Linux IIO development
 help / color / mirror / Atom feed
From: Jonathan Cameron <jic23@kernel.org>
To: jason liu <jasonliu10041728@gmail.com>
Cc: Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@tdk.com>,
	"lars@metafoo.de" <lars@metafoo.de>,
	"linux-iio@vger.kernel.org" <linux-iio@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: 回复: [PATCH] iio/inv_icm42600: add inv_icm42600 id_table
Date: Sun, 8 Sep 2024 11:51:15 +0100	[thread overview]
Message-ID: <20240908115115.1bf1155d@jic23-huawei> (raw)
In-Reply-To: <SI6PR01MB63197238674C8895885420D8F59E2@SI6PR01MB6319.apcprd01.prod.exchangelabs.com>

On Fri, 6 Sep 2024 05:02:59 +0000
jason liu <jasonliu10041728@gmail.com> wrote:

> Hello,
> 
> I'm glad this patch could help. And I would like to know, how will the patch to be handled moving forward?
> 
It is queued up on the IIO tree.  Given timing it's queued for 6.13.
Note that for now that is only pushed out as testing because I will
be rebasing the IIO togreg branch on 6.12-rc1.
One that is done it will appear in linux-next.

It should go upstream and appear in char-misc/char-misc-next
in about 6 weeks.  After that Greg KH will send a pull request during
the 6.13 merge window in about 12 weeks time and it will then hopefully
get merged into Linus' tree before 6.13-rc1 

I haven't treated this as a fix because it was never there, but
it may make sense to request a backport to stable after it is upstream.

Thanks,

Jonathan

> Thanks.
> 
> ________________________________
> From: Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@tdk.com>
> Sent: Thursday, September 5, 2024 5:25 PM
> To: jason liu <jasonliu10041728@gmail.com>
> Cc: jic23@kernel.org <jic23@kernel.org>; lars@metafoo.de <lars@metafoo.de>; linux-iio@vger.kernel.org <linux-iio@vger.kernel.org>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>
> Subject: Re: [PATCH] iio/inv_icm42600: add inv_icm42600 id_table
> 
> Hello,
> 
> looks good for me now, thanks for the patch.
> 
> Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
> 
> Thanks,
> JB
> 
> ________________________________________
> From: jason liu <jasonliu10041728@gmail.com>
> Sent: Wednesday, September 4, 2024 11:00
> To: Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@tdk.com>
> Cc: jic23@kernel.org <jic23@kernel.org>; lars@metafoo.de <lars@metafoo.de>; linux-iio@vger.kernel.org <linux-iio@vger.kernel.org>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>
> Subject: Re: [PATCH] iio/inv_icm42600: add inv_icm42600 id_table
> 
> This Message Is From an Untrusted Sender
> You have not previously corresponded with this sender.
> 
> Hello, does patch v3 meet the requirements?
> 
> BR.
> 
> Jason Liu <jasonliu10041728@gmail.com> 于2024年9月2日周一 19:31写道:
> Add the id_table of inv_icm42600, so the device can probe correctly.
> 
> Signed-off-by: Jason Liu <jasonliu10041728@gmail.com>
> ---
> V1->V2: fix up the formatting as requested
> ---
> V2->V3: add icm42686 (INV_ICM_42686) and icm42688 (INV_ICM_42688)
> ---
>  drivers/iio/imu/inv_icm42600/inv_icm42600_i2c.c | 17 +++++++++++++++++
>  drivers/iio/imu/inv_icm42600/inv_icm42600_spi.c | 17 +++++++++++++++++
>  2 files changed, 34 insertions(+)
> 
> diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600_i2c.c b/drivers/iio/imu/inv_icm42600/inv_icm42600_i2c.c
> index ebb31b385881..9e65fef04c39 100644
> --- a/drivers/iio/imu/inv_icm42600/inv_icm42600_i2c.c
> +++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_i2c.c
> @@ -71,6 +71,22 @@ static int inv_icm42600_probe(struct i2c_client *client)
>                                        inv_icm42600_i2c_bus_setup);
>  }
> 
> +/*
> + * device id table is used to identify what device can be
> + * supported by this driver
> + */
> +static const struct i2c_device_id inv_icm42600_id[] = {
> +       { "icm42600", INV_CHIP_ICM42600 },
> +       { "icm42602", INV_CHIP_ICM42602 },
> +       { "icm42605", INV_CHIP_ICM42605 },
> +       { "icm42686", INV_CHIP_ICM42686 },
> +       { "icm42622", INV_CHIP_ICM42622 },
> +       { "icm42688", INV_CHIP_ICM42688 },
> +       { "icm42631", INV_CHIP_ICM42631 },
> +       {}
> +};
> +MODULE_DEVICE_TABLE(i2c, inv_icm42600_id);
> +
>  static const struct of_device_id inv_icm42600_of_matches[] = {
>         {
>                 .compatible = "invensense,icm42600",
> @@ -104,6 +120,7 @@ static struct i2c_driver inv_icm42600_driver = {
>                 .of_match_table = inv_icm42600_of_matches,
>                 .pm = pm_ptr(&inv_icm42600_pm_ops),
>         },
> +       .id_table = inv_icm42600_id,
>         .probe = inv_icm42600_probe,
>  };
>  module_i2c_driver(inv_icm42600_driver);
> diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600_spi.c b/drivers/iio/imu/inv_icm42600/inv_icm42600_spi.c
> index eae5ff7a3cc1..75441b2be174 100644
> --- a/drivers/iio/imu/inv_icm42600/inv_icm42600_spi.c
> +++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_spi.c
> @@ -67,6 +67,22 @@ static int inv_icm42600_probe(struct spi_device *spi)
>                                        inv_icm42600_spi_bus_setup);
>  }
> 
> +/*
> + * device id table is used to identify what device can be
> + * supported by this driver
> + */
> +static const struct spi_device_id inv_icm42600_id[] = {
> +       { "icm42600", INV_CHIP_ICM42600 },
> +       { "icm42602", INV_CHIP_ICM42602 },
> +       { "icm42605", INV_CHIP_ICM42605 },
> +       { "icm42686", INV_CHIP_ICM42686 },
> +       { "icm42622", INV_CHIP_ICM42622 },
> +       { "icm42688", INV_CHIP_ICM42688 },
> +       { "icm42631", INV_CHIP_ICM42631 },
> +       {}
> +};
> +MODULE_DEVICE_TABLE(spi, inv_icm42600_id);
> +
>  static const struct of_device_id inv_icm42600_of_matches[] = {
>         {
>                 .compatible = "invensense,icm42600",
> @@ -100,6 +116,7 @@ static struct spi_driver inv_icm42600_driver = {
>                 .of_match_table = inv_icm42600_of_matches,
>                 .pm = pm_ptr(&inv_icm42600_pm_ops),
>         },
> +       .id_table = inv_icm42600_id,
>         .probe = inv_icm42600_probe,
>  };
>  module_spi_driver(inv_icm42600_driver);
> --
> 2.25.1


  parent reply	other threads:[~2024-09-08 10:51 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-08-25  6:39 [PATCH] iio/inv_icm42600: add inv_icm42600 id_table Jason Liu
2024-08-26  8:22 ` Jean-Baptiste Maneyrol
2024-08-26 10:20   ` Jonathan Cameron
     [not found]     ` <CAJci1vCztZAnmHrVn=4b9hnRmMCQE=6R7uQnznPQ0FSpFHQK5w@mail.gmail.com>
2024-09-01 14:23       ` Jonathan Cameron
2024-09-02  3:11         ` Jason Liu
2024-09-02  9:58           ` Jean-Baptiste Maneyrol
2024-09-02 11:31             ` Jason Liu
     [not found]               ` <CAJci1vC9pvdqEpA8sk+uB5jJGn_DKUruXFfY6tbG9mO07YxgHQ@mail.gmail.com>
2024-09-05  9:25                 ` Jean-Baptiste Maneyrol
2024-09-07 13:48                   ` Jonathan Cameron
     [not found]                   ` <SI6PR01MB63197238674C8895885420D8F59E2@SI6PR01MB6319.apcprd01.prod.exchangelabs.com>
2024-09-08 10:51                     ` Jonathan Cameron [this message]
2024-09-09  6:43                       ` 回复: 回复: " jason liu
2024-09-09  7:35                         ` Jonathan Cameron
2024-09-09  7:39                           ` 回复: " jason liu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240908115115.1bf1155d@jic23-huawei \
    --to=jic23@kernel.org \
    --cc=Jean-Baptiste.Maneyrol@tdk.com \
    --cc=jasonliu10041728@gmail.com \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox