From: Marius Hoch <mail@mariushoch.de>
To: Jonathan Cameron <jic23@kernel.org>,
Lars-Peter Clausen <lars@metafoo.de>,
linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Hans de Goede <hdegoede@redhat.com>, Marius Hoch <mail@mariushoch.de>
Subject: [PATCH v2 4/6] iio: st_sensors: Add ACPI support for lsm303d to the LSM9DS0 IMU driver
Date: Thu, 13 Apr 2023 04:40:11 +0200 [thread overview]
Message-ID: <20230413024013.450165-5-mail@mariushoch.de> (raw)
In-Reply-To: <20230413024013.450165-1-mail@mariushoch.de>
The lsm303d can be found as ACCL0001 on various Lenovo devices,
including the Lenovo Yoga Tablet 2 1051-F, where I tested this
patch.
Signed-off-by: Marius Hoch <mail@mariushoch.de>
---
drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_i2c.c | 10 ++++++++++
drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_spi.c | 10 ++++++++++
2 files changed, 20 insertions(+)
diff --git a/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_i2c.c b/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_i2c.c
index 64fa77d302e2..79be8d28d965 100644
--- a/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_i2c.c
+++ b/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_i2c.c
@@ -12,6 +12,7 @@
#include <linux/module.h>
#include <linux/mod_devicetable.h>
#include <linux/regmap.h>
+#include <linux/acpi.h>
#include <linux/iio/common/st_sensors_i2c.h>
@@ -37,6 +38,14 @@ static const struct i2c_device_id st_lsm9ds0_id_table[] = {
};
MODULE_DEVICE_TABLE(i2c, st_lsm9ds0_id_table);
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id st_lsm9ds0_acpi_match[] = {
+ {"ACCL0001", (kernel_ulong_t)LSM303D_IMU_DEV_NAME},
+ { },
+};
+MODULE_DEVICE_TABLE(acpi, st_lsm9ds0_acpi_match);
+#endif
+
static const struct regmap_config st_lsm9ds0_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
@@ -73,6 +82,7 @@ static struct i2c_driver st_lsm9ds0_driver = {
.driver = {
.name = "st-lsm9ds0-i2c",
.of_match_table = st_lsm9ds0_of_match,
+ .acpi_match_table = ACPI_PTR(st_lsm9ds0_acpi_match),
},
.probe_new = st_lsm9ds0_i2c_probe,
.id_table = st_lsm9ds0_id_table,
diff --git a/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_spi.c b/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_spi.c
index 997b5ff792be..27c5d99ce0e3 100644
--- a/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_spi.c
+++ b/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_spi.c
@@ -12,6 +12,7 @@
#include <linux/mod_devicetable.h>
#include <linux/regmap.h>
#include <linux/spi/spi.h>
+#include <linux/acpi.h>
#include <linux/iio/common/st_sensors_spi.h>
@@ -37,6 +38,14 @@ static const struct spi_device_id st_lsm9ds0_id_table[] = {
};
MODULE_DEVICE_TABLE(spi, st_lsm9ds0_id_table);
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id st_lsm9ds0_acpi_match[] = {
+ {"ACCL0001", (kernel_ulong_t)LSM303D_IMU_DEV_NAME},
+ { },
+};
+MODULE_DEVICE_TABLE(acpi, st_lsm9ds0_acpi_match);
+#endif
+
static const struct regmap_config st_lsm9ds0_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
@@ -72,6 +81,7 @@ static struct spi_driver st_lsm9ds0_driver = {
.driver = {
.name = "st-lsm9ds0-spi",
.of_match_table = st_lsm9ds0_of_match,
+ .acpi_match_table = ACPI_PTR(st_lsm9ds0_acpi_match),
},
.probe = st_lsm9ds0_spi_probe,
.id_table = st_lsm9ds0_id_table,
--
2.39.2
next prev parent reply other threads:[~2023-04-13 2:47 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-13 2:40 [PATCH v2 0/6] iio: st_sensors: Add lsm303d support Marius Hoch
2023-04-13 2:40 ` [PATCH v2 1/6] iio: accel: st_accel: Add LSM303D Marius Hoch
2023-04-13 2:40 ` [PATCH v2 2/6] iio: magnetometer: " Marius Hoch
2023-04-13 2:40 ` [PATCH v2 3/6] iio: st_sensors: Add lsm303d support to the LSM9DS0 IMU driver Marius Hoch
2023-04-13 2:40 ` Marius Hoch [this message]
2023-04-15 16:55 ` [PATCH v2 4/6] iio: st_sensors: Add ACPI support for lsm303d " Jonathan Cameron
2023-04-15 23:17 ` Marius Hoch
2023-04-13 2:40 ` [PATCH v2 5/6] iio: Comment that the LSM303D also has the Magnetometer DRDY Marius Hoch
2023-04-13 2:40 ` [PATCH v2 6/6] dt-bindings: iio: st-sensors: Add LSM303D accelerometer+magnetometer Marius Hoch
2023-04-13 8:07 ` Krzysztof Kozlowski
2023-04-15 16:51 ` Jonathan Cameron
2023-04-15 23:19 ` Marius Hoch
2023-04-16 7:14 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230413024013.450165-5-mail@mariushoch.de \
--to=mail@mariushoch.de \
--cc=hdegoede@redhat.com \
--cc=jic23@kernel.org \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox