Linux IIO development
 help / color / mirror / Atom feed
From: Marius Hoch <mail@mariushoch.de>
To: Jonathan Cameron <jic23@kernel.org>,
	Lars-Peter Clausen <lars@metafoo.de>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Denis Ciocca <denis.ciocca@st.com>,
	Linus Walleij <linus.walleij@linaro.org>,
	linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Cc: Hans de Goede <hdegoede@redhat.com>, Marius Hoch <mail@mariushoch.de>
Subject: [PATCH v3 4/6] iio: st_sensors: Add ACPI support for lsm303d to the LSM9DS0 IMU driver
Date: Sun, 16 Apr 2023 01:11:28 +0200	[thread overview]
Message-ID: <20230415231130.115094-5-mail@mariushoch.de> (raw)
In-Reply-To: <20230415231130.115094-1-mail@mariushoch.de>

The lsm303d can be found as ACCL0001 on various Lenovo devices,
including the Lenovo Yoga Tablet 2 1051-F, where I tested this
patch.

Signed-off-by: Marius Hoch <mail@mariushoch.de>
---
 drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_i2c.c | 7 +++++++
 drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_spi.c | 7 +++++++
 2 files changed, 14 insertions(+)

diff --git a/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_i2c.c b/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_i2c.c
index 64fa77d302e2..52f1ea6c457f 100644
--- a/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_i2c.c
+++ b/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_i2c.c
@@ -37,6 +37,12 @@ static const struct i2c_device_id st_lsm9ds0_id_table[] = {
 };
 MODULE_DEVICE_TABLE(i2c, st_lsm9ds0_id_table);
 
+static const struct acpi_device_id st_lsm9ds0_acpi_match[] = {
+	{"ACCL0001", (kernel_ulong_t)LSM303D_IMU_DEV_NAME},
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, st_lsm9ds0_acpi_match);
+
 static const struct regmap_config st_lsm9ds0_regmap_config = {
 	.reg_bits	= 8,
 	.val_bits	= 8,
@@ -73,6 +79,7 @@ static struct i2c_driver st_lsm9ds0_driver = {
 	.driver = {
 		.name = "st-lsm9ds0-i2c",
 		.of_match_table = st_lsm9ds0_of_match,
+		.acpi_match_table = st_lsm9ds0_acpi_match,
 	},
 	.probe_new = st_lsm9ds0_i2c_probe,
 	.id_table = st_lsm9ds0_id_table,
diff --git a/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_spi.c b/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_spi.c
index 997b5ff792be..55f3738193af 100644
--- a/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_spi.c
+++ b/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_spi.c
@@ -37,6 +37,12 @@ static const struct spi_device_id st_lsm9ds0_id_table[] = {
 };
 MODULE_DEVICE_TABLE(spi, st_lsm9ds0_id_table);
 
+static const struct acpi_device_id st_lsm9ds0_acpi_match[] = {
+	{"ACCL0001", (kernel_ulong_t)LSM303D_IMU_DEV_NAME},
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, st_lsm9ds0_acpi_match);
+
 static const struct regmap_config st_lsm9ds0_regmap_config = {
 	.reg_bits	= 8,
 	.val_bits	= 8,
@@ -72,6 +78,7 @@ static struct spi_driver st_lsm9ds0_driver = {
 	.driver = {
 		.name = "st-lsm9ds0-spi",
 		.of_match_table = st_lsm9ds0_of_match,
+		.acpi_match_table = st_lsm9ds0_acpi_match,
 	},
 	.probe = st_lsm9ds0_spi_probe,
 	.id_table = st_lsm9ds0_id_table,
-- 
2.39.2


  parent reply	other threads:[~2023-04-15 23:12 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-04-15 23:11 [PATCH v3 0/6] iio: st_sensors: Add lsm303d support Marius Hoch
2023-04-15 23:11 ` [PATCH v3 1/6] iio: accel: st_accel: Add LSM303D Marius Hoch
2023-04-21  8:41   ` Linus Walleij
2023-04-15 23:11 ` [PATCH v3 2/6] iio: magnetometer: " Marius Hoch
2023-04-21  8:41   ` Linus Walleij
2023-04-15 23:11 ` [PATCH v3 3/6] iio: st_sensors: Add lsm303d support to the LSM9DS0 IMU driver Marius Hoch
2023-04-21  8:42   ` Linus Walleij
2023-04-15 23:11 ` Marius Hoch [this message]
2023-04-21  8:43   ` [PATCH v3 4/6] iio: st_sensors: Add ACPI support for lsm303d " Linus Walleij
2023-05-02 14:51   ` Marius Hoch
2023-05-07 13:50     ` Jonathan Cameron
2023-04-15 23:11 ` [PATCH v3 5/6] iio: Comment that the LSM303D also has the Magnetometer DRDY Marius Hoch
2023-04-21  8:43   ` Linus Walleij
2023-04-15 23:11 ` [PATCH v3 6/6] dt-bindings: iio: st-sensors: Add LSM303D accelerometer+magnetometer Marius Hoch
2023-04-16  7:29   ` Krzysztof Kozlowski
2023-04-16 12:23     ` Jonathan Cameron
2023-04-16 20:19 ` [PATCH v3 0/6] iio: st_sensors: Add lsm303d support Hans de Goede
2023-04-20 17:21   ` Marius Hoch
2023-04-21  7:55   ` Hans de Goede

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230415231130.115094-5-mail@mariushoch.de \
    --to=mail@mariushoch.de \
    --cc=denis.ciocca@st.com \
    --cc=devicetree@vger.kernel.org \
    --cc=hdegoede@redhat.com \
    --cc=jic23@kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=lars@metafoo.de \
    --cc=linus.walleij@linaro.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox