From: kernel test robot <lkp@intel.com>
To: Petre Rodan <petre.rodan@subdimension.ro>,
linux-kernel@vger.kernel.org, linux-iio@vger.kernel.org
Cc: oe-kbuild-all@lists.linux.dev,
Jonathan Cameron <jic23@kernel.org>,
Lars-Peter Clausen <lars@metafoo.de>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
Angel Iglesias <ang.iglesiasg@gmail.com>,
Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>,
Matti Vaittinen <mazziesaccount@gmail.com>,
Andreas Klinger <ak@it-klinger.de>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzk@kernel.org>
Subject: Re: [PATCH v2 2/2] iio: pressure: driver for Honeywell HSC/SSC series pressure sensors
Date: Sat, 18 Nov 2023 13:21:16 +0800 [thread overview]
Message-ID: <202311181316.z2BmTZmP-lkp@intel.com> (raw)
In-Reply-To: <20231117164232.8474-2-petre.rodan@subdimension.ro>
Hi Petre,
kernel test robot noticed the following build errors:
[auto build test ERROR on jic23-iio/togreg]
[also build test ERROR on robh/for-next linus/master v6.7-rc1]
[cannot apply to next-20231117]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Petre-Rodan/iio-pressure-driver-for-Honeywell-HSC-SSC-series-pressure-sensors/20231118-072654
base: https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git togreg
patch link: https://lore.kernel.org/r/20231117164232.8474-2-petre.rodan%40subdimension.ro
patch subject: [PATCH v2 2/2] iio: pressure: driver for Honeywell HSC/SSC series pressure sensors
config: riscv-rv32_defconfig (attached as .config)
compiler: riscv32-linux-gcc (GCC) 13.2.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20231118/202311181316.z2BmTZmP-lkp@intel.com/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202311181316.z2BmTZmP-lkp@intel.com/
All errors (new ones prefixed by >>):
>> drivers/iio/pressure/Kconfig:120: syntax error
drivers/iio/pressure/Kconfig:119:warning: ignoring unsupported character '.'
drivers/iio/pressure/Kconfig:119: unknown statement "pressure"
drivers/iio/pressure/Kconfig:121:warning: ignoring unsupported character ','
drivers/iio/pressure/Kconfig:121:warning: ignoring unsupported character ':'
drivers/iio/pressure/Kconfig:121: unknown statement "To"
drivers/iio/pressure/Kconfig:122:warning: ignoring unsupported character '.'
drivers/iio/pressure/Kconfig:122: unknown statement "called"
make[3]: *** [scripts/kconfig/Makefile:77: oldconfig] Error 1
make[2]: *** [Makefile:685: oldconfig] Error 2
make[1]: *** [Makefile:234: __sub-make] Error 2
make[1]: Target 'oldconfig' not remade because of errors.
make: *** [Makefile:234: __sub-make] Error 2
make: Target 'oldconfig' not remade because of errors.
--
>> drivers/iio/pressure/Kconfig:120: syntax error
drivers/iio/pressure/Kconfig:119:warning: ignoring unsupported character '.'
drivers/iio/pressure/Kconfig:119: unknown statement "pressure"
drivers/iio/pressure/Kconfig:121:warning: ignoring unsupported character ','
drivers/iio/pressure/Kconfig:121:warning: ignoring unsupported character ':'
drivers/iio/pressure/Kconfig:121: unknown statement "To"
drivers/iio/pressure/Kconfig:122:warning: ignoring unsupported character '.'
drivers/iio/pressure/Kconfig:122: unknown statement "called"
make[3]: *** [scripts/kconfig/Makefile:77: olddefconfig] Error 1
make[2]: *** [Makefile:685: olddefconfig] Error 2
make[1]: *** [Makefile:234: __sub-make] Error 2
make[1]: Target 'olddefconfig' not remade because of errors.
make: *** [Makefile:234: __sub-make] Error 2
make: Target 'olddefconfig' not remade because of errors.
--
>> drivers/iio/pressure/Kconfig:120: syntax error
drivers/iio/pressure/Kconfig:119:warning: ignoring unsupported character '.'
drivers/iio/pressure/Kconfig:119: unknown statement "pressure"
drivers/iio/pressure/Kconfig:121:warning: ignoring unsupported character ','
drivers/iio/pressure/Kconfig:121:warning: ignoring unsupported character ':'
drivers/iio/pressure/Kconfig:121: unknown statement "To"
drivers/iio/pressure/Kconfig:122:warning: ignoring unsupported character '.'
drivers/iio/pressure/Kconfig:122: unknown statement "called"
make[5]: *** [scripts/kconfig/Makefile:87: defconfig] Error 1
make[4]: *** [Makefile:685: defconfig] Error 2
make[3]: *** [Makefile:350: __build_one_by_one] Error 2
make[3]: Target 'defconfig' not remade because of errors.
make[3]: Target '32-bit.config' not remade because of errors.
make[2]: *** [arch/riscv/Makefile:190: rv32_defconfig] Error 2
make[1]: *** [Makefile:234: __sub-make] Error 2
make[1]: Target 'rv32_defconfig' not remade because of errors.
make: *** [Makefile:234: __sub-make] Error 2
make: Target 'rv32_defconfig' not remade because of errors.
vim +120 drivers/iio/pressure/Kconfig
8
9 config ABP060MG
10 tristate "Honeywell ABP pressure sensor driver"
11 depends on I2C
12 help
13 Say yes here to build support for the Honeywell ABP pressure
14 sensors.
15
16 To compile this driver as a module, choose M here: the module
17 will be called abp060mg.
18
19 config ROHM_BM1390
20 tristate "ROHM BM1390GLV-Z pressure sensor driver"
21 depends on I2C
22 help
23 Support for the ROHM BM1390 pressure sensor. The BM1390GLV-Z
24 can measure pressures ranging from 300 hPa to 1300 hPa with
25 configurable measurement averaging and internal FIFO. The
26 sensor does also provide temperature measurements.
27
28 config BMP280
29 tristate "Bosch Sensortec BMP180/BMP280/BMP380/BMP580 pressure sensor driver"
30 depends on (I2C || SPI_MASTER)
31 select REGMAP
32 select BMP280_I2C if (I2C)
33 select BMP280_SPI if (SPI_MASTER)
34 help
35 Say yes here to build support for Bosch Sensortec BMP180, BMP280, BMP380
36 and BMP580 pressure and temperature sensors. Also supports the BME280 with
37 an additional humidity sensor channel.
38
39 To compile this driver as a module, choose M here: the core module
40 will be called bmp280 and you will also get bmp280-i2c for I2C
41 and/or bmp280-spi for SPI support.
42
43 config BMP280_I2C
44 tristate
45 depends on BMP280
46 depends on I2C
47 select REGMAP_I2C
48
49 config BMP280_SPI
50 tristate
51 depends on BMP280
52 depends on SPI_MASTER
53 select REGMAP
54
55 config IIO_CROS_EC_BARO
56 tristate "ChromeOS EC Barometer Sensor"
57 depends on IIO_CROS_EC_SENSORS_CORE
58 help
59 Say yes here to build support for the Barometer sensor when
60 presented by the ChromeOS EC Sensor hub.
61
62 To compile this driver as a module, choose M here: the module
63 will be called cros_ec_baro.
64
65 config DLHL60D
66 tristate "All Sensors DLHL60D and DLHL60G low voltage digital pressure sensors"
67 depends on I2C
68 select IIO_BUFFER
69 select IIO_TRIGGERED_BUFFER
70 help
71 Say yes here to build support for the All Sensors DLH series
72 pressure sensors driver.
73
74 To compile this driver as a module, choose M here: the module
75 will be called dlhl60d.
76
77 config DPS310
78 tristate "Infineon DPS310 pressure and temperature sensor"
79 depends on I2C
80 select REGMAP_I2C
81 help
82 Support for the Infineon DPS310 digital barometric pressure sensor.
83 It can be accessed over I2C bus.
84
85 This driver can also be built as a module. If so, the module will be
86 called dps310.
87
88 config HID_SENSOR_PRESS
89 depends on HID_SENSOR_HUB
90 select IIO_BUFFER
91 select HID_SENSOR_IIO_COMMON
92 select HID_SENSOR_IIO_TRIGGER
93 tristate "HID PRESS"
94 help
95 Say yes here to build support for the HID SENSOR
96 Pressure driver
97
98 To compile this driver as a module, choose M here: the module
99 will be called hid-sensor-press.
100
101 config HP03
102 tristate "Hope RF HP03 temperature and pressure sensor driver"
103 depends on I2C
104 select REGMAP_I2C
105 help
106 Say yes here to build support for Hope RF HP03 pressure and
107 temperature sensor.
108
109 To compile this driver as a module, choose M here: the module
110 will be called hp03.
111
112 config HSC030PA
113 tristate "Honeywell HSC/SSC (TruStability pressure sensors series)"
114 depends on (I2C || SPI_MASTER)
115 select HSC030PA_I2C if (I2C)
116 select HSC030PA_SPI if (SPI_MASTER)
117 help
118 Say Y here to build support for the Honeywell HSC and SSC TruStability
119 pressure and temperature sensor series.
> 120
121 To compile this driver as a module, choose M here: the module will be
122 called hsc030pa.
123
--
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
next prev parent reply other threads:[~2023-11-18 5:21 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-17 16:42 [PATCH 1/2] dt-bindings: iio: pressure: add honeywell,hsc030 Petre Rodan
2023-11-17 16:42 ` [PATCH 2/2] iio: pressure: driver for Honeywell HSC/SSC series pressure sensors Petre Rodan
2023-11-18 5:21 ` kernel test robot [this message]
2023-11-20 12:35 ` Andy Shevchenko
2023-11-22 6:08 ` Petre Rodan
2023-11-22 10:45 ` Andy Shevchenko
2023-11-25 19:15 ` Jonathan Cameron
2023-11-25 19:13 ` Jonathan Cameron
2023-11-17 17:12 ` [PATCH 1/2] dt-bindings: iio: pressure: add honeywell,hsc030 Rob Herring
2023-11-17 19:22 ` [PATCH v2 " Petre Rodan
2023-11-17 20:13 ` Rob Herring
2023-11-19 13:49 ` Rob Herring
2023-11-19 20:14 ` Petre Rodan
2023-11-20 10:15 ` Krzysztof Kozlowski
2023-11-20 17:19 ` Rob Herring
2023-11-20 18:09 ` Petre Rodan
2023-11-20 10:21 ` Krzysztof Kozlowski
2023-11-20 13:42 ` Petre Rodan
2023-11-20 14:04 ` Krzysztof Kozlowski
2023-11-20 14:40 ` Petre Rodan
2023-11-20 17:39 ` Jonathan Cameron
2023-11-20 18:25 ` Petre Rodan
2023-11-25 19:21 ` Jonathan Cameron
2023-11-25 19:19 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=202311181316.z2BmTZmP-lkp@intel.com \
--to=lkp@intel.com \
--cc=ak@it-klinger.de \
--cc=andriy.shevchenko@linux.intel.com \
--cc=ang.iglesiasg@gmail.com \
--cc=jic23@kernel.org \
--cc=krzk@kernel.org \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=matti.vaittinen@fi.rohmeurope.com \
--cc=mazziesaccount@gmail.com \
--cc=oe-kbuild-all@lists.linux.dev \
--cc=petre.rodan@subdimension.ro \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox