Re: (subset) [PATCH v6 0/7] Add support for AD4000 series of ADCs

[Jonathan Cameron <jic23@kernel.org>]

On Mon, 29 Jul 2024 19:02:23 +0100
Mark Brown <broonie@kernel.org> wrote:

> On Sat, 29 Jun 2024 16:04:00 -0300, Marcelo Schmitt wrote:
> > This patch series extends the SPI bitbang, gpio, and spi-engine controllers to
> > support configurable MOSI line idle states.
> > It then introduces the ad4000 driver which uses the MOSI idle configuration to
> > provide improved support for the AD4000 series of ADCs.
> > Documentation is added describing the new extension to the SPI protocol.
> > The currently supported wiring modes for AD4000 devices were documented under
> > IIO documentation directory.
> > 
> > [...]  
> 
> Applied to
> 
>    https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next
> 
> Thanks!
> 
> [1/7] spi: Enable controllers to extend the SPI protocol with MOSI idle configuration
>       commit: f58872f45c36ded048bccc22701b0986019c24d8
> [2/7] spi: bitbang: Implement support for MOSI idle state configuration
>       commit: 320f6693097bf89d67f9cabad24a2b911e23073f
> [3/7] spi: spi-gpio: Add support for MOSI idle state configuration
>       commit: 927d382c7efbcc2206c31fa2f672fa264c0f1d5b
> [4/7] spi: spi-axi-spi-engine: Add support for MOSI idle configuration
>       commit: a62073f4b2164028fc7c5ae45ceba10c9326cd91
Hi Mark,

Any chance of a tag + you seem to have also picked up the ADC dt binding.
Patch 5/7. dt-bindings: iio: adc: Add AD4000
which I'm assuming was not intentional.

I think I only need the definition of SPI_MOSI_IDLE_HIGH
for 5-7 to build fine.

If needed, I can use a local value for that in the driver and
we can follow up with a patch using the main define once the trees
come together upstream.

Jonathan


> 
> All being well this means that it will be integrated into the linux-next
> tree (usually sometime in the next 24 hours) and sent to Linus during
> the next merge window (or sooner if it is a bug fix), however if
> problems are discovered then the patch may be dropped or reverted.
> 
> You may get further e-mails resulting from automated or manual testing
> and review of the tree, please engage with people reporting problems and
> send followup patches addressing any issues that are reported if needed.
> 
> If any updates are required or you are submitting further changes they
> should be sent as incremental updates against current git, existing
> patches will not be replaced.
> 
> Please add any relevant lists and maintainers to the CCs when replying
> to this mail.
> 
> Thanks,
> Mark
>