From: Astrid Rost <astrid.rost@axis.com>
To: Jonathan Cameron <jic23@kernel.org>,
Lars-Peter Clausen <lars@metafoo.de>
Cc: linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org,
kernel@axis.com,
"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
"Mathieu Othacehe" <m.othacehe@gmail.com>,
"Astrid Rost" <astrid.rost@axis.com>
Subject: [PATCH v6 7/8] iio: light: vcnl4000: Add oversampling_ratio for 4040/4200
Date: Tue, 13 Jun 2023 15:50:23 +0200 [thread overview]
Message-ID: <20230613135025.2596641-8-astrid.rost@axis.com> (raw)
In-Reply-To: <20230613135025.2596641-1-astrid.rost@axis.com>
Add the proximity multi pulse (PS_MPS) as oversampling_ratio.
Instead of one single pulse per every defined time frame, one can
program2, 4, or even 8 pulses. This leads to a longer IRED on-time
for each proximity measurement value, which also results in a higher
detection range.
Add read/write attribute for proximity oversampling-ratio and read
attribute for available oversampling-ratio.
This is supported for vcnl4040 and vcnl4200.
Signed-off-by: Astrid Rost <astrid.rost@axis.com>
---
drivers/iio/light/vcnl4000.c | 83 +++++++++++++++++++++++++++++++++++-
1 file changed, 81 insertions(+), 2 deletions(-)
diff --git a/drivers/iio/light/vcnl4000.c b/drivers/iio/light/vcnl4000.c
index 435bf57eb4c8..ebe9b5343bb3 100644
--- a/drivers/iio/light/vcnl4000.c
+++ b/drivers/iio/light/vcnl4000.c
@@ -61,6 +61,7 @@
#define VCNL4200_AL_CONF 0x00 /* Ambient light configuration */
#define VCNL4200_PS_CONF1 0x03 /* Proximity configuration */
+#define VCNL4200_PS_CONF3 0x04 /* Proximity configuration */
#define VCNL4040_PS_THDL_LM 0x06 /* Proximity threshold low */
#define VCNL4040_PS_THDH_LM 0x07 /* Proximity threshold high */
#define VCNL4040_ALS_THDL_LM 0x02 /* Ambient light threshold low */
@@ -90,6 +91,7 @@
#define VCNL4040_PS_CONF2_PS_IT GENMASK(3, 1) /* Proximity integration time */
#define VCNL4040_CONF1_PS_PERS GENMASK(5, 4) /* Proximity interrupt persistence setting */
#define VCNL4040_PS_CONF2_PS_INT GENMASK(9, 8) /* Proximity interrupt mode */
+#define VCNL4040_PS_CONF3_MPS GENMASK(6, 5) /* Proximity multi pulse number */
#define VCNL4040_PS_IF_AWAY BIT(8) /* Proximity event cross low threshold */
#define VCNL4040_PS_IF_CLOSE BIT(9) /* Proximity event cross high threshold */
#define VCNL4040_ALS_RISING BIT(12) /* Ambient Light cross high threshold */
@@ -158,6 +160,7 @@ static const int vcnl4200_als_it_times[][2] = {
static const int vcnl4040_als_persistence[] = {1, 2, 4, 8};
static const int vcnl4040_ps_persistence[] = {1, 2, 3, 4};
+static const int vcnl4040_ps_oversampling_ratio[] = {1, 2, 4, 8};
#define VCNL4000_SLEEP_DELAY_MS 2000 /* before we enter pm_runtime_suspend */
@@ -770,6 +773,53 @@ static ssize_t vcnl4040_write_ps_period(struct vcnl4000_data *data, int val, int
return ret;
}
+static ssize_t vcnl4040_read_ps_oversampling_ratio(struct vcnl4000_data *data, int *val)
+{
+ int ret;
+
+ ret = i2c_smbus_read_word_data(data->client, VCNL4200_PS_CONF3);
+ if (ret < 0)
+ return ret;
+
+ ret = FIELD_GET(VCNL4040_PS_CONF3_MPS, ret);
+ if (ret >= ARRAY_SIZE(vcnl4040_ps_oversampling_ratio))
+ return -EINVAL;
+
+ *val = vcnl4040_ps_oversampling_ratio[ret];
+
+ return ret;
+}
+
+static ssize_t vcnl4040_write_ps_oversampling_ratio(struct vcnl4000_data *data, int val)
+{
+ unsigned int i;
+ int ret;
+ u16 regval;
+
+ for (i = 0; i < ARRAY_SIZE(vcnl4040_ps_oversampling_ratio); i++) {
+ if (val == vcnl4040_ps_oversampling_ratio[i])
+ break;
+ }
+
+ if (i >= ARRAY_SIZE(vcnl4040_ps_oversampling_ratio))
+ return -EINVAL;
+
+ mutex_lock(&data->vcnl4000_lock);
+
+ ret = i2c_smbus_read_word_data(data->client, VCNL4200_PS_CONF3);
+ if (ret < 0)
+ goto out_unlock;
+
+ regval = FIELD_PREP(VCNL4040_PS_CONF3_MPS, i);
+ regval |= (ret & ~VCNL4040_PS_CONF3_MPS);
+ ret = i2c_smbus_write_word_data(data->client, VCNL4200_PS_CONF3,
+ regval);
+
+out_unlock:
+ mutex_unlock(&data->vcnl4000_lock);
+ return ret;
+}
+
static int vcnl4000_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int *val, int *val2, long mask)
@@ -820,6 +870,16 @@ static int vcnl4000_read_raw(struct iio_dev *indio_dev,
if (ret < 0)
return ret;
return IIO_VAL_INT_PLUS_MICRO;
+ case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+ switch (chan->type) {
+ case IIO_PROXIMITY:
+ ret = vcnl4040_read_ps_oversampling_ratio(data, val);
+ if (ret < 0)
+ return ret;
+ return IIO_VAL_INT;
+ default:
+ return -EINVAL;
+ }
default:
return -EINVAL;
}
@@ -843,6 +903,13 @@ static int vcnl4040_write_raw(struct iio_dev *indio_dev,
default:
return -EINVAL;
}
+ case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+ switch (chan->type) {
+ case IIO_PROXIMITY:
+ return vcnl4040_write_ps_oversampling_ratio(data, val);
+ default:
+ return -EINVAL;
+ }
default:
return -EINVAL;
}
@@ -871,6 +938,16 @@ static int vcnl4040_read_avail(struct iio_dev *indio_dev,
}
*type = IIO_VAL_INT_PLUS_MICRO;
return IIO_AVAIL_LIST;
+ case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+ switch (chan->type) {
+ case IIO_PROXIMITY:
+ *vals = (int *)vcnl4040_ps_oversampling_ratio;
+ *length = ARRAY_SIZE(vcnl4040_ps_oversampling_ratio);
+ *type = IIO_VAL_INT;
+ return IIO_AVAIL_LIST;
+ default:
+ return -EINVAL;
+ }
default:
return -EINVAL;
}
@@ -1643,8 +1720,10 @@ static const struct iio_chan_spec vcnl4040_channels[] = {
}, {
.type = IIO_PROXIMITY,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
- BIT(IIO_CHAN_INFO_INT_TIME),
- .info_mask_separate_available = BIT(IIO_CHAN_INFO_INT_TIME),
+ BIT(IIO_CHAN_INFO_INT_TIME) |
+ BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
+ .info_mask_separate_available = BIT(IIO_CHAN_INFO_INT_TIME) |
+ BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
.ext_info = vcnl4000_ext_info,
.event_spec = vcnl4040_event_spec,
.num_event_specs = ARRAY_SIZE(vcnl4040_event_spec),
--
2.30.2
next prev parent reply other threads:[~2023-06-13 13:50 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-13 13:50 [PATCH v6 0/8] iio: light: vcnl4000: Add features for vncl4040/4200 Astrid Rost
2023-06-13 13:50 ` [PATCH v6 1/8] iio: light: vcnl4000: Add proximity irq for vcnl4200 Astrid Rost
2023-06-13 13:50 ` [PATCH v6 2/8] iio: light: vcnl4000: Add proximity ps_it " Astrid Rost
2023-06-13 13:50 ` [PATCH v6 3/8] iio: light: vcnl4000: Check type with switch case Astrid Rost
2023-06-13 13:50 ` [PATCH v6 4/8] iio: light: vcnl4000: Add als_it for vcnl4040/4200 Astrid Rost
2023-06-13 13:50 ` [PATCH v6 5/8] iio: light: vcnl4000: add illuminance irq vcnl4040/4200 Astrid Rost
2023-06-13 13:50 ` [PATCH v6 6/8] iio: light: vcnl4000: Add period for vcnl4040/4200 Astrid Rost
2023-06-13 13:50 ` Astrid Rost [this message]
2023-06-13 13:50 ` [PATCH v6 8/8] iio: light: vcnl4000: Add calibration bias for 4040/4200 Astrid Rost
2023-06-17 20:05 ` [PATCH v6 0/8] iio: light: vcnl4000: Add features for vncl4040/4200 Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230613135025.2596641-8-astrid.rost@axis.com \
--to=astrid.rost@axis.com \
--cc=jic23@kernel.org \
--cc=kernel@axis.com \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=m.othacehe@gmail.com \
--cc=u.kleine-koenig@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox