From: Jonathan Cameron <jic23@kernel.org>
To: gregkh@linuxfoundation.org, linux-iio@vger.kernel.org
Subject: [PULL] IIO: 1st set of fixes for 6.11
Date: Mon, 19 Aug 2024 20:37:34 +0100 [thread overview]
Message-ID: <20240819203734.0866fd2c@jic23-huawei> (raw)
The following changes since commit 8400291e289ee6b2bf9779ff1c83a291501f017b:
Linux 6.11-rc1 (2024-07-28 14:19:55 -0700)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-fixes-for-6.11a
for you to fetch changes up to 0a3b517c8089aa4cf339f41460d542c681409386:
iio: imu: inv_mpu6050: fix interrupt status read for old buggy chips (2024-08-17 15:31:41 +0100)
----------------------------------------------------------------
IIO: 1st set of fixes for 6.11
The usual mixed bag of new issues and ancient ones.
The fact so many are ADI is probably due to an uptick in upstreaming
effort from Analog + Baylibre meaning existing code is getting more eyes
on it. Hence it's a good sign not a reflection of inherent high bug
incidence!
Core and helper related
-----------------------
in kernel interfaces
- Fix missing application of scale to the integer part of
IIO_INT_PLUS_XXX value pairs when using the
iio_convert_raw_to_processed*() helper.
buffer-dmaengine
- Make sure to release DMA channel in error path.
Driver related
--------------
adi,ad-sigma-delta library
- Check irq-flags for the correct irq if multiple are provided.
adi,ad7124
- Wait after reset before reading the chip ID register.
- Compare only the relevant field when looking for an existing
config to reuse for a new channel.
- Fix an off by one in which channel config is being filled from
firmware.
adi,ad7173
- Fix missing vendor prefix in compatible strings.
- Fix wrong info for GPIO related bit positions for ad4114,ad4115 and ad4116.
adi,ad7606
- Drop incorrect check on frstdata when in serial mode, it only applies to
parallel mode.
adi,ad9834
- Check userspace input for frequency parameter to avoid div by zero.
invensense,mpu6050
- Avoid reading interrupt status on some older chips as it seems there
is a hardware problem that surfaces as a result of adding wake on
motion support to the driver (which these chips don't support).
ti,ads1119
- Fix incorrect IRQ flag (new driver so no firmware compatibility regression
issues with fixing this now).
----------------------------------------------------------------
Aleksandr Mishin (1):
staging: iio: frequency: ad9834: Validate frequency parameter value
David Lechner (1):
iio: buffer-dmaengine: fix releasing dma channel on error
Dumitru Ceclan (5):
iio: adc: ad7173: Fix incorrect compatible string
iio: adc: ad7124: fix chip ID mismatch
iio: adc: ad7124: fix config comparison
iio: adc: ad7124: fix DT configuration parsing
iio: adc: ad7173: fix GPIO device info
Francesco Dolcini (1):
iio: adc: ads1119: Fix IRQ flags
Guillaume Stols (1):
iio: adc: ad7606: remove frstdata check for serial mode
Jean-Baptiste Maneyrol (1):
iio: imu: inv_mpu6050: fix interrupt status read for old buggy chips
Matteo Martelli (1):
iio: fix scale application in iio_convert_raw_to_processed_unlocked
Nuno Sa (1):
iio: adc: ad_sigma_delta: fix irq_flags on irq request
drivers/iio/adc/ad7124.c | 30 ++++++++------
drivers/iio/adc/ad7173.c | 13 +++---
drivers/iio/adc/ad7606.c | 28 +------------
drivers/iio/adc/ad7606.h | 2 +
drivers/iio/adc/ad7606_par.c | 48 ++++++++++++++++++++--
drivers/iio/adc/ad_sigma_delta.c | 2 +-
drivers/iio/adc/ti-ads1119.c | 2 +-
drivers/iio/buffer/industrialio-buffer-dmaengine.c | 4 +-
drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c | 13 +++++-
drivers/iio/inkern.c | 8 ++--
drivers/staging/iio/frequency/ad9834.c | 2 +-
11 files changed, 92 insertions(+), 60 deletions(-)
next reply other threads:[~2024-08-19 19:37 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-19 19:37 Jonathan Cameron [this message]
2024-09-03 10:17 ` [PULL] IIO: 1st set of fixes for 6.11 Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240819203734.0866fd2c@jic23-huawei \
--to=jic23@kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-iio@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox