[PULL] 1st set of IIO fixes for 6.7

[PULL] 1st set of IIO fixes for 6.7

[Jonathan Cameron]

The following changes since commit b85ea95d086471afb4ad062012a4d73cd328fa86:

  Linux 6.7-rc1 (2023-11-12 16:19:07 -0800)

are available in the Git repository at:

  https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-fixes-for-6.7a

for you to fetch changes up to 408d4b33c2440600418a1eb9c89eaa27cf5867ad:

  iio: adc: MCP3564: fix hardware identification logic (2023-12-04 13:54:10 +0000)

----------------------------------------------------------------
First set of IIO fixes for the 6.7 cycle.

Usual mixed bunch of driver bugs.  The core bug probably isn't hit
with upstream drivers, but good to get fix in place anyway.

iio-core
- Fix potential freeing of wrong iio buffer when multiple buffers used.
adi,adis16475
- Add missing spi_device_id table need for module auto-loading
- Fix untended BIT(BIT()) due to wrong macro definitions.
amlogic,meson
- Add a chip specific config for AXG soc familly which needs
  a vref_select to work.
freescale,mp6050
- Fix eating of error code on failure to read from sensor.
kionixq,kx022a
- Fix scaling to comply with ABI (m/s^2 rather than micro m/s^2)
measspec,ms_sensors
- Fix wrong conversion times due to strange value mapping.
microchip,mcp3564
- Fix previously impossible to fail check on limits.
- Fix identification logic.
nxp,imx93
- Add missing channels for i.mx95.
ti,am335x
- Fix handling of error for tiadc_request_dma().
ti,tmag5273
- Fix incorrect temperature offset.

----------------------------------------------------------------
David Lechner (1):
      iio: triggered-buffer: prevent possible freeing of wrong buffer

George Stark (1):
      iio: adc: meson: add separate config for axg SoC family

Haibo Chen (1):
      iio: adc: imx93: add four channels for imx93 adc

Javier Carrasco (3):
      iio: common: ms_sensors: ms_sensors_i2c: fix humidity conversion time table
      iio: tmag5273: fix temperature offset
      iio: adc: MCP3564: fix calib_bias and calib_scale range checks

Marius Cristea (1):
      iio: adc: MCP3564: fix hardware identification logic

Matti Vaittinen (1):
      iio: kx022a: Fix acceleration value scaling

Nuno Sa (2):
      iio: imu: adis16475: add spi_device_id table
      iio: imu: adis16475: use bit numbers in assign_bit()

Su Hui (1):
      iio: imu: inv_mpu6050: fix an error code problem in inv_mpu6050_read_raw

Wadim Egorov (1):
      iio: adc: ti_am335x_adc: Fix return value check of tiadc_request_dma()

 drivers/iio/accel/kionix-kx022a.c                  |  37 +++++--
 drivers/iio/adc/imx93_adc.c                        |   4 +
 drivers/iio/adc/mcp3564.c                          |   8 +-
 drivers/iio/adc/meson_saradc.c                     |  16 ++-
 drivers/iio/adc/ti_am335x_adc.c                    |   4 +-
 drivers/iio/buffer/industrialio-triggered-buffer.c |  10 ++
 drivers/iio/common/ms_sensors/ms_sensors_i2c.c     |   4 +-
 drivers/iio/imu/adis16475.c                        | 121 +++++++++++++--------
 drivers/iio/imu/inv_mpu6050/inv_mpu_core.c         |   4 +-
 drivers/iio/magnetometer/tmag5273.c                |   2 +-
 10 files changed, 141 insertions(+), 69 deletions(-)

Re: [PULL] 1st set of IIO fixes for 6.7

[Greg KH]

On Mon, Dec 11, 2023 at 07:35:16PM +0000, Jonathan Cameron wrote:
> The following changes since commit b85ea95d086471afb4ad062012a4d73cd328fa86:
> 
>   Linux 6.7-rc1 (2023-11-12 16:19:07 -0800)
> 
> are available in the Git repository at:
> 
>   https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-fixes-for-6.7a

Pulled and pushed out, thanks.

greg k-h