From: Judith Mendez <jm@ti.com>
To: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will@kernel.org>,
William Breathitt Gray <william.gray@linaro.org>
Cc: David Lechner <david@lechnology.com>,
<linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-iio@vger.kernel.org>
Subject: [PATCH 4/7] arm64: dts: ti: k3-am64-main: Add eQEP nodes
Date: Thu, 18 Apr 2024 17:14:14 -0500 [thread overview]
Message-ID: <20240418221417.1592787-5-jm@ti.com> (raw)
In-Reply-To: <20240418221417.1592787-1-jm@ti.com>
Add eQEP DT nodes 0-2 for AM642 SoC.
Since external hardware was needed to test eQEP, the DT nodes
for eQEP were not included in the introductory commit. Now that
eQEP has been validated, add nodes to k3-am64-main.dtsi.
Fixes: 8abae9389bdb ("arm64: dts: ti: Add support for AM642 SoC")
Signed-off-by: Judith Mendez <jm@ti.com>
---
arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 30 ++++++++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
index 6f9aa5e02138f..e7d31d7e0426c 100644
--- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
@@ -1171,6 +1171,36 @@ ecap2: pwm@23120000 {
status = "disabled";
};
+ eqep0: counter@23200000 {
+ compatible = "ti,am3352-eqep";
+ reg = <0x00 0x23200000 0x00 0x100>;
+ power-domains = <&k3_pds 59 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 59 0>;
+ clock-names = "fck";
+ interrupts = <GIC_SPI 116 IRQ_TYPE_EDGE_RISING>;
+ status = "disabled";
+ };
+
+ eqep1: counter@23210000 {
+ compatible = "ti,am3352-eqep";
+ reg = <0x00 0x23210000 0x00 0x100>;
+ power-domains = <&k3_pds 60 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 60 0>;
+ clock-names = "fck";
+ interrupts = <GIC_SPI 117 IRQ_TYPE_EDGE_RISING>;
+ status = "disabled";
+ };
+
+ eqep2: counter@23220000 {
+ compatible = "ti,am3352-eqep";
+ reg = <0x00 0x23220000 0x00 0x100>;
+ power-domains = <&k3_pds 62 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 62 0>;
+ clock-names = "fck";
+ interrupts = <GIC_SPI 118 IRQ_TYPE_EDGE_RISING>;
+ status = "disabled";
+ };
+
main_rti0: watchdog@e000000 {
compatible = "ti,j7-rti-wdt";
reg = <0x00 0xe000000 0x00 0x100>;
--
2.43.2
next prev parent reply other threads:[~2024-04-18 22:15 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-18 22:14 [PATCH 0/7] Enable eQEP DT support for Sitara K3 platforms Judith Mendez
2024-04-18 22:14 ` [PATCH 1/7] arm64: dts: ti: k3-am62-main: Add eQEP nodes Judith Mendez
2024-04-19 13:56 ` Krzysztof Kozlowski
2024-04-22 22:07 ` Judith Mendez
2024-04-18 22:14 ` [PATCH 2/7] arm64: dts: ti: k3-am62a-main: " Judith Mendez
2024-04-18 22:14 ` [PATCH 3/7] arm64: dts: ti: k3-am62p-main: " Judith Mendez
2024-04-18 22:14 ` Judith Mendez [this message]
2024-04-18 22:14 ` [PATCH 5/7] dt-bindings: counter: Update TI eQEP binding Judith Mendez
2024-04-19 13:55 ` Krzysztof Kozlowski
2024-04-22 22:11 ` Judith Mendez
2024-04-23 9:54 ` Krzysztof Kozlowski
2024-04-22 18:25 ` David Lechner
2024-04-22 22:15 ` Judith Mendez
2024-04-18 22:14 ` [PATCH 6/7] counter: ti-eqep: Allow eQEP driver to be built for K3 devices Judith Mendez
2024-04-18 22:14 ` [PATCH 7/7] arm64: defconfig: Enable TI eQEP Driver Judith Mendez
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240418221417.1592787-5-jm@ti.com \
--to=jm@ti.com \
--cc=catalin.marinas@arm.com \
--cc=conor+dt@kernel.org \
--cc=david@lechnology.com \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=will@kernel.org \
--cc=william.gray@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox