From: Jonathan Cameron <jic23@kernel.org>
To: gregkh@linuxfoundation.org, linux-iio@vger.kernel.org
Subject: Re: [PULL] IIO: First set of new device support, features and cleanup for 6.9
Date: Thu, 22 Feb 2024 19:13:31 +0000 [thread overview]
Message-ID: <20240222191331.75b32286@jic23-huawei> (raw)
In-Reply-To: <20240222190623.44f36707@jic23-huawei>
On Thu, 22 Feb 2024 19:06:23 +0000
Jonathan Cameron <jic23@kernel.org> wrote:
> The following changes since commit 6613476e225e090cc9aad49be7fa504e290dd33d:
>
> Linux 6.8-rc1 (2024-01-21 14:11:32 -0800)
>
> are available in the Git repository at:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-6.9a
>
> for you to fetch changes up to 3cc5ebd3a2d6247aeba81873d6b040d5d87f7db1:
>
> iio: imu: bmi323: Add ACPI Match Table (2024-02-19 19:34:44 +0000)
>
Hi Greg,
There is a small conflict in here due to racing with a fix that went
through the dt tree.
Stephen has been carrying a fix up in linux-next which resolves it as expected.
https://lore.kernel.org/linux-next/20240219143945.1460f25f@canb.auug.org.au/
Thanks,
Jonathan
> ----------------------------------------------------------------
> IIO: 1st set of new device support, features and cleanup for 6.9
>
> IIO Backend support
> ===================
>
> New approach from Nuno Sa to the problem of reuse of drivers with
> IIO devices that are actually the combination of a highspeed chip
> and an FPGA core handling the data capture and flows. It will hopefully
> also apply to some other split designs. The ad9467 and axi-adi drivers
> are converted over to this framework.
>
> New device support
> ==================
>
> adi,admfm2000
> - New driver for this dual microwave down converter.
> ams,as73211
> - Add support for as7331 UV sensor.
> richtek,rtq6056
> - Add support for related parts RTQ6053 and RTQ6059
> st,lsm6dsx
> - Add ASM330LHHXG1 accelerometer and gyro support (mainly IDs)
> ti,ads1298
> - New driver for this medical ADC.
>
> Features
> ========
>
> tests
> - Unit tests for the gain-time-scale helper library.
> bosch,bmi088
> - I2C support.
> bosh,bmi160
> - Add 10EC5280 ACPI ID. Used in a number of devices that won't get fixed.
> The ID is actually a PCI ID belonging to realtech. No response was received
> to earlier attempts to notify them of this.
> The manufacturers of some devices have replied to say they will not fix
> this incorrect ID. Add the ID and hope it isn't a problem.
> bosch,bmi323
> - Add BOSC0200 ACPI ID. Note this is a duplicate of one in the bmc150
> driver (it appears these parts share a windows driver).
> Both drivers perform an ID check that is safe on the other part before
> successfully probing.
> hid-sensors-als
> - Add color temperature and chromaticity support. Note this is a replacement
> for the series reverted in 6.8 that correctly handles all the potential
> channel combinations.
> honeywell,hsc030pa
> - Triggered buffer support (after driver cleanup).
> honeywell,mprls00025pa
> - Improved error handling.
> - New DT binding to allow use of part number triplet as provided in data sheet
> to specify equivalent of most of the binding more efficiently.
> - SPI support.
> memsic,mxc4005
> - ACPI ID MDA6655 as seen in the Chuwi Minibook X 2023
> ti,hdc3020
> - Add threshold event support (after some driver cleanup)
> veml,vcnl4000
> - Switch to high resolution proximity measurement.
>
> Cleanup
> =======
> Various minor typo fixes and better use of defines etc.
>
> Treewide
> - Stop using ACPI_PTR(). The savings in space are small and not worth
> the complexity of __maybe_unused of ifdef guards. To avoid use in
> new IIO drivers based on copy and paste, clean it out.
> - cleanup.h based handling of iio_device_claim_direct_mode()/
> iio_device_release_direct_mode() using scope_cond_guard().
> In many drivers this is combined with other automated cleanup
> to give maximum simplifications.
> An initial set of drivers are converted over to this infrastructure.
>
> Tools
> - Use rewinddir() instead of seekdir() to return to start of file.
>
> core
> - Make iio_bus_type constant.
>
> adi,ad16475
> - Use irq_get_trigger_type() instead of opencoding.
> adi,ad16480
> - Use irq_get_trigger_type() instead of opencoding.
> adi,ad-sigma-delta
> - Avoid overwriting IRQ flags if provided by firmware.
> ams,as73211
> - Use IIO_VAL_FRACTIONAL for scales to simplify the code and potentially
> improve accuracy.
> gts-library
> - Use a div64_u64() instead of a loop to do a division.
> honeywell,mprls00025pa
> - Clean up dt-binding doc.
> - Drop defaults when DT binding not providing values. Very unlikely
> these were useful given they were wrong for vast majority of supported
> devices.
> - Whitespace cleanup
> miramems,da280
> - Use i2c_get_match_data() to replace hand rolled ACPI matching code.
> semtech,sx9324
> - Avoid unnecessary copying of property strings.
> st,lsm6dsx
> - Improve docs, particularly wrt to making addition of new device
> support less noisy.
> st,lsm9ds0
> - Use dev_err_probe() in all probe() error handling.
> - Improved header includes.
> - Tidy up termination of ID tables.
> ti,ads1014
> - Correct upper bound on PGA (wrong value had no actual impact)
> ti,afe4403/4404
> - devm_ useage to simplify error handling in probe() and allow() remove to
> be dropped.
> voltage-divider
> - Add dt-binding for io-channel-cells to allow such a device to be both
> an IIO consumer and IIO producer at the same time.
>
> ----------------------------------------------------------------
> Amit Dhingra (1):
> MAINTAINERS: correct file entry for AD7091R
>
> Andrew Davis (4):
> iio: health: afe4403: Use devm action helper for regulator disable
> iio: health: afe4403: Use devm IIO helpers
> iio: health: afe4404: Use devm action helper for regulator disable
> iio: health: afe4404: Use devm IIO helpers
>
> Basavaraj Natikar (2):
> iio: hid-sensor-als: Add light color temperature support
> iio: hid-sensor-als: Add light chromaticity support
>
> ChiYuan Huang (2):
> dt-bindings: iio: adc: rtq6056: add support for the whole RTQ6056 family
> iio: adc: rtq6056: Add support for the whole RTQ6056 family
>
> Colin Ian King (1):
> iio: invensense: remove redundant initialization of variable period
>
> David Lechner (1):
> iio: core: use INDIO_ALL_BUFFER_MODES in iio_buffer_enabled()
>
> Dimitri Fedrau (3):
> iio: humidity: hdc3020: switch to 16bit register defines
> dt-bindings: iio: humidity: hdc3020: add interrupt bindings in example
> iio: humidity: hdc3020: add threshold events support
>
> Hans de Goede (1):
> iio: accel: da280: Simplify id-matching
>
> Javier Carrasco (3):
> iio: light: as73211: use IIO_VAL_FRACTIONAL for intensity scales
> dt-bindings: iio: light: as73211: add support for as7331
> iio: light: as73211: add support for as7331
>
> Jesus Gonzalez (1):
> Add 10EC5280 to bmi160_i2c ACPI IDs to allow binding on some devices
>
> Jonathan Cameron (34):
> iio: accel: da280: Stop using ACPI_PTR()
> iio: accel: kxcjk-1013: Move acpi_device_id table under ifdef CONFIG_ACPI
> iio: accel: mma9551: Drop ACPI_PTR() usage
> iio: accel: mma9553: Drop ACPI_PTR() usage
> iio: accel: mxc4005: Drop ACPI_PTR() usage
> iio: accel: mxc6255: Drop ACPI_PTR() usage
> iio: accel: stk8ba50: Drop ACPI_PTR() usage
> iio: accel: bmc150: Drop ACPI_PTR()
> iio: gyro: bmg160: Drop ACPI_PTR() usage
> iio: humidity: hts221: Drop ACPI_PTR() usage
> iio: imu: fxos8700: Drop ACPI_PTR() usage
> iio: imu: kmx61: Drop ACPI_PTR() usage
> iio: light: jsa1212: Drop ACPI_PTR() usage
> iio: light: ltr501: Drop ACPI_PTR() usage
> iio: light: rpr0521: Drop ACPI_PTR() usage
> iio: light: stk3310: Drop ACPI_PTR() usage
> iio: light: us5182d: Drop ACPI_PTR() usage
> iio: magnetometer: bmc150: Drop ACPI_PTR() usage
> iio: magnetometer: mmc35240: Drop ACPI_PTR() usage
> iio: potentiometer: max5487: Drop ACPI_PTR() usage
> iio: st_sensors: drop ACPI_PTR() and CONFIG_ACPI guards
> iio: pressure: hp206c: drop ACPI_PTR() and CONFIG_ACPI guards
> iio: light: max44000: drop ACPI_PTR() and CONFIG_ACPI guards
> iio: adc: ti-adc109s102: drop ACPI_PTR() and CONFIG_ACPI guards
> iio: locking: introduce __cleanup() based direct mode claiming infrastructure
> iio: dummy: Use automatic lock and direct mode cleanup.
> iio: accel: adxl367: Use automated cleanup for locks and iio direct mode.
> iio: imu: bmi323: Use cleanup handling for iio_device_claim_direct_mode()
> iio: adc: max1363: Use automatic cleanup for locks and iio mode claiming.
> iio: proximity: sx9360: Use automated cleanup for locks and IIO mode claiming.
> iio: proximity: sx9324: Use automated cleanup for locks and IIO mode claiming.
> iio: proximity: sx9310: Use automated cleanup for locks and IIO mode claiming.
> iio: adc: ad4130: Use automatic cleanup of locks and direct mode.
> iio: adc: ad7091r-base: Use auto cleanup of locks.
>
> Jonathan LoBue (2):
> iio: accel: bmc150: Document duplicate ACPI entries with bmi323 driver
> iio: imu: bmi323: Add ACPI Match Table
>
> Jun Yan (1):
> iio: accel: bmi088: add i2c support for bmi088 accel driver
>
> Justin Stitt (1):
> iio: sx9324: avoid copying property strings
>
> Kim Seer Paller (2):
> dt-bindings: iio: frequency: add admfm2000
> iio: frequency: admfm2000: New driver
>
> Lorenzo Bianconi (3):
> iio: imu: st_lsm6dsx: improve kernel docs and comments
> iio: imu: st_lsm6dsx: add support to ASM330LHHXG1
> dt-bindings: iio: imu: st_lsm6dsx: add asm330lhhxg1
>
> Matti Vaittinen (3):
> iio: test: test gain-time-scale helpers
> MAINTAINERS: add IIO GTS tests
> iio: gts-helper: Fix division loop
>
> Mike Looijmans (2):
> dt-bindings: iio: adc: ti-ads1298: Add bindings
> iio: adc: ti-ads1298: Add driver
>
> Mohammed Billoo (1):
> iio: adc: ti-ads1015: Use correct pga upper bound
>
> Mårten Lindahl (1):
> iio: light: vcnl4000: Set ps high definition for 4040/4200
>
> Naresh Solanki (1):
> dt-bindings: iio: afe: voltage-divider: Add io-channel-cells
>
> Nikita Mikhailevich (1):
> iio: accel: mxc4005: new ACPI ID for the MXC6655 accelerometer
>
> Nuno Sa (10):
> iio: buffer-dmaengine: make use of the 'struct device *' argument
> iio: imu: adis16475: make use of irq_get_trigger_type()
> iio: imu: adis16480: make use of irq_get_trigger_type()
> iio: adc: ad_sigma_delta: allow overwriting the IRQ flags
> dt-bindings: adc: ad9467: add new io-backend property
> dt-bindings: adc: axi-adc: update bindings for backend framework
> iio: buffer-dmaengine: export buffer alloc and free functions
> iio: add the IIO backend framework
> iio: adc: ad9467: convert to backend framework
> iio: adc: adi-axi-adc: move to backend framework
>
> Olivier Moysan (1):
> of: property: add device link support for io-backends
>
> Petre Rodan (17):
> dt-bindings: iio: pressure: honeywell,mprls0025pa.yaml improvements
> dt-bindings: iio: pressure: honeywell,mprls0025pa.yaml add pressure-triplet
> dt-bindings: iio: pressure: honeywell,mprls0025pa.yaml add spi bus
> iio: pressure: mprls0025pa fix off-by-one enum
> iio: pressure: mprls0025pa improve driver error resilience
> iio: pressure: mprls0025pa remove defaults
> iio: pressure: mprls0025pa whitespace cleanup
> iio: pressure: mprls0025pa refactor to split core and i2c parts.
> iio: pressure: mprls0025pa add triplet property
> iio: pressure: mprls0025pa add SPI driver
> tools: iio: replace seekdir() in iio_generic_buffer
> dt-bindings: iio: pressure: honeywell,hsc030pa.yaml add spi props
> iio: pressure: hsc030pa: use signed type to hold div_64() result
> iio: pressure: hsc030pa: include cleanup
> iio: pressure: hsc030pa: update datasheet URLs
> iio: pressure: hsc030pa add mandatory delay
> iio: pressure: hsc030pa add triggered buffer
>
> Randy Dunlap (1):
> iio: dummy_evgen: remove Excess kernel-doc comments
>
> Ricardo B. Marliere (1):
> iio: core: make iio_bus_type const
>
> Srinivas Pandruvada (2):
> iio: hid-sensor-als: Assign channels dynamically
> iio: hid-sensor-als: Remove hardcoding of values for enums
>
> andy.shevchenko@gmail.com (3):
> iio: st_sensors: lsm9ds0: Use dev_err_probe() everywhere
> iio: st_sensors: lsm9ds0: Don't use "proxy" headers
> iio: st_sensors: lsm9ds0: Use common style for terminator in ID tables
>
> .../devicetree/bindings/iio/adc/adi,ad9467.yaml | 4 +
> .../devicetree/bindings/iio/adc/adi,axi-adc.yaml | 8 +-
> .../bindings/iio/adc/richtek,rtq6056.yaml | 9 +-
> .../devicetree/bindings/iio/adc/ti,ads1298.yaml | 80 +++
> .../bindings/iio/afe/voltage-divider.yaml | 11 +
> .../bindings/iio/frequency/adi,admfm2000.yaml | 127 ++++
> .../bindings/iio/humidity/ti,hdc3020.yaml | 3 +
> .../devicetree/bindings/iio/imu/st,lsm6dsx.yaml | 4 +-
> .../devicetree/bindings/iio/light/ams,as73211.yaml | 7 +-
> .../bindings/iio/pressure/honeywell,hsc030pa.yaml | 3 +
> .../iio/pressure/honeywell,mprls0025pa.yaml | 98 ++-
> MAINTAINERS | 22 +-
> drivers/iio/Kconfig | 9 +
> drivers/iio/Makefile | 1 +
> drivers/iio/accel/Kconfig | 8 +-
> drivers/iio/accel/Makefile | 1 +
> drivers/iio/accel/adxl367.c | 297 ++++----
> drivers/iio/accel/bmc150-accel-i2c.c | 15 +-
> drivers/iio/accel/bmc150-accel-spi.c | 3 +-
> drivers/iio/accel/bmi088-accel-i2c.c | 70 ++
> drivers/iio/accel/da280.c | 66 +-
> drivers/iio/accel/kxcjk-1013.c | 33 +-
> drivers/iio/accel/mma9551.c | 4 +-
> drivers/iio/accel/mma9553.c | 4 +-
> drivers/iio/accel/mxc4005.c | 5 +-
> drivers/iio/accel/mxc6255.c | 4 +-
> drivers/iio/accel/st_accel_i2c.c | 5 +-
> drivers/iio/accel/stk8ba50.c | 4 +-
> drivers/iio/adc/Kconfig | 15 +-
> drivers/iio/adc/Makefile | 1 +
> drivers/iio/adc/ad4130.c | 131 ++--
> drivers/iio/adc/ad7091r-base.c | 25 +-
> drivers/iio/adc/ad9467.c | 267 ++++---
> drivers/iio/adc/ad_sigma_delta.c | 7 +-
> drivers/iio/adc/adi-axi-adc.c | 385 +++--------
> drivers/iio/adc/max1363.c | 171 +++--
> drivers/iio/adc/rtq6056.c | 275 +++++++-
> drivers/iio/adc/ti-adc108s102.c | 4 +-
> drivers/iio/adc/ti-ads1015.c | 2 +-
> drivers/iio/adc/ti-ads1298.c | 769 +++++++++++++++++++++
> drivers/iio/buffer/industrialio-buffer-dmaengine.c | 11 +-
> .../iio/common/inv_sensors/inv_sensors_timestamp.c | 2 +-
> drivers/iio/dummy/iio_dummy_evgen.c | 2 -
> drivers/iio/dummy/iio_simple_dummy.c | 185 +++--
> drivers/iio/frequency/Kconfig | 10 +
> drivers/iio/frequency/Makefile | 1 +
> drivers/iio/frequency/admfm2000.c | 282 ++++++++
> drivers/iio/gyro/bmg160_i2c.c | 4 +-
> drivers/iio/health/afe4403.c | 65 +-
> drivers/iio/health/afe4404.c | 65 +-
> drivers/iio/humidity/hdc3020.c | 445 ++++++++----
> drivers/iio/humidity/hts221_i2c.c | 4 +-
> drivers/iio/imu/adis16475.c | 8 +-
> drivers/iio/imu/adis16480.c | 9 +-
> drivers/iio/imu/bmi160/bmi160_i2c.c | 9 +
> drivers/iio/imu/bmi323/bmi323_core.c | 78 +--
> drivers/iio/imu/bmi323/bmi323_i2c.c | 21 +
> drivers/iio/imu/fxos8700_i2c.c | 3 +-
> drivers/iio/imu/fxos8700_spi.c | 3 +-
> drivers/iio/imu/kmx61.c | 2 +-
> drivers/iio/imu/st_lsm6dsx/Kconfig | 31 +-
> drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 2 +
> drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c | 28 +-
> drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 33 +-
> drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c | 5 +
> drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c | 5 +
> drivers/iio/imu/st_lsm9ds0/st_lsm9ds0.h | 5 +-
> drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_core.c | 21 +-
> drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_i2c.c | 6 +-
> drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_spi.c | 4 +-
> drivers/iio/industrialio-backend.c | 418 +++++++++++
> drivers/iio/industrialio-core.c | 6 +-
> drivers/iio/industrialio-gts-helper.c | 15 +-
> drivers/iio/light/Kconfig | 5 +-
> drivers/iio/light/as73211.c | 142 +++-
> drivers/iio/light/hid-sensor-als.c | 122 +++-
> drivers/iio/light/jsa1212.c | 4 +-
> drivers/iio/light/ltr501.c | 3 +-
> drivers/iio/light/max44000.c | 6 +-
> drivers/iio/light/rpr0521.c | 4 +-
> drivers/iio/light/stk3310.c | 4 +-
> drivers/iio/light/us5182d.c | 4 +-
> drivers/iio/light/vcnl4000.c | 36 +-
> drivers/iio/magnetometer/bmc150_magn_i2c.c | 3 +-
> drivers/iio/magnetometer/bmc150_magn_spi.c | 3 +-
> drivers/iio/magnetometer/mmc35240.c | 4 +-
> drivers/iio/potentiometer/max5487.c | 4 +-
> drivers/iio/pressure/Kconfig | 16 +-
> drivers/iio/pressure/Makefile | 2 +
> drivers/iio/pressure/hp206c.c | 6 +-
> drivers/iio/pressure/hsc030pa.c | 49 +-
> drivers/iio/pressure/hsc030pa.h | 7 +
> drivers/iio/pressure/hsc030pa_i2c.c | 9 +-
> drivers/iio/pressure/hsc030pa_spi.c | 7 +-
> drivers/iio/pressure/mprls0025pa.c | 313 ++++-----
> drivers/iio/pressure/mprls0025pa.h | 102 +++
> drivers/iio/pressure/mprls0025pa_i2c.c | 100 +++
> drivers/iio/pressure/mprls0025pa_spi.c | 92 +++
> drivers/iio/pressure/st_pressure_i2c.c | 5 +-
> drivers/iio/proximity/sx9310.c | 114 ++-
> drivers/iio/proximity/sx9324.c | 178 +++--
> drivers/iio/proximity/sx9360.c | 115 ++-
> drivers/iio/test/Kconfig | 14 +
> drivers/iio/test/Makefile | 1 +
> drivers/iio/test/iio-test-gts.c | 513 ++++++++++++++
> drivers/of/property.c | 2 +
> include/linux/hid-sensor-ids.h | 4 +
> include/linux/iio/adc/adi-axi-adc.h | 68 --
> include/linux/iio/backend.h | 72 ++
> include/linux/iio/buffer-dmaengine.h | 3 +
> include/linux/iio/iio.h | 30 +-
> tools/iio/iio_utils.c | 2 +-
> 112 files changed, 5038 insertions(+), 1875 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/iio/adc/ti,ads1298.yaml
> create mode 100644 Documentation/devicetree/bindings/iio/frequency/adi,admfm2000.yaml
> create mode 100644 drivers/iio/accel/bmi088-accel-i2c.c
> create mode 100644 drivers/iio/adc/ti-ads1298.c
> create mode 100644 drivers/iio/frequency/admfm2000.c
> create mode 100644 drivers/iio/industrialio-backend.c
> create mode 100644 drivers/iio/pressure/mprls0025pa.h
> create mode 100644 drivers/iio/pressure/mprls0025pa_i2c.c
> create mode 100644 drivers/iio/pressure/mprls0025pa_spi.c
> create mode 100644 drivers/iio/test/iio-test-gts.c
> delete mode 100644 include/linux/iio/adc/adi-axi-adc.h
> create mode 100644 include/linux/iio/backend.h
>
next prev parent reply other threads:[~2024-02-22 19:13 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-22 19:06 [PULL] IIO: First set of new device support, features and cleanup for 6.9 Jonathan Cameron
2024-02-22 19:13 ` Jonathan Cameron [this message]
2024-02-25 13:12 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240222191331.75b32286@jic23-huawei \
--to=jic23@kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-iio@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox