Shevchenko
2022-10-20 5:31 ` Mitja Špes
2022-10-19 15:49 ` Krzysztof Kozlowski
2022-10-20 5:40 ` Mitja Špes
2022-10-20 12:00 ` Krzysztof Kozlowski
2022-10-19 13:24 ` [PATCH 1/3] iio: pressure: ms5611: fixed value compensation bug Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221019125254.952588-1-mitja@lxnav.com \
--to=mitja@lxnav.com \
--cc=andy.shevchenko@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=jic23@kernel.org \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=tduszyns@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox