Linux IIO development
 help / color / mirror / Atom feed
From: Jonathan Cameron <Jonathan.Cameron@Huawei.com>
To: "Nuno Sá" <noname.nuno@gmail.com>
Cc: David Lechner <dlechner@baylibre.com>,
	Jonathan Cameron <jic23@kernel.org>, <linux-iio@vger.kernel.org>,
	Peter Zijlstra <peterz@infradead.org>,
	Cosmin Tanislav <demonsingur@gmail.com>,
	"Jagath Jog J" <jagathjog1996@gmail.com>,
	Gwendal Grignou <gwendal@chromium.org>,
	"Daniel Campello" <campello@chromium.org>,
	<gregkh@linuxfoundation.org>
Subject: Re: [RFC PATCH 1/8] iio: locking: introduce __cleanup() based direct mode claiming infrastructure
Date: Tue, 24 Oct 2023 13:23:12 +0100	[thread overview]
Message-ID: <20231024132312.0000614c@Huawei.com> (raw)
In-Reply-To: <25cb785485ae585923b7b81276e10d8c048ba850.camel@gmail.com>

On Mon, 23 Oct 2023 16:58:48 +0200
Nuno Sá <noname.nuno@gmail.com> wrote:

> On Mon, 2023-10-23 at 15:34 +0100, Jonathan Cameron wrote:
> > On Mon, 23 Oct 2023 13:51:04 +0200
> > Nuno Sá <noname.nuno@gmail.com> wrote:
> >   
> > > On Mon, 2023-10-23 at 10:53 +0100, Jonathan Cameron wrote:  
> > > > On Mon, 23 Oct 2023 10:55:56 +0200
> > > > Nuno Sá <noname.nuno@gmail.com> wrote:
> > > >     
> > > > > On Sun, 2023-10-22 at 16:10 -0500, David Lechner wrote:    
> > > > > > On Sun, Oct 22, 2023 at 10:47 AM Jonathan Cameron <jic23@kernel.org>
> > > > > > wrote:      
> > > > > > > 
> > > > > > > From: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> > > > > > > 
> > > > > > > Allows use of:
> > > > > > > 
> > > > > > >         CLASS(iio_claim_direct, claimed_dev)(indio_dev);
> > > > > > >         if (IS_ERR(claimed_dev))
> > > > > > >                 return PTR_ERR(claimed_dev);
> > > > > > > 
> > > > > > >         st = iio_priv(claimed_dev);
> > > > > > > 
> > > > > > > to automatically call iio_device_release_direct_mode() based on
> > > > > > > scope.
> > > > > > > Typically seen in combination with local device specific locks which
> > > > > > > are already have automated cleanup options via guard(mutex)(&st-  
> > > > > > > >lock)  
> > > > > > > and scoped_guard().  Using both together allows most error handling
> > > > > > > to
> > > > > > > be automated.
> > > > > > > 
> > > > > > > Note that whilst this pattern results in a struct iio_dev
> > > > > > > *claimed_dev
> > > > > > > that can be used, it is not necessary to do so as long as that
> > > > > > > pointer
> > > > > > > has been checked for errors as in the example.
> > > > > > > 
> > > > > > > Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> > > > > > > ---
> > > > > > >  drivers/iio/industrialio-core.c |  4 ++++
> > > > > > >  include/linux/iio/iio.h         | 25 +++++++++++++++++++++++++
> > > > > > >  2 files changed, 29 insertions(+)
> > > > > > > 
> > > > > > > diff --git a/drivers/iio/industrialio-core.c
> > > > > > > b/drivers/iio/industrialio-
> > > > > > > core.c
> > > > > > > index c77745b594bd..93bfad105eb5 100644
> > > > > > > --- a/drivers/iio/industrialio-core.c
> > > > > > > +++ b/drivers/iio/industrialio-core.c
> > > > > > > @@ -2065,6 +2065,10 @@
> > > > > > > EXPORT_SYMBOL_GPL(iio_device_claim_direct_mode);
> > > > > > >   */
> > > > > > >  void iio_device_release_direct_mode(struct iio_dev *indio_dev)
> > > > > > >  {
> > > > > > > +       /* Auto cleanup can result in this being called with an
> > > > > > > ERR_PTR
> > > > > > > */
> > > > > > > +       if (IS_ERR(indio_dev))
> > > > > > > +               return;
> > > > > > > +
> > > > > > >         mutex_unlock(&to_iio_dev_opaque(indio_dev)->mlock);
> > > > > > >  }
> > > > > > >  EXPORT_SYMBOL_GPL(iio_device_release_direct_mode);
> > > > > > > diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h
> > > > > > > index d0ce3b71106a..11c42170fda1 100644
> > > > > > > --- a/include/linux/iio/iio.h
> > > > > > > +++ b/include/linux/iio/iio.h
> > > > > > > @@ -9,6 +9,7 @@
> > > > > > > 
> > > > > > >  #include <linux/device.h>
> > > > > > >  #include <linux/cdev.h>
> > > > > > > +#include <linux/cleanup.h>
> > > > > > >  #include <linux/slab.h>
> > > > > > >  #include <linux/iio/types.h>
> > > > > > >  /* IIO TODO LIST */
> > > > > > > @@ -644,6 +645,30 @@ int __devm_iio_device_register(struct device
> > > > > > > *dev,
> > > > > > > struct iio_dev *indio_dev,
> > > > > > >  int iio_push_event(struct iio_dev *indio_dev, u64 ev_code, s64
> > > > > > > timestamp);
> > > > > > >  int iio_device_claim_direct_mode(struct iio_dev *indio_dev);
> > > > > > >  void iio_device_release_direct_mode(struct iio_dev *indio_dev);
> > > > > > > +/*
> > > > > > > + * Auto cleanup version of iio_device_claim_direct_mode,
> > > > > > > + *
> > > > > > > + *     CLASS(iio_claim_direct, claimed_dev)(indio_dev);
> > > > > > > + *     if (IS_ERR(claimed_dev))
> > > > > > > + *             return PTR_ERR(claimed_dev);
> > > > > > > + *
> > > > > > > + *     st = iio_priv(claimed_dev);
> > > > > > > + *     ....
> > > > > > > + */
> > > > > > > +DEFINE_CLASS(iio_claim_direct, struct iio_dev *,
> > > > > > > +            iio_device_release_direct_mode(_T),
> > > > > > > +            ({
> > > > > > > +                       struct iio_dev *dev;
> > > > > > > +                       int d = iio_device_claim_direct_mode(_T);
> > > > > > > +
> > > > > > > +                       if (d < 0)
> > > > > > > +                               dev = ERR_PTR(d);
> > > > > > > +                       else
> > > > > > > +                               dev = _T;
> > > > > > > +                       dev;
> > > > > > > +            }),
> > > > > > > +            struct iio_dev *_T);
> > > > > > > +
> > > > > > >  int iio_device_claim_buffer_mode(struct iio_dev *indio_dev);
> > > > > > >  void iio_device_release_buffer_mode(struct iio_dev *indio_dev);
> > > > > > > 
> > > > > > > --
> > > > > > > 2.42.0
> > > > > > >       
> > > > > > 
> > > > > > What is the benefit of exposing `claimed_dev` rather than just the int
> > > > > > return value? It seems like it just makes more noise in the error
> > > > > > check.
> > > > > >       
> > > > > 
> > > > > I don't really have a very strong opinion on this but what I really
> > > > > don't
> > > > > like
> > > > > much is the pattern:
> > > > > 
> > > > > CLASS(type, ret), where the return value is an argument of the macro...
> > > > > It
> > > > > would
> > > > > be nice if we could just make it like:
> > > > > 
> > > > > ret = guard(type)(...); //or any other variation of the guard() macro
> > > > > if (ret) 
> > > > > 	return ret;
> > > > > 
> > > > > the above could also be an error pointer or even have one variation of
> > > > > each.
> > > > > but
> > > > > yeah, that likely means changing the cleanup.h file and that might be
> > > > > out of
> > > > > scope for Jonathan's patch series. 
> > > > >     
> > > > 
> > > > I fully agree it's ugly and a little unintuitive but I don't see a way an
> > > > "lvalue"
> > > > can work work cleanly (due to magic types under the hood) and I suspect we
> > > > will
> > > > have to get used to this pattern.
> > > >     
> > > 
> > > Yeah, given the games being played with the constructor and the _lock
> > > definition
> > > so we return the variable we want to "release" I agree it would be hard to
> > > have
> > > anything clean and likely even harder to read (more than it is already :)).
> > > 
> > > However, I think users of the cleanup.h stuff could build on top of it...
> > > For
> > > instance, in our case we could have something like:
> > > 
> > > #define IIO_CLAIM_DIRECT(dev) 
> > > 	int __ret = 0;
> > > 	CLASS(iio_claim_direct, claimed_dev)(dev);
> > > 	if ((IS_ERR(claimed_dev))
> > > 		__ret = PTR_ERR(claimed_dev);
> > > 	__ret  
> > 
> > Maybe, but we'll have to deal with people perpetually trying to brackets
> > around
> > the complex macro... 
> > 
> >   
> 
> Not sure what you mean here... you mean dealing with people coming up with funny
> new macros around CLASS(). In IIO, this is very specific and If I'm not missing
> anything the obvious, the above macro with give the same usage as 
> iio_device_claim_direct_mode() but without caring about release() - so not sure
> people could be that creative :)
Checkpatch will warn something along the lines of complex macros should be contained
in brackets / or do while()

So the class would go out of scope and be freed at the end of the macro :)

> 
> Anyways, as I started to say in my first reply, I don't feel strong about this
> at all, so feel free to add:
> 
> Reviewed-by: Nuno Sa <nuno.sa@analog.com>

Thanks,

I'm not going to rush with this set anyway given merge window about to open
However I do have a few long flights coming up so might use it in a lot more
drivers for v2.

Jonathan


> 
> 
> 


  reply	other threads:[~2023-10-24 12:23 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-10-22 15:47 [RFC PATCH 0/8] IIO: Use the new cleanup.h magic Jonathan Cameron
2023-10-22 15:47 ` [RFC PATCH 1/8] iio: locking: introduce __cleanup() based direct mode claiming infrastructure Jonathan Cameron
2023-10-22 21:10   ` David Lechner
2023-10-23  8:55     ` Nuno Sá
2023-10-23  9:53       ` Jonathan Cameron
2023-10-23 11:51         ` Nuno Sá
2023-10-23 14:34           ` Jonathan Cameron
2023-10-23 14:58             ` Nuno Sá
2023-10-24 12:23               ` Jonathan Cameron [this message]
2023-10-25  7:24                 ` Nuno Sá
2023-10-24 15:11       ` Peter Zijlstra
2023-10-24 15:28         ` Peter Zijlstra
2023-10-28 16:59           ` Jonathan Cameron
2023-11-02 10:48             ` Peter Zijlstra
2023-11-03 15:19               ` Jonathan Cameron
2023-10-23  9:49     ` Jonathan Cameron
2023-10-22 15:47 ` [RFC PATCH 2/8] iio: dummy: Add use of new automated cleanup of locks and direct mode claiming Jonathan Cameron
2023-10-22 15:47 ` [RFC PATCH 3/8] iio: accel: adxl367: Use automated cleanup for locks and iio direct mode Jonathan Cameron
2023-10-22 15:47 ` [RFC PATCH 4/8] iio: imu: bmi323: Use cleanup handling for iio_device_claim_direct_mode() Jonathan Cameron
2023-10-22 15:47 ` [RFC PATCH 5/8] iio: adc: max1363: Use automatic cleanup for locks and iio mode claiming Jonathan Cameron
2023-10-22 15:47 ` [RFC PATCH 6/8] iio: proximity: sx9360: Use automated cleanup for locks and IIO " Jonathan Cameron
2023-10-22 15:47 ` [RFC PATCH 7/8] iio: proximity: sx9324: " Jonathan Cameron
2023-10-22 15:47 ` [RFC PATCH 8/8] iio: proximity: sx9310: " Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231024132312.0000614c@Huawei.com \
    --to=jonathan.cameron@huawei.com \
    --cc=campello@chromium.org \
    --cc=demonsingur@gmail.com \
    --cc=dlechner@baylibre.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=gwendal@chromium.org \
    --cc=jagathjog1996@gmail.com \
    --cc=jic23@kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=noname.nuno@gmail.com \
    --cc=peterz@infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox