Re: [PATCH 2/2] iio: accel: adxl367: fix I2C FIFO data register

[Jonathan Cameron <jic23@kernel.org>]

On Wed, 07 Feb 2024 10:08:38 +0100
Nuno Sá <noname.nuno@gmail.com> wrote:

> On Wed, 2024-02-07 at 05:36 +0200, Cosmin Tanislav wrote:
> > As specified in the datasheet, the I2C FIFO data register is
> > 0x18, not 0x42. 0x42 was used by mistake when adapting the
> > ADXL372 driver.
For future reference (not worth a v2): You could wrap a little longer - 75
chars is fine normally for commit messages.  
> > 
> > Fix this mistake.
> > 
> > Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com>
> > ---  
> 
> This needs a Fixes: tag. With that:
> 
> Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Fine to just reply to each of these emails with an appropriate
fixes tag - no need for a v2.


> 
> >  drivers/iio/accel/adxl367_i2c.c | 2 +-
> >  1 file changed, 1 insertion(+), 1 deletion(-)
> > 
> > diff --git a/drivers/iio/accel/adxl367_i2c.c b/drivers/iio/accel/adxl367_i2c.c
> > index b595fe94f3a3..62c74bdc0d77 100644
> > --- a/drivers/iio/accel/adxl367_i2c.c
> > +++ b/drivers/iio/accel/adxl367_i2c.c
> > @@ -11,7 +11,7 @@
> >  
> >  #include "adxl367.h"
> >  
> > -#define ADXL367_I2C_FIFO_DATA	0x42
> > +#define ADXL367_I2C_FIFO_DATA	0x18
> >  
> >  struct adxl367_i2c_state {
> >  	struct regmap *regmap;  
>