From: "Patrik Dahlström" <risca@dalakolonin.se>
To: linux-iio@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, letux-kernel@openphoenux.org,
kernel@pyra-handheld.com, pgoudagunta@nvidia.com,
hns@goldelico.com, jic23@kernel.org, lars@metafoo.de,
linux-omap@vger.kernel.org,
"Patrik Dahlström" <risca@dalakolonin.se>
Subject: [PATCH v3 1/7] iio: adc: palmas: remove adc_wakeupX_data
Date: Wed, 5 Apr 2023 23:22:27 +0200 [thread overview]
Message-ID: <20230405212233.4167986-2-risca@dalakolonin.se> (raw)
In-Reply-To: <20230405212233.4167986-1-risca@dalakolonin.se>
It does not seem to be used by anyone and later patches in this series
are made simpler by first removing this. There is now a lot of dead code
that cannot be reached, until later patches revive it. Arguably, this is
preferred over removing the code only to add it again.
Signed-off-by: Patrik Dahlström <risca@dalakolonin.se>
---
drivers/iio/adc/palmas_gpadc.c | 50 ++++------------------------------
include/linux/mfd/palmas.h | 8 ------
2 files changed, 6 insertions(+), 52 deletions(-)
diff --git a/drivers/iio/adc/palmas_gpadc.c b/drivers/iio/adc/palmas_gpadc.c
index 2921186458e0..03af6cd73ec8 100644
--- a/drivers/iio/adc/palmas_gpadc.c
+++ b/drivers/iio/adc/palmas_gpadc.c
@@ -76,6 +76,12 @@ static struct palmas_gpadc_info palmas_gpadc_info[] = {
PALMAS_ADC_INFO(IN15, 0, 0, 0, 0, INVALID, INVALID, true),
};
+struct palmas_adc_wakeup_property {
+ int adc_channel_number;
+ int adc_high_threshold;
+ int adc_low_threshold;
+};
+
/*
* struct palmas_gpadc - the palmas_gpadc structure
* @ch0_current: channel 0 current source setting
@@ -493,11 +499,6 @@ static int palmas_gpadc_get_adc_dt_data(struct platform_device *pdev,
return 0;
}
-static void palmas_disable_wakeup(void *dev)
-{
- device_wakeup_disable(dev);
-}
-
static int palmas_gpadc_probe(struct platform_device *pdev)
{
struct palmas_gpadc *adc;
@@ -548,36 +549,6 @@ static int palmas_gpadc_probe(struct platform_device *pdev)
return dev_err_probe(adc->dev, ret,
"request irq %d failed\n", adc->irq);
- if (gpadc_pdata->adc_wakeup1_data) {
- memcpy(&adc->wakeup1_data, gpadc_pdata->adc_wakeup1_data,
- sizeof(adc->wakeup1_data));
- adc->wakeup1_enable = true;
- adc->irq_auto_0 = platform_get_irq(pdev, 1);
- ret = devm_request_threaded_irq(&pdev->dev, adc->irq_auto_0,
- NULL, palmas_gpadc_irq_auto,
- IRQF_ONESHOT,
- "palmas-adc-auto-0", adc);
- if (ret < 0)
- return dev_err_probe(adc->dev, ret,
- "request auto0 irq %d failed\n",
- adc->irq_auto_0);
- }
-
- if (gpadc_pdata->adc_wakeup2_data) {
- memcpy(&adc->wakeup2_data, gpadc_pdata->adc_wakeup2_data,
- sizeof(adc->wakeup2_data));
- adc->wakeup2_enable = true;
- adc->irq_auto_1 = platform_get_irq(pdev, 2);
- ret = devm_request_threaded_irq(&pdev->dev, adc->irq_auto_1,
- NULL, palmas_gpadc_irq_auto,
- IRQF_ONESHOT,
- "palmas-adc-auto-1", adc);
- if (ret < 0)
- return dev_err_probe(adc->dev, ret,
- "request auto1 irq %d failed\n",
- adc->irq_auto_1);
- }
-
/* set the current source 0 (value 0/5/15/20 uA => 0..3) */
if (gpadc_pdata->ch0_current <= 1)
adc->ch0_current = PALMAS_ADC_CH0_CURRENT_SRC_0;
@@ -617,15 +588,6 @@ static int palmas_gpadc_probe(struct platform_device *pdev)
palmas_gpadc_calibrate(adc, i);
}
- if (adc->wakeup1_enable || adc->wakeup2_enable) {
- device_wakeup_enable(&pdev->dev);
- ret = devm_add_action_or_reset(&pdev->dev,
- palmas_disable_wakeup,
- &pdev->dev);
- if (ret)
- return ret;
- }
-
return 0;
}
diff --git a/include/linux/mfd/palmas.h b/include/linux/mfd/palmas.h
index 117d02708439..eda1ffd99c1a 100644
--- a/include/linux/mfd/palmas.h
+++ b/include/linux/mfd/palmas.h
@@ -128,12 +128,6 @@ struct palmas_pmic_driver_data {
struct regulator_config config);
};
-struct palmas_adc_wakeup_property {
- int adc_channel_number;
- int adc_high_threshold;
- int adc_low_threshold;
-};
-
struct palmas_gpadc_platform_data {
/* Channel 3 current source is only enabled during conversion */
int ch3_current; /* 0: off; 1: 10uA; 2: 400uA; 3: 800 uA */
@@ -152,8 +146,6 @@ struct palmas_gpadc_platform_data {
int start_polarity;
int auto_conversion_period_ms;
- struct palmas_adc_wakeup_property *adc_wakeup1_data;
- struct palmas_adc_wakeup_property *adc_wakeup2_data;
};
struct palmas_reg_init {
--
2.25.1
next prev parent reply other threads:[~2023-04-05 21:22 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-05 21:22 [PATCH v3 0/7] iio: adc: palmas_gpadc: add iio events Patrik Dahlström
2023-04-05 21:22 ` Patrik Dahlström [this message]
2023-04-05 21:22 ` [PATCH v3 2/7] iio: adc: palmas: replace "wakeup" with "event" Patrik Dahlström
2023-04-05 21:22 ` [PATCH v3 3/7] iio: adc: palmas: use iio_event_direction for threshold polarity Patrik Dahlström
2023-04-05 21:22 ` [PATCH v3 4/7] iio: adc: palmas: move eventX_enable into palmas_adc_event Patrik Dahlström
2023-04-05 21:22 ` [PATCH v3 5/7] iio: adc: palmas: always reset events on unload Patrik Dahlström
2023-04-05 21:22 ` [PATCH v3 6/7] iio: adc: palmas: add support for iio threshold events Patrik Dahlström
2023-04-07 17:19 ` Jonathan Cameron
2023-04-08 11:31 ` Patrik Dahlström
2023-04-05 21:22 ` [PATCH v3 7/7] iio: adc: palmas: don't alter event config on suspend/resume Patrik Dahlström
2023-04-07 17:22 ` Jonathan Cameron
2023-04-07 17:04 ` [PATCH v3 0/7] iio: adc: palmas_gpadc: add iio events Jonathan Cameron
2023-04-07 17:09 ` Jonathan Cameron
2023-04-08 10:51 ` Patrik Dahlström
-- strict thread matches above, loose matches on Subject: below --
2023-04-08 11:46 Patrik Dahlström
2023-04-08 11:46 ` [PATCH v3 1/7] iio: adc: palmas: remove adc_wakeupX_data Patrik Dahlström
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230405212233.4167986-2-risca@dalakolonin.se \
--to=risca@dalakolonin.se \
--cc=hns@goldelico.com \
--cc=jic23@kernel.org \
--cc=kernel@pyra-handheld.com \
--cc=lars@metafoo.de \
--cc=letux-kernel@openphoenux.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=pgoudagunta@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox