From: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
To: jikos@kernel.org, jic23@kernel.org, lars@metafoo.de,
Basavaraj.Natikar@amd.com
Cc: linux-input@vger.kernel.org, linux-iio@vger.kernel.org,
linux-kernel@vger.kernel.org,
Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Subject: [PATCH v3 1/4] iio: hid-sensor-als: Assign channels dynamically
Date: Tue, 9 Jan 2024 10:00:04 -0800 [thread overview]
Message-ID: <20240109180007.3373784-2-srinivas.pandruvada@linux.intel.com> (raw)
In-Reply-To: <20240109180007.3373784-1-srinivas.pandruvada@linux.intel.com>
Instead of assuming that every channel defined statically by
als_channels[] is present, assign dynamically based on presence of the
respective usage id in the descriptor. This will allow to register ALS
with limited channel support. Append the timestamp as the last channel.
When not all usage ids are present, the scan index is adjusted to
exclude unsupported channels.
There is no intentional function changes done.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
---
v3:
Addressed comments from Jonthan:
- Remove channel allocation and move to iio_priv()
- Parse all usage IDs in a single loop and continue
for failure. This way the temperature and chromaticity
will not need any special processing to parse usage ids.
- Don't leave empty channel indexes
v2:
New change
drivers/iio/light/hid-sensor-als.c | 56 +++++++++++++++++++++---------
1 file changed, 39 insertions(+), 17 deletions(-)
diff --git a/drivers/iio/light/hid-sensor-als.c b/drivers/iio/light/hid-sensor-als.c
index 5cd27f04b45e..72a7c01c97f8 100644
--- a/drivers/iio/light/hid-sensor-als.c
+++ b/drivers/iio/light/hid-sensor-als.c
@@ -25,17 +25,26 @@ struct als_state {
struct hid_sensor_hub_callbacks callbacks;
struct hid_sensor_common common_attributes;
struct hid_sensor_hub_attribute_info als[CHANNEL_SCAN_INDEX_MAX];
+ struct iio_chan_spec channels[CHANNEL_SCAN_INDEX_MAX + 1];
struct {
u32 illum[CHANNEL_SCAN_INDEX_MAX];
+ u32 scan_index[CHANNEL_SCAN_INDEX_MAX];
u64 timestamp __aligned(8);
} scan;
int scale_pre_decml;
int scale_post_decml;
int scale_precision;
int value_offset;
+ int num_channels;
s64 timestamp;
};
+/* The order of usage ids must match scan index starting from CHANNEL_SCAN_INDEX_INTENSITY */
+static const u32 als_usage_ids[] = {
+ HID_USAGE_SENSOR_LIGHT_ILLUM,
+ HID_USAGE_SENSOR_LIGHT_ILLUM,
+};
+
static const u32 als_sensitivity_addresses[] = {
HID_USAGE_SENSOR_DATA_LIGHT,
HID_USAGE_SENSOR_LIGHT_ILLUM,
@@ -216,11 +225,14 @@ static int als_capture_sample(struct hid_sensor_hub_device *hsdev,
struct als_state *als_state = iio_priv(indio_dev);
int ret = -EINVAL;
u32 sample_data = *(u32 *)raw_data;
+ int scan_index;
switch (usage_id) {
case HID_USAGE_SENSOR_LIGHT_ILLUM:
- als_state->scan.illum[CHANNEL_SCAN_INDEX_INTENSITY] = sample_data;
- als_state->scan.illum[CHANNEL_SCAN_INDEX_ILLUM] = sample_data;
+ scan_index = als_state->scan.scan_index[CHANNEL_SCAN_INDEX_INTENSITY];
+ als_state->scan.illum[scan_index] = sample_data;
+ scan_index = als_state->scan.scan_index[CHANNEL_SCAN_INDEX_ILLUM];
+ als_state->scan.illum[scan_index] = sample_data;
ret = 0;
break;
case HID_USAGE_SENSOR_TIME_TIMESTAMP:
@@ -237,27 +249,39 @@ static int als_capture_sample(struct hid_sensor_hub_device *hsdev,
/* Parse report which is specific to an usage id*/
static int als_parse_report(struct platform_device *pdev,
struct hid_sensor_hub_device *hsdev,
- struct iio_chan_spec *channels,
unsigned usage_id,
struct als_state *st)
{
- int ret;
+ struct iio_chan_spec *channels;
+ int ret, index = 0;
int i;
+ channels = st->channels;
+
for (i = 0; i <= CHANNEL_SCAN_INDEX_ILLUM; ++i) {
ret = sensor_hub_input_get_attribute_info(hsdev,
HID_INPUT_REPORT,
usage_id,
- HID_USAGE_SENSOR_LIGHT_ILLUM,
+ als_usage_ids[i],
&st->als[i]);
if (ret < 0)
- return ret;
- als_adjust_channel_bit_mask(channels, i, st->als[i].size);
+ continue;
+
+ channels[index] = als_channels[i];
+ st->scan.scan_index[i] = index;
+
+ als_adjust_channel_bit_mask(channels, index, st->als[i].size);
+ ++index;
dev_dbg(&pdev->dev, "als %x:%x\n", st->als[i].index,
st->als[i].report_id);
}
+ st->num_channels = index;
+ /* Return success even if one usage id is present */
+ if (index)
+ ret = 0;
+
st->scale_precision = hid_sensor_format_scale(usage_id,
&st->als[CHANNEL_SCAN_INDEX_INTENSITY],
&st->scale_pre_decml, &st->scale_post_decml);
@@ -293,15 +317,7 @@ static int hid_als_probe(struct platform_device *pdev)
return ret;
}
- indio_dev->channels = devm_kmemdup(&pdev->dev, als_channels,
- sizeof(als_channels), GFP_KERNEL);
- if (!indio_dev->channels) {
- dev_err(&pdev->dev, "failed to duplicate channels\n");
- return -ENOMEM;
- }
-
ret = als_parse_report(pdev, hsdev,
- (struct iio_chan_spec *)indio_dev->channels,
hsdev->usage,
als_state);
if (ret) {
@@ -309,8 +325,14 @@ static int hid_als_probe(struct platform_device *pdev)
return ret;
}
- indio_dev->num_channels =
- ARRAY_SIZE(als_channels);
+ /* Add timestamp channel */
+ als_state->channels[als_state->num_channels] = als_channels[CHANNEL_SCAN_INDEX_TIMESTAMP];
+ als_state->channels[als_state->num_channels].scan_index = als_state->num_channels;
+
+ /* +1 for adding timestamp channel */
+ indio_dev->num_channels = als_state->num_channels + 1;
+
+ indio_dev->channels = als_state->channels;
indio_dev->info = &als_info;
indio_dev->name = name;
indio_dev->modes = INDIO_DIRECT_MODE;
--
2.43.0
next prev parent reply other threads:[~2024-01-09 18:00 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-09 18:00 [PATCH v3 0/4] Add support of color temperature and chromaticity Srinivas Pandruvada
2024-01-09 18:00 ` Srinivas Pandruvada [this message]
2024-01-13 16:03 ` [PATCH v3 1/4] iio: hid-sensor-als: Assign channels dynamically Jonathan Cameron
2024-02-04 13:06 ` Srinivas Pandruvada
2024-01-25 5:51 ` Basavaraj Natikar
2024-01-25 6:01 ` Srinivas Pandruvada
2024-01-09 18:00 ` [PATCH v3 2/4] iio: hid-sensor-als: Remove hardcoding of values for enums Srinivas Pandruvada
2024-01-09 18:00 ` [PATCH v3 3/4] iio: hid-sensor-als: Add light color temperature support Srinivas Pandruvada
2024-01-25 5:55 ` Basavaraj Natikar
2024-01-09 18:00 ` [PATCH v3 4/4] iio: hid-sensor-als: Add light chromaticity support Srinivas Pandruvada
2024-01-25 5:56 ` Basavaraj Natikar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240109180007.3373784-2-srinivas.pandruvada@linux.intel.com \
--to=srinivas.pandruvada@linux.intel.com \
--cc=Basavaraj.Natikar@amd.com \
--cc=jic23@kernel.org \
--cc=jikos@kernel.org \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox