From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@kernel.org>
To: linux-iio@vger.kernel.org
Cc: Lars-Peter Clausen <lars@metafoo.de>,
Michael Hennerich <Michael.Hennerich@analog.com>,
Jonathan Cameron <jic23@kernel.org>,
Olivier Moysan <olivier.moysan@foss.st.com>,
Dragos Bogdan <dragos.bogdan@analog.com>
Subject: [PATCH v2 6/8] iio: adc: adi-axi-adc: implement backend debugfs interface
Date: Fri, 02 Aug 2024 16:27:04 +0200 [thread overview]
Message-ID: <20240802-dev-iio-backend-add-debugfs-v2-6-4cb62852f0d0@analog.com> (raw)
In-Reply-To: <20240802-dev-iio-backend-add-debugfs-v2-0-4cb62852f0d0@analog.com>
From: Nuno Sa <nuno.sa@analog.com>
Implement debugfs options to read/write registers and print the channel
status into a buffer (so we may know better the cause for errors) .
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
---
drivers/iio/adc/adi-axi-adc.c | 41 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 41 insertions(+)
diff --git a/drivers/iio/adc/adi-axi-adc.c b/drivers/iio/adc/adi-axi-adc.c
index 442a87024e1a..5c8c87eb36d1 100644
--- a/drivers/iio/adc/adi-axi-adc.c
+++ b/drivers/iio/adc/adi-axi-adc.c
@@ -61,6 +61,10 @@
#define ADI_AXI_ADC_REG_CHAN_STATUS(c) (0x0404 + (c) * 0x40)
#define ADI_AXI_ADC_CHAN_STAT_PN_MASK GENMASK(2, 1)
+/* out of sync */
+#define ADI_AXI_ADC_CHAN_STAT_PN_OOS BIT(1)
+/* spurious out of sync */
+#define ADI_AXI_ADC_CHAN_STAT_PN_ERR BIT(2)
#define ADI_AXI_ADC_REG_CHAN_CTRL_3(c) (0x0418 + (c) * 0x40)
#define ADI_AXI_ADC_CHAN_PN_SEL_MASK GENMASK(19, 16)
@@ -246,6 +250,30 @@ static int axi_adc_chan_status(struct iio_backend *back, unsigned int chan,
return 0;
}
+static int axi_adc_debugfs_print_chan_status(struct iio_backend *back,
+ unsigned int chan, char *buf,
+ size_t len)
+{
+ struct adi_axi_adc_state *st = iio_backend_get_priv(back);
+ u32 val;
+ int ret;
+
+ ret = axi_adc_read_chan_status(st, chan, &val);
+ if (ret)
+ return ret;
+
+ /*
+ * PN_ERR is cleared in case out of sync is set. Hence, no point in
+ * checking both bits.
+ */
+ if (val & ADI_AXI_ADC_CHAN_STAT_PN_OOS)
+ return scnprintf(buf, len, "CH%u: Out of Sync.\n", chan);
+ if (val & ADI_AXI_ADC_CHAN_STAT_PN_ERR)
+ return scnprintf(buf, len, "CH%u: Spurious Out of Sync.\n", chan);
+
+ return scnprintf(buf, len, "CH%u: OK.\n", chan);
+}
+
static int axi_adc_chan_enable(struct iio_backend *back, unsigned int chan)
{
struct adi_axi_adc_state *st = iio_backend_get_priv(back);
@@ -280,6 +308,17 @@ static void axi_adc_free_buffer(struct iio_backend *back,
iio_dmaengine_buffer_free(buffer);
}
+static int axi_adc_reg_access(struct iio_backend *back, unsigned int reg,
+ unsigned int writeval, unsigned int *readval)
+{
+ struct adi_axi_adc_state *st = iio_backend_get_priv(back);
+
+ if (readval)
+ return regmap_read(st->regmap, reg, readval);
+
+ return regmap_write(st->regmap, reg, writeval);
+}
+
static const struct regmap_config axi_adc_regmap_config = {
.val_bits = 32,
.reg_bits = 32,
@@ -298,6 +337,8 @@ static const struct iio_backend_ops adi_axi_adc_ops = {
.iodelay_set = axi_adc_iodelays_set,
.test_pattern_set = axi_adc_test_pattern_set,
.chan_status = axi_adc_chan_status,
+ .debugfs_reg_access = iio_backend_debugfs_ptr(axi_adc_reg_access),
+ .debugfs_print_chan_status = iio_backend_debugfs_ptr(axi_adc_debugfs_print_chan_status),
};
static const struct iio_backend_info adi_axi_adc_generic = {
--
2.45.2
next prev parent reply other threads:[~2024-08-02 14:27 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-02 14:26 [PATCH v2 0/8] iio: adc: ad9467: add debugFS test mode support Nuno Sa via B4 Relay
2024-08-02 14:26 ` [PATCH v2 1/8] iio: backend: introduce struct iio_backend_info Nuno Sa via B4 Relay
2024-08-02 14:27 ` [PATCH v2 2/8] iio: backend: add debugFs interface Nuno Sa via B4 Relay
2024-08-02 14:27 ` [PATCH v2 3/8] iio: backend: add a modified prbs23 support Nuno Sa via B4 Relay
2024-08-02 14:27 ` [PATCH v2 4/8] iio: adc: adi-axi-adc: support modified prbs23 Nuno Sa via B4 Relay
2024-08-02 14:27 ` [PATCH v2 5/8] iio: adc: adi-axi-adc: split axi_adc_chan_status() Nuno Sa via B4 Relay
2024-08-02 14:27 ` Nuno Sa via B4 Relay [this message]
2024-08-02 14:27 ` [PATCH v2 7/8] iio: adc: ad9467: add backend test mode helpers Nuno Sa via B4 Relay
2024-08-02 14:27 ` [PATCH v2 8/8] iio: adc: ad9467: add digital interface test to debugfs Nuno Sa via B4 Relay
2024-08-03 13:38 ` Jonathan Cameron
2024-08-05 6:39 ` Nuno Sá
2024-08-03 13:39 ` [PATCH v2 0/8] iio: adc: ad9467: add debugFS test mode support Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240802-dev-iio-backend-add-debugfs-v2-6-4cb62852f0d0@analog.com \
--to=devnull+nuno.sa.analog.com@kernel.org \
--cc=Michael.Hennerich@analog.com \
--cc=dragos.bogdan@analog.com \
--cc=jic23@kernel.org \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=nuno.sa@analog.com \
--cc=olivier.moysan@foss.st.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox