From: Vasileios Amoiridis <vassilisamir@gmail.com>
To: jic23@kernel.org, lars@metafoo.de, robh@kernel.org,
krzk+dt@kernel.org, conor+dt@kernel.org,
andriy.shevchenko@linux.intel.com
Cc: vassilisamir@gmail.com, ang.iglesiasg@gmail.com,
linus.walleij@linaro.org, biju.das.jz@bp.renesas.com,
javier.carrasco.cruz@gmail.com, semen.protsenko@linaro.org,
579lpy@gmail.com, ak@it-klinger.de, linux-iio@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v3 0/7] pressure: bmp280: Minor cleanup and interrupt support
Date: Fri, 23 Aug 2024 20:17:07 +0200 [thread overview]
Message-ID: <20240823181714.64545-1-vassilisamir@gmail.com> (raw)
Depends on this: https://lore.kernel.org/linux-iio/20240823172017.9028-1-vassilisamir@gmail.com
Changes in v3:
[PATCH v3 1/7]:
- Moved the indexing enum on top of the calibration buffer and added a
comment that the reason for the complex accesses can be found in the
datasheet.
[PATCH v3 2/7]:
- Use dev_err_probe() instead of dev_err() since the .preinit function
is called only from the probe.
[PATCH v3 4/7]:
- Made static the const int arrays.
- Changed the comment from "future" versions to "newer" versions.
- The current state of the board is saved into a variable in order to be
able to be recovered after a suspend/resume operation.
[PATCH v3 5/7]:
- Corrected syntax error.
[PATCH v3 6/7]:
- Merged the bmp{3,5}80_trigger_probe() functions to one by using a
general __bmp280_trigger_probe() which takes the sensor specific
functions as interrupts.
[PATCH v3 7/7]:
- Fixed the bmp085_chip_info array by duplicating the bmp180_chip_info
and just adding the extra variable for the bmp085 interrupt.
v2: https://lore.kernel.org/linux-iio/20240725231039.614536-1-vassilisamir@gmail.com
Vasileios Amoiridis (7):
iio: pressure: bmp280: Use bulk read for humidity calibration data
iio: pressure: bmp280: Add support for bmp280 soft reset
iio: pressure: bmp280: Remove config error check for IIR filter
updates
iio: pressure: bmp280: Use sleep and forced mode for oneshot captures
dt-bindings: iio: pressure: bmp085: Add interrupts for BMP3xx and
BMP5xx devices
iio: pressure: bmp280: Add data ready trigger support
iio: pressure: bmp280: Move bmp085 interrupt to new configuration
.../bindings/iio/pressure/bmp085.yaml | 7 +-
drivers/iio/pressure/bmp280-core.c | 691 +++++++++++++++---
drivers/iio/pressure/bmp280-i2c.c | 4 +-
drivers/iio/pressure/bmp280-spi.c | 4 +-
drivers/iio/pressure/bmp280.h | 52 ++
5 files changed, 667 insertions(+), 91 deletions(-)
base-commit: 0f718e10da81446df0909c9939dff2b77e3b4e95
prerequisite-patch-id: e4f81f31f4fbb2aa872c0c74ed4511893eee0c9a
--
2.25.1
next reply other threads:[~2024-08-23 18:17 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-23 18:17 Vasileios Amoiridis [this message]
2024-08-23 18:17 ` [PATCH v3 1/7] iio: pressure: bmp280: Use bulk read for humidity calibration data Vasileios Amoiridis
2024-08-23 18:47 ` Andy Shevchenko
2024-08-24 11:10 ` Vasileios Amoiridis
2024-08-23 18:17 ` [PATCH v3 2/7] iio: pressure: bmp280: Add support for bmp280 soft reset Vasileios Amoiridis
2024-08-23 19:13 ` Andy Shevchenko
2024-08-24 11:16 ` Vasileios Amoiridis
2024-08-26 10:11 ` Andy Shevchenko
2024-08-25 7:04 ` Christophe JAILLET
2024-08-28 7:49 ` Vasileios Amoiridis
2024-08-23 18:17 ` [PATCH v3 3/7] iio: pressure: bmp280: Remove config error check for IIR filter updates Vasileios Amoiridis
2024-08-23 19:15 ` Andy Shevchenko
2024-08-24 11:18 ` Vasileios Amoiridis
2024-08-26 10:12 ` Andy Shevchenko
2024-08-23 18:17 ` [PATCH v3 4/7] iio: pressure: bmp280: Use sleep and forced mode for oneshot captures Vasileios Amoiridis
2024-08-23 19:25 ` Andy Shevchenko
2024-08-24 11:29 ` Vasileios Amoiridis
2024-08-26 10:17 ` Andy Shevchenko
2024-08-23 18:17 ` [PATCH v3 5/7] dt-bindings: iio: pressure: bmp085: Add interrupts for BMP3xx and BMP5xx devices Vasileios Amoiridis
2024-08-23 18:51 ` Biju Das
2024-08-24 11:31 ` Vasileios Amoiridis
2024-08-24 11:41 ` Biju Das
2024-08-24 12:09 ` Vasileios Amoiridis
2024-08-24 7:45 ` Krzysztof Kozlowski
2024-08-24 11:35 ` Vasileios Amoiridis
2024-08-25 6:57 ` Krzysztof Kozlowski
2024-08-23 18:17 ` [PATCH v3 6/7] iio: pressure: bmp280: Add data ready trigger support Vasileios Amoiridis
2024-08-23 20:06 ` Andy Shevchenko
2024-08-24 12:02 ` Vasileios Amoiridis
2024-08-26 10:01 ` Jonathan Cameron
2024-08-26 10:26 ` Andy Shevchenko
2024-08-26 10:23 ` Andy Shevchenko
2024-08-28 14:01 ` Vasileios Amoiridis
2024-08-28 14:17 ` Andy Shevchenko
2024-08-28 18:13 ` Vasileios Amoiridis
2024-08-23 18:17 ` [PATCH v3 7/7] iio: pressure: bmp280: Move bmp085 interrupt to new configuration Vasileios Amoiridis
2024-08-24 10:02 ` Jonathan Cameron
2024-08-24 12:07 ` Vasileios Amoiridis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240823181714.64545-1-vassilisamir@gmail.com \
--to=vassilisamir@gmail.com \
--cc=579lpy@gmail.com \
--cc=ak@it-klinger.de \
--cc=andriy.shevchenko@linux.intel.com \
--cc=ang.iglesiasg@gmail.com \
--cc=biju.das.jz@bp.renesas.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=javier.carrasco.cruz@gmail.com \
--cc=jic23@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=lars@metafoo.de \
--cc=linus.walleij@linaro.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=semen.protsenko@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox