[PATCH v2 1/2] dt-bindings: iio: dac: add docs for ad8460

[Mariel Tinaco <Mariel.Tinaco@analog.com>]

This adds the bindings documentation for the 14-bit
High Voltage, High Current, Waveform Generator
Digital-to-Analog converter.

Signed-off-by: Mariel Tinaco <Mariel.Tinaco@analog.com>
---
 .../bindings/iio/dac/adi,ad8460.yaml          | 154 ++++++++++++++++++
 MAINTAINERS                                   |   7 +
 2 files changed, 161 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/dac/adi,ad8460.yaml

diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad8460.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad8460.yaml
new file mode 100644
index 000000000..6a7031d0d
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad8460.yaml
@@ -0,0 +1,154 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2024 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad8460.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD8460 DAC
+
+maintainers:
+  - Mariel Tinaco <mariel.tinaco@analog.com>
+
+description: |
+  Analog Devices AD8460 110 V High Voltage, 1 A High Current,
+  Arbitrary Waveform Generator with Integrated 14-Bit High Speed DAC
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad8460.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad8460
+
+  reg:
+    maxItems: 1
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    items:
+      - const: tx
+
+  spi-max-frequency:
+    maximum: 20000000
+
+  hvcc-supply:
+    description: Positive high voltage power supply line
+
+  hvee-supply:
+    description: Negative high voltage power supply line
+
+  vcc-5v-supply:
+    description: Low voltage power supply
+
+  vref-5v-supply:
+    description: Reference voltage for analog low voltage and protection threshold DACs.
+
+  dvdd-3p3v-supply:
+    description: Digital supply bypass
+
+  avdd-3p3v-supply:
+    description: Analog supply bypass
+
+  refio-1p2v-supply:
+    description: Drive voltage in the range of 1.2V maximum to as low as
+      low as 0.12V through the REF_IO pin to adjust full scale output span
+
+  clocks:
+    description: The clock for the DAC. This is the sync clock
+
+  adi,rset-ohms:
+    description: Specify value of external resistor connected to FS_ADJ pin
+      to establish internal HVDAC's reference current I_REF
+    default: 2000
+    minimum: 2000
+    maximum: 20000
+
+  adi,range-microvolt:
+    description: |
+      Voltage output range specified as <minimum, maximum>
+    oneOf:
+      - items:
+          - const: -40000000
+          - const: 40000000
+
+  adi,range-microamp:
+    description: |
+      Current output range specified as <minimum, maximum>
+    oneOf:
+      - items:
+          - const: 0
+          - const: 50000
+      - items:
+          - const: -50000
+          - const: 50000
+
+  adi,temp-max-millicelsius:
+    description: Overtemperature threshold
+    default: 50000
+    minimum: 20000
+    maximum: 150000
+
+  sdn-reset-gpios:
+    description: GPIO spec for the SHUTDOWN RESET pin. As the line is active high,
+      it should be marked GPIO_ACTIVE_HIGH.
+    maxItems: 1
+
+  reset-gpios:
+    description: GPIO spec for the RESET pin. As the line is active low, it
+      should be marked GPIO_ACTIVE_LOW.
+    maxItems: 1
+
+  sdn-io-gpios:
+    description: GPIO spec for the SHUTDOWN INPUT/OUTPUT pin. As the line is
+      active high, it should be marked GPIO_ACTIVE_HIGH.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@0 {
+            compatible = "adi,ad8460";
+            reg = <0>;
+            spi-max-frequency = <8000000>;
+            adi,rset-ohms = <2000>;
+            adi,range-microvolt = <(-40000000) 40000000>;
+            adi,range-microamp = <0 50000>;
+            adi,temp-max-millicelsius = <50000>;
+
+            dmas = <&tx_dma 0>;
+            dma-names = "tx";
+
+            sdn-reset-gpios = <&gpio 86 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpio 91 GPIO_ACTIVE_LOW>;
+            sdn-io-gpios = <&gpio 88 GPIO_ACTIVE_HIGH>;
+
+            clocks = <&sync_ext_clk>;
+
+            hvcc-supply = <&hvcc>;
+            hvee-supply = <&hvee>;
+            vcc-5v-supply = <&vcc_5>;
+            vref-5v-supply = <&vref_5>;
+            dvdd-3p3v-supply = <&dvdd_3_3>;
+            avdd-3p3v-supply = <&avdd_3_3>;
+            refio-1p2v-supply = <&refio_1_2>;
+        };
+    };
+
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index 758c202ec..dae93df2a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1234,6 +1234,13 @@ W:	https://ez.analog.com/linux-software-drivers
 F:	Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
 F:	drivers/iio/adc/ad7780.c
 
+ANALOG DEVICES INC AD8460 DRIVER
+M:	Mariel Tinaco <Mariel.Tinaco@analog.com>
+L:	linux-iio@vger.kernel.org
+S:	Supported
+W:	https://ez.analog.com/linux-software-drivers
+F:	Documentation/devicetree/bindings/iio/dac/adi,ad8460.yaml
+
 ANALOG DEVICES INC AD9739a DRIVER
 M:	Nuno Sa <nuno.sa@analog.com>
 M:	Dragos Bogdan <dragos.bogdan@analog.com>
-- 
2.34.1