Linux IIO development
 help / color / mirror / Atom feed
From: Jonathan Cameron <jic23@kernel.org>
To: Lars-Peter Clausen <lars@metafoo.de>
Cc: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>,
	linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 4/4] iio: dac: mcp4922: add support for mcp48xx series chips
Date: Fri, 7 Apr 2023 18:35:04 +0100	[thread overview]
Message-ID: <20230407183504.54706458@jic23-huawei> (raw)
In-Reply-To: <9a203f56-c19a-48f2-f10c-ca0794ce79ed@metafoo.de>

On Wed, 5 Apr 2023 07:18:46 -0700
Lars-Peter Clausen <lars@metafoo.de> wrote:

> Hi,
> 
> Looks very good. A few small comments inline.
> [...]
> > @@ -50,6 +58,35 @@ struct mcp4922_state {
> >   	},						\
> >   }
> >   
> > +static bool mcp4922_needs_vref(int device_id)  
> 
> `enum mcp4922_supported_device_ids` instead of `int`. Same for num_channels() below.
> 
> > +{
> > +	switch (device_id) {
> > +	case ID_MCP4902:
> > +	case ID_MCP4912:
> > +	case ID_MCP4921:
> > +	case ID_MCP4922:
> > +		return true;
> > +	default:
> > +		return false;
> > +	}
> > +}
> > [...]
> >   static int mcp4922_spi_write(struct mcp4922_state *state, u8 addr, u32 val)
> >   {
> >   	state->mosi[1] = val & 0xff;
> > @@ -108,11 +145,17 @@ static int mcp4922_write_raw(struct iio_dev *indio_dev,
> >   	}
> >   }
> >   
> > -static const struct iio_chan_spec mcp4922_channels[4][MCP4922_NUM_CHANNELS] = {
> > +static const struct iio_chan_spec mcp4922_channels[10][MCP4922_NUM_CHANNELS] = {  
> 
> mcp4922_channels[][MCP4922_NUM_CHANNELS]
> 
> So it does not have to be changed again when adding additional devices 
> in the future.
> 
> > [...]
> > @@ -197,11 +244,14 @@ static void mcp4922_remove(struct spi_device *spi)
> >   {
> >   	struct iio_dev *indio_dev = spi_get_drvdata(spi);
> >   	struct mcp4922_state *state;
> > +	const struct spi_device_id *id = spi_get_device_id(spi);
> >   
> >   	iio_device_unregister(indio_dev);
> >   	state = iio_priv(indio_dev);
> >   	regulator_disable(state->vdd_reg);
> > -	regulator_disable(state->vref_reg);
> > +	if (mcp4922_needs_vref(id->driver_data)) {  
> Could be `if (state->vref_reg)`, this way you don't need to lookup the 
> spi_device_id. But either way is fine.

Even better would be to make this driver use devm_ for all unwinding.
That way the regulator_disable() callback registered via
devm_add_action_or_reset() will only be registered if you enabled such
a regulator in the first place.

The rest of this remove is trivial so it would be a nice addition to this
series to get rid of the need to have it at all.

> > +		regulator_disable(state->vref_reg);
> > +	}
> >   }
> >   
> > [...]  
> 
> 


  reply	other threads:[~2023-04-07 17:20 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-04-05 14:01 [PATCH 0/4] Add MCP48XX bindings and driver support Nicolas Frattaroli
2023-04-05 14:01 ` [PATCH 1/4] dt-bindings: iio: dac: mcp4922: add vdd-supply property Nicolas Frattaroli
2023-04-09 20:52   ` Michael Welling
2023-04-05 14:01 ` [PATCH 2/4] iio: dac: mcp4922: get and enable vdd regulator Nicolas Frattaroli
2023-04-05 14:21   ` Lars-Peter Clausen
2023-04-07 17:46     ` Jonathan Cameron
2023-04-07 17:44   ` Jonathan Cameron
2023-04-05 14:01 ` [PATCH 3/4] dt-bindings: iio: dac: add mcp4822 Nicolas Frattaroli
2023-04-05 14:10   ` Krzysztof Kozlowski
2023-04-05 14:17     ` Nicolas Frattaroli
2023-04-06 18:58       ` Krzysztof Kozlowski
2023-04-05 14:01 ` [PATCH 4/4] iio: dac: mcp4922: add support for mcp48xx series chips Nicolas Frattaroli
2023-04-05 14:18   ` Lars-Peter Clausen
2023-04-07 17:35     ` Jonathan Cameron [this message]
2023-04-07 17:40   ` Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230407183504.54706458@jic23-huawei \
    --to=jic23@kernel.org \
    --cc=frattaroli.nicolas@gmail.com \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox