From: Astrid Rost <astrid.rost@axis.com>
To: Jonathan Cameron <jic23@kernel.org>,
Lars-Peter Clausen <lars@metafoo.de>
Cc: linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org,
kernel@axis.com,
"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
"Mathieu Othacehe" <m.othacehe@gmail.com>,
"Astrid Rost" <astrid.rost@axis.com>
Subject: [PATCH v5 0/7] iio: light: vcnl4000: Add features for vncl4040/4200
Date: Tue, 30 May 2023 16:23:58 +0200 [thread overview]
Message-ID: <20230530142405.1679146-1-astrid.rost@axis.com> (raw)
Add a more complete support for vncl4040 and vcnl4200, which allows to
change the distance of proximity detection and interrupt support for the
illuminance sensor.
Proximity functionality:
- Interrupt support (new on vcnl4200).
Proximity reduce the amount of interrupts:
- Adaptable integration time (new on vcnl4200) - the sampling rate
changes according to this value.
- Period - interrupt is asserted if the value is above or
below a certain threshold.
Proximity change the activity distance:
- Oversampling ratio - Amount of LED pulses per measured raw value.
- Calibration bias - LED current calibration of the sensor.
Illuminance functionality:
- Interrupt support.
Illuminance reduce the amount of interrupts:
- Adaptable integration time - the sampling rate and scale changes
according to this value.
- Period – interrupt is asserted if the value is above or
below a certain threshold.
changes v2:
- [PATCH v2 3/7] Fixed calculation of al_scale.
Fix the value of vcnl4040 according to the data-sheet.
Use div_u64 for the division.
scription for the branch
changes v3:
- [PATCH v3 1-3/7] Add differences between the chips as variables in
chip-spec.
- [PATCH v3 4/7] Changed commit message.
- [PATCH v3 5/7] Use period instead of debounce time. This causes some
calculations as the period is a time and the chip allows to set a certain
amount of measurements above/below the threshold, before throwing an
interrupt.
- [PATCH v3 6/7] Changed commit message.
changes v4:
- [PATCH v3 1-3/7] Fix setting correct als_it for vcnl4040.
- [PATCH v3 5/7] Use MICRO macro.
Fix values greater than 1 s for the proximity period.
changes v5:
[PATCH v5 2/7]:
- Calculate ps_it from ps_it_times by usinh NSEC_PER_USEC.
[PATCH v5 3/7]:
- Calculate als_it from ps_it_times by using NSEC_PER_USEC.
- Store scale step factor in chip_spec.
- Fixes sampling_rate to ns + 20 %.
[PATCH v5 3/7 - 7/7]
- Changed formatting.
- Changed some variable names.
Astrid Rost (7):
[PATCH v4 1/7] iio: light: vcnl4000: Add proximity irq for vcnl4200
[PATCH v4 2/7] iio: light: vcnl4000: Add proximity ps_it for vcnl4200
[PATCH v4 3/7] iio: light: vcnl4000: Add als_it for vcnl4040/4200
[PATCH v4 4/7] iio: light: vcnl4000: add illuminance irq vcnl4040/4200
[PATCH v4 5/7] iio: light: vcnl4000: Add period for vcnl4040/4200
[PATCH v4 6/7] iio: light: vcnl4000: Add oversampling_ratio for 4040/4200
[PATCH v4 7/7] iio: light: vcnl4000: Add calibration bias for 4040/4200
drivers/iio/light/vcnl4000.c | 727 +++++++++++++++++++++++++++++++----
1 file changed, 657 insertions(+), 70 deletions(-)
--
2.30.2
next reply other threads:[~2023-05-30 14:26 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-30 14:23 Astrid Rost [this message]
2023-05-30 14:23 ` [PATCH v5 1/7] iio: light: vcnl4000: Add proximity irq for vcnl4200 Astrid Rost
2023-06-03 12:08 ` andy.shevchenko
2023-05-30 14:24 ` [PATCH v5 2/7] iio: light: vcnl4000: Add proximity ps_it " Astrid Rost
2023-06-03 12:09 ` andy.shevchenko
2023-05-30 14:24 ` [PATCH v5 3/7] iio: light: vcnl4000: Add als_it for vcnl4040/4200 Astrid Rost
2023-06-03 12:15 ` andy.shevchenko
2023-05-30 14:24 ` [PATCH v5 4/7] iio: light: vcnl4000: add illuminance irq vcnl4040/4200 Astrid Rost
2023-06-03 13:46 ` andy.shevchenko
2023-06-04 11:16 ` Jonathan Cameron
2023-05-30 14:24 ` [PATCH v5 5/7] iio: light: vcnl4000: Add period for vcnl4040/4200 Astrid Rost
2023-06-03 13:51 ` andy.shevchenko
2023-05-30 14:24 ` [PATCH v5 6/7] iio: light: vcnl4000: Add oversampling_ratio for 4040/4200 Astrid Rost
2023-06-03 13:51 ` andy.shevchenko
2023-05-30 14:24 ` [PATCH v5 7/7] iio: light: vcnl4000: Add calibration bias " Astrid Rost
2023-06-03 13:52 ` andy.shevchenko
2023-06-03 13:54 ` [PATCH v5 0/7] iio: light: vcnl4000: Add features for vncl4040/4200 andy.shevchenko
2023-06-04 11:20 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230530142405.1679146-1-astrid.rost@axis.com \
--to=astrid.rost@axis.com \
--cc=jic23@kernel.org \
--cc=kernel@axis.com \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=m.othacehe@gmail.com \
--cc=u.kleine-koenig@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox