From: George Stark <gnstark@sberdevices.ru>
To: <jic23@kernel.org>, <lars@metafoo.de>,
<neil.armstrong@linaro.org>, <khilman@baylibre.com>,
<jbrunet@baylibre.com>, <martin.blumenstingl@googlemail.com>,
<andriy.shevchenko@linux.intel.com>, <nuno.sa@analog.com>,
<gnstark@sberdevices.ru>
Cc: <linux-iio@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>,
<linux-amlogic@lists.infradead.org>, <kernel@sberdevices.ru>,
George Stark <GNStark@sberdevices.ru>
Subject: [PATCH v3 5/5] meson saradc: support reading from channel 7 mux inputs
Date: Wed, 28 Jun 2023 01:37:18 +0300 [thread overview]
Message-ID: <20230627224017.1724097-6-gnstark@sberdevices.ru> (raw)
In-Reply-To: <20230627224017.1724097-1-gnstark@sberdevices.ru>
Add iio channel for every channel 7 mux input.
Meson saradc channel 7 is connected to a mux that can switch channel
input to well-known sources like Vdd, GND and several Vdd dividers.
Signed-off-by: George Stark <GNStark@sberdevices.ru>
---
drivers/iio/adc/meson_saradc.c | 83 ++++++++++++++++++++++++++++++++--
1 file changed, 79 insertions(+), 4 deletions(-)
diff --git a/drivers/iio/adc/meson_saradc.c b/drivers/iio/adc/meson_saradc.c
index 4a9dacedb6c3..c99a55944ece 100644
--- a/drivers/iio/adc/meson_saradc.c
+++ b/drivers/iio/adc/meson_saradc.c
@@ -163,6 +163,7 @@
#define MESON_SAR_ADC_MAX_FIFO_SIZE 32
#define MESON_SAR_ADC_TIMEOUT 100 /* ms */
#define MESON_SAR_ADC_VOLTAGE_AND_TEMP_CHANNEL 6
+#define MESON_SAR_ADC_VOLTAGE_AND_MUX_CHANNEL 7
#define MESON_SAR_ADC_TEMP_OFFSET 27
/* temperature sensor calibration information in eFuse */
@@ -202,6 +203,19 @@
.datasheet_name = "TEMP_SENSOR", \
}
+#define MESON_SAR_ADC_MUX(_chan, _sel) { \
+ .type = IIO_VOLTAGE, \
+ .channel = _chan, \
+ .indexed = 1, \
+ .address = MESON_SAR_ADC_VOLTAGE_AND_MUX_CHANNEL, \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
+ BIT(IIO_CHAN_INFO_AVERAGE_RAW), \
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
+ .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_CALIBBIAS) | \
+ BIT(IIO_CHAN_INFO_CALIBSCALE), \
+ .datasheet_name = "SAR_ADC_MUX_"#_sel, \
+}
+
enum meson_sar_adc_avg_mode {
NO_AVERAGING = 0x0,
MEAN_AVERAGING = 0x1,
@@ -235,6 +249,27 @@ enum meson_sar_adc_channel_index {
NUM_CHAN_7,
NUM_CHAN_TEMP,
NUM_CHAN_SOFT_TIMESTAMP,
+ NUM_MUX_0_VSS,
+ NUM_MUX_1_VDD_DIV4,
+ NUM_MUX_2_VDD_DIV2,
+ NUM_MUX_3_VDD_MUL3_DIV4,
+ NUM_MUX_4_VDD,
+};
+
+static enum meson_sar_adc_chan7_mux_sel chan7_mux_values[] = {
+ CHAN7_MUX_VSS,
+ CHAN7_MUX_VDD_DIV4,
+ CHAN7_MUX_VDD_DIV2,
+ CHAN7_MUX_VDD_MUL3_DIV4,
+ CHAN7_MUX_VDD,
+};
+
+static const char * const chan7_mux_names[] = {
+ "gnd",
+ "0.25vdd",
+ "0.5vdd",
+ "0.75vdd",
+ "vdd",
};
static const struct iio_chan_spec meson_sar_adc_iio_channels[] = {
@@ -247,6 +282,11 @@ static const struct iio_chan_spec meson_sar_adc_iio_channels[] = {
MESON_SAR_ADC_CHAN(NUM_CHAN_6),
MESON_SAR_ADC_CHAN(NUM_CHAN_7),
IIO_CHAN_SOFT_TIMESTAMP(NUM_CHAN_SOFT_TIMESTAMP),
+ MESON_SAR_ADC_MUX(NUM_MUX_0_VSS, 0),
+ MESON_SAR_ADC_MUX(NUM_MUX_1_VDD_DIV4, 1),
+ MESON_SAR_ADC_MUX(NUM_MUX_2_VDD_DIV2, 2),
+ MESON_SAR_ADC_MUX(NUM_MUX_3_VDD_MUL3_DIV4, 3),
+ MESON_SAR_ADC_MUX(NUM_MUX_4_VDD, 4),
};
static const struct iio_chan_spec meson_sar_adc_and_temp_iio_channels[] = {
@@ -260,6 +300,11 @@ static const struct iio_chan_spec meson_sar_adc_and_temp_iio_channels[] = {
MESON_SAR_ADC_CHAN(NUM_CHAN_7),
MESON_SAR_ADC_TEMP_CHAN(NUM_CHAN_TEMP),
IIO_CHAN_SOFT_TIMESTAMP(NUM_CHAN_SOFT_TIMESTAMP),
+ MESON_SAR_ADC_MUX(NUM_MUX_0_VSS, 0),
+ MESON_SAR_ADC_MUX(NUM_MUX_1_VDD_DIV4, 1),
+ MESON_SAR_ADC_MUX(NUM_MUX_2_VDD_DIV2, 2),
+ MESON_SAR_ADC_MUX(NUM_MUX_3_VDD_MUL3_DIV4, 3),
+ MESON_SAR_ADC_MUX(NUM_MUX_4_VDD, 4),
};
struct meson_sar_adc_param {
@@ -298,6 +343,7 @@ struct meson_sar_adc_priv {
bool temperature_sensor_calibrated;
u8 temperature_sensor_coefficient;
u16 temperature_sensor_adc_val;
+ enum meson_sar_adc_chan7_mux_sel chan7_mux_sel;
};
static const struct regmap_config meson_sar_adc_regmap_config_gxbb = {
@@ -314,6 +360,17 @@ static const struct regmap_config meson_sar_adc_regmap_config_meson8 = {
.max_register = MESON_SAR_ADC_DELTA_10,
};
+static const struct iio_chan_spec *
+find_channel_by_num(struct iio_dev *indio_dev, int num)
+{
+ int i;
+
+ for (i = 0; i < indio_dev->num_channels; i++)
+ if (indio_dev->channels[i].channel == num)
+ return &indio_dev->channels[i];
+ return NULL;
+}
+
static unsigned int meson_sar_adc_get_fifo_count(struct iio_dev *indio_dev)
{
struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
@@ -362,6 +419,8 @@ static void meson_sar_adc_set_chan7_mux(struct iio_dev *indio_dev,
MESON_SAR_ADC_REG3_CTRL_CHAN7_MUX_SEL_MASK, regval);
usleep_range(10, 20);
+
+ priv->chan7_mux_sel = sel;
}
static int meson_sar_adc_read_raw_sample(struct iio_dev *indio_dev,
@@ -457,6 +516,15 @@ static void meson_sar_adc_enable_channel(struct iio_dev *indio_dev,
regmap_update_bits(priv->regmap,
MESON_SAR_ADC_DELTA_10,
MESON_SAR_ADC_DELTA_10_TEMP_SEL, regval);
+ } else if (chan->address == MESON_SAR_ADC_VOLTAGE_AND_MUX_CHANNEL) {
+ enum meson_sar_adc_chan7_mux_sel sel;
+
+ if (chan->channel == NUM_CHAN_7)
+ sel = CHAN7_MUX_CH7_INPUT;
+ else
+ sel = chan7_mux_values[chan->channel - NUM_MUX_0_VSS];
+ if (sel != priv->chan7_mux_sel)
+ meson_sar_adc_set_chan7_mux(indio_dev, sel);
}
}
@@ -1029,7 +1097,8 @@ static int meson_sar_adc_calib(struct iio_dev *indio_dev)
meson_sar_adc_set_chan7_mux(indio_dev, CHAN7_MUX_VDD_DIV4);
usleep_range(10, 20);
ret = meson_sar_adc_get_sample(indio_dev,
- &indio_dev->channels[7],
+ find_channel_by_num(indio_dev,
+ NUM_MUX_1_VDD_DIV4),
MEAN_AVERAGING, EIGHT_SAMPLES, &value0);
if (ret < 0)
goto out;
@@ -1037,7 +1106,8 @@ static int meson_sar_adc_calib(struct iio_dev *indio_dev)
meson_sar_adc_set_chan7_mux(indio_dev, CHAN7_MUX_VDD_MUL3_DIV4);
usleep_range(10, 20);
ret = meson_sar_adc_get_sample(indio_dev,
- &indio_dev->channels[7],
+ find_channel_by_num(indio_dev,
+ NUM_MUX_3_VDD_MUL3_DIV4),
MEAN_AVERAGING, EIGHT_SAMPLES, &value1);
if (ret < 0)
goto out;
@@ -1064,8 +1134,13 @@ static int read_label(struct iio_dev *indio_dev,
{
if (chan->type == IIO_TEMP)
return sprintf(label, "%s\n", "temp-sensor");
- if (chan->type == IIO_VOLTAGE)
- return sprintf(label, "channel-%d\n", chan->channel);
+ if (chan->type == IIO_VOLTAGE) {
+ if (chan->channel <= NUM_CHAN_7)
+ return sprintf(label, "channel-%d\n", chan->channel);
+ if (chan->channel >= NUM_MUX_0_VSS)
+ return sprintf(label, "%s\n",
+ chan7_mux_names[chan->channel - NUM_MUX_0_VSS]);
+ }
return 0;
}
--
2.38.4
next prev parent reply other threads:[~2023-06-27 22:59 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-27 22:37 [PATCH v3 0/5] meson saradc: add iio channels to read channel 7 mux inputs George Stark
2023-06-27 22:37 ` [PATCH v3 1/5] meson saradc: move enums declaration before variables declaration George Stark
2023-07-02 9:14 ` Jonathan Cameron
2023-07-04 0:39 ` George Stark
2023-06-27 22:37 ` [PATCH v3 2/5] meson saradc: move meson_sar_adc_set_chan7_mux routine upper George Stark
2023-06-27 22:37 ` [PATCH v3 3/5] meson saradc: add enum for iio channel numbers George Stark
2023-06-27 22:37 ` [PATCH v3 4/5] meson saradc: add channel labels George Stark
2023-07-02 9:16 ` Jonathan Cameron
2023-07-04 1:32 ` George Stark
2023-06-27 22:37 ` George Stark [this message]
2023-06-28 10:06 ` [PATCH v3 5/5] meson saradc: support reading from channel 7 mux inputs Andy Shevchenko
2023-07-02 9:21 ` Jonathan Cameron
2023-07-03 19:39 ` Martin Blumenstingl
2023-07-04 8:08 ` George Stark
[not found] ` <6ee38b3a-8e2f-15d6-f7bd-06ef567d2b68@sberdevices.ru>
2023-07-05 8:04 ` Jonathan Cameron
2023-07-02 9:11 ` [PATCH v3 0/5] meson saradc: add iio channels to read " Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230627224017.1724097-6-gnstark@sberdevices.ru \
--to=gnstark@sberdevices.ru \
--cc=andriy.shevchenko@linux.intel.com \
--cc=jbrunet@baylibre.com \
--cc=jic23@kernel.org \
--cc=kernel@sberdevices.ru \
--cc=khilman@baylibre.com \
--cc=lars@metafoo.de \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=martin.blumenstingl@googlemail.com \
--cc=neil.armstrong@linaro.org \
--cc=nuno.sa@analog.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox