Re: [PATCH v7] dt-bindings: iio: humidity: hdc20x0: add optional interrupts property

[Jonathan Cameron <jic23@kernel.org>]

On Mon, 19 Feb 2024 15:48:21 +0100
Josua Mayer <josua@solid-run.com> wrote:

> HDC2010 and HDC2080 humidity sensors both have an interrupt / data-ready
> signal which can be used for signaling to the host.
> 
> Add binding for "interrupts" property so that boards wiring this signal
> may describe the connection.
> 
> Signed-off-by: Josua Mayer <josua@solid-run.com>
> Acked-by: Rob Herring <robh@kernel.org>
Applied to the togreg branch of iio.git but pushed out initially
as testing so the autobuilders can have their fun.

Jonathan
> ---
> Changes in v7:
> - split out of original patchset because it should go via iio tree
> - collected acked-by Rob Herring from v6
> - Link to v6: https://lore.kernel.org/r/20240212-add-am64-som-v6-0-b59edb2bc8c3@solid-run.com
> ---
>  Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml b/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml
> index 79e75a8675cb..e3eca8917517 100644
> --- a/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml
> +++ b/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml
> @@ -27,6 +27,9 @@ properties:
>    reg:
>      maxItems: 1
>  
> +  interrupts:
> +    maxItems: 1
> +
>  required:
>    - compatible
>    - reg
> 
> ---
> base-commit: 6613476e225e090cc9aad49be7fa504e290dd33d
> change-id: 20240219-iio-hdc20x0-interrupt-binding-42307b7b99b5
> 
> Best regards,