Linux IIO development
 help / color / mirror / Atom feed
From: Antoniu Miclaus <antoniu.miclaus@analog.com>
To: <jic23@kernel.org>, <linux-iio@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>
Cc: Antoniu Miclaus <antoniu.miclaus@analog.com>
Subject: [PATCH v2 1/2] drivers: iio: filter: admv8818: add bypass mode
Date: Mon, 31 Jul 2023 11:49:26 +0300	[thread overview]
Message-ID: <20230731084928.8302-1-antoniu.miclaus@analog.com> (raw)

Add filter bypass mode, which bypasses the low pass filter, high pass
filter and disables/unregister the clock rate notifier.

Currently a feature like bypassing the filter is not achievable
straightforward and not very deductive. The user has to look through the
code and call the set_lpf_3db_frequency and set_hpf_3db_frequency iio
attributes from the user interface using the corner cases (freq >
largest lpf supported by the part, respectively freq < smallest hpf
supported by the part). Moreover, in such case of bypassing the filter,
the input clock rate change might mess up things so we want to make sure
that it is disabled. Also, the feature will help emphasizing the filter
behavior, therefore adding it in the userspace will ease the
charcaterization of the filter's effects when active/disabled.

It was requested by users of the driver to ease the interaction with
different configuration modes of the device.

Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
---
changes in v2:
 - improve code readability when setting the filter modes
 - add more explanations regarding the necessity of this feature in the commit
   body.
 drivers/iio/filter/admv8818.c | 65 ++++++++++++++++++++++++++++++-----
 1 file changed, 56 insertions(+), 9 deletions(-)

diff --git a/drivers/iio/filter/admv8818.c b/drivers/iio/filter/admv8818.c
index fe8d46cb7f1d..848baa6e3bbf 100644
--- a/drivers/iio/filter/admv8818.c
+++ b/drivers/iio/filter/admv8818.c
@@ -78,6 +78,7 @@ enum {
 enum {
 	ADMV8818_AUTO_MODE,
 	ADMV8818_MANUAL_MODE,
+	ADMV8818_BYPASS_MODE,
 };
 
 struct admv8818_state {
@@ -114,7 +115,8 @@ static const struct regmap_config admv8818_regmap_config = {
 
 static const char * const admv8818_modes[] = {
 	[0] = "auto",
-	[1] = "manual"
+	[1] = "manual",
+	[2] = "bypass"
 };
 
 static int __admv8818_hpf_select(struct admv8818_state *st, u64 freq)
@@ -394,6 +396,36 @@ static int admv8818_reg_access(struct iio_dev *indio_dev,
 		return regmap_write(st->regmap, reg, write_val);
 }
 
+static int admv8818_filter_bypass(struct admv8818_state *st)
+{
+	int ret;
+
+	mutex_lock(&st->lock);
+
+	ret = regmap_update_bits(st->regmap, ADMV8818_REG_WR0_SW,
+				 ADMV8818_SW_IN_SET_WR0_MSK |
+				 ADMV8818_SW_IN_WR0_MSK |
+				 ADMV8818_SW_OUT_SET_WR0_MSK |
+				 ADMV8818_SW_OUT_WR0_MSK,
+				 FIELD_PREP(ADMV8818_SW_IN_SET_WR0_MSK, 1) |
+				 FIELD_PREP(ADMV8818_SW_IN_WR0_MSK, 0) |
+				 FIELD_PREP(ADMV8818_SW_OUT_SET_WR0_MSK, 1) |
+				 FIELD_PREP(ADMV8818_SW_OUT_WR0_MSK, 0));
+	if (ret)
+		goto exit;
+
+	ret = regmap_update_bits(st->regmap, ADMV8818_REG_WR0_FILTER,
+				 ADMV8818_HPF_WR0_MSK |
+				 ADMV8818_LPF_WR0_MSK,
+				 FIELD_PREP(ADMV8818_HPF_WR0_MSK, 0) |
+				 FIELD_PREP(ADMV8818_LPF_WR0_MSK, 0));
+
+exit:
+	mutex_unlock(&st->lock);
+
+	return ret;
+}
+
 static int admv8818_get_mode(struct iio_dev *indio_dev,
 			     const struct iio_chan_spec *chan)
 {
@@ -411,14 +443,22 @@ static int admv8818_set_mode(struct iio_dev *indio_dev,
 
 	if (!st->clkin) {
 		if (mode == ADMV8818_MANUAL_MODE)
-			return 0;
+			goto set_mode;
+
+		if (mode == ADMV8818_BYPASS_MODE) {
+			ret = admv8818_filter_bypass(st);
+			if (ret)
+				return ret;
+
+			goto set_mode;
+		}
 
 		return -EINVAL;
 	}
 
 	switch (mode) {
 	case ADMV8818_AUTO_MODE:
-		if (!st->filter_mode)
+		if (st->filter_mode == ADMV8818_AUTO_MODE)
 			return 0;
 
 		ret = clk_prepare_enable(st->clkin);
@@ -434,20 +474,27 @@ static int admv8818_set_mode(struct iio_dev *indio_dev,
 
 		break;
 	case ADMV8818_MANUAL_MODE:
-		if (st->filter_mode)
-			return 0;
+	case ADMV8818_BYPASS_MODE:
+		if (st->filter_mode == ADMV8818_AUTO_MODE) {
+			clk_disable_unprepare(st->clkin);
 
-		clk_disable_unprepare(st->clkin);
+			ret = clk_notifier_unregister(st->clkin, &st->nb);
+			if (ret)
+				return ret;
+		}
 
-		ret = clk_notifier_unregister(st->clkin, &st->nb);
-		if (ret)
-			return ret;
+		if (mode == ADMV8818_BYPASS_MODE) {
+			ret = admv8818_filter_bypass(st);
+			if (ret)
+				return ret;
+		}
 
 		break;
 	default:
 		return -EINVAL;
 	}
 
+set_mode:
 	st->filter_mode = mode;
 
 	return ret;
-- 
2.41.0


             reply	other threads:[~2023-07-31  8:53 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-07-31  8:49 Antoniu Miclaus [this message]
2023-07-31  8:49 ` [PATCH v2 2/2] Documentation: ABI: testing: admv8818: add bypass Antoniu Miclaus
2023-08-05 18:52 ` [PATCH v2 1/2] drivers: iio: filter: admv8818: add bypass mode Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230731084928.8302-1-antoniu.miclaus@analog.com \
    --to=antoniu.miclaus@analog.com \
    --cc=jic23@kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox