From: Vasileios Amoiridis <vassilisamir@gmail.com>
To: jic23@kernel.org
Cc: dan.carpenter@linaro.org, linux-iio@vger.kernel.org,
linux-kernel@vger.kernel.org,
Vasileios Amoiridis <vassilisamir@gmail.com>
Subject: [PATCH v3 2/2] iio: pressure: bmp280: Use char instead of s32 for data buffer
Date: Mon, 30 Sep 2024 22:23:53 +0200 [thread overview]
Message-ID: <20240930202353.38203-3-vassilisamir@gmail.com> (raw)
In-Reply-To: <20240930202353.38203-1-vassilisamir@gmail.com>
As it was reported and discussed here [1], storing the sensor data in an
endian aware s32 buffer is not optimal. Advertising the timestamp as an
addition of 2 s32 variables which is also implied is again not the best
practice. For that reason, change the s32 sensor_data buffer to a u8
buffer and align it properly.
[1]: https://lore.kernel.org/linux-iio/73d13cc0-afb9-4306-b498-5d821728c3ba@stanley.mountain/
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
---
drivers/iio/pressure/bmp280-core.c | 72 ++++++++++++++++++------------
drivers/iio/pressure/bmp280.h | 4 +-
2 files changed, 46 insertions(+), 30 deletions(-)
diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c
index 472a6696303b..6811619c6f11 100644
--- a/drivers/iio/pressure/bmp280-core.c
+++ b/drivers/iio/pressure/bmp280-core.c
@@ -1023,8 +1023,9 @@ static irqreturn_t bmp280_trigger_handler(int irq, void *p)
struct iio_poll_func *pf = p;
struct iio_dev *indio_dev = pf->indio_dev;
struct bmp280_data *data = iio_priv(indio_dev);
- u32 adc_temp, adc_press;
- s32 t_fine;
+ u32 adc_temp, adc_press, comp_press;
+ s32 t_fine, comp_temp;
+ s32 *chans = (s32 *)data->sensor_data;
int ret;
guard(mutex)(&data->lock);
@@ -1044,7 +1045,7 @@ static irqreturn_t bmp280_trigger_handler(int irq, void *p)
goto out;
}
- data->sensor_data[1] = bmp280_compensate_temp(data, adc_temp);
+ comp_temp = bmp280_compensate_temp(data, adc_temp);
/* Pressure calculations */
adc_press = FIELD_GET(BMP280_MEAS_TRIM_MASK, get_unaligned_be24(&data->buf[0]));
@@ -1054,10 +1055,12 @@ static irqreturn_t bmp280_trigger_handler(int irq, void *p)
}
t_fine = bmp280_calc_t_fine(data, adc_temp);
+ comp_press = bmp280_compensate_press(data, adc_press, t_fine);
- data->sensor_data[0] = bmp280_compensate_press(data, adc_press, t_fine);
+ chans[0] = comp_press;
+ chans[1] = comp_temp;
- iio_push_to_buffers_with_timestamp(indio_dev, &data->sensor_data,
+ iio_push_to_buffers_with_timestamp(indio_dev, data->sensor_data,
iio_get_time_ns(indio_dev));
out:
@@ -1138,8 +1141,9 @@ static irqreturn_t bme280_trigger_handler(int irq, void *p)
struct iio_poll_func *pf = p;
struct iio_dev *indio_dev = pf->indio_dev;
struct bmp280_data *data = iio_priv(indio_dev);
- u32 adc_temp, adc_press, adc_humidity;
- s32 t_fine;
+ u32 adc_temp, adc_press, adc_humidity, comp_press, comp_humidity;
+ s32 t_fine, comp_temp;
+ s32 *chans = (s32 *)data->sensor_data;
int ret;
guard(mutex)(&data->lock);
@@ -1159,7 +1163,7 @@ static irqreturn_t bme280_trigger_handler(int irq, void *p)
goto out;
}
- data->sensor_data[1] = bmp280_compensate_temp(data, adc_temp);
+ comp_temp = bmp280_compensate_temp(data, adc_temp);
/* Pressure calculations */
adc_press = FIELD_GET(BMP280_MEAS_TRIM_MASK, get_unaligned_be24(&data->buf[0]));
@@ -1169,8 +1173,7 @@ static irqreturn_t bme280_trigger_handler(int irq, void *p)
}
t_fine = bmp280_calc_t_fine(data, adc_temp);
-
- data->sensor_data[0] = bmp280_compensate_press(data, adc_press, t_fine);
+ comp_press = bmp280_compensate_press(data, adc_press, t_fine);
/* Humidity calculations */
adc_humidity = get_unaligned_be16(&data->buf[6]);
@@ -1179,9 +1182,14 @@ static irqreturn_t bme280_trigger_handler(int irq, void *p)
dev_err(data->dev, "reading humidity skipped\n");
goto out;
}
- data->sensor_data[2] = bme280_compensate_humidity(data, adc_humidity, t_fine);
- iio_push_to_buffers_with_timestamp(indio_dev, &data->sensor_data,
+ comp_humidity = bme280_compensate_humidity(data, adc_humidity, t_fine);
+
+ chans[0] = comp_press;
+ chans[1] = comp_temp;
+ chans[2] = comp_humidity;
+
+ iio_push_to_buffers_with_timestamp(indio_dev, data->sensor_data,
iio_get_time_ns(indio_dev));
out:
@@ -1618,8 +1626,9 @@ static irqreturn_t bmp380_trigger_handler(int irq, void *p)
struct iio_poll_func *pf = p;
struct iio_dev *indio_dev = pf->indio_dev;
struct bmp280_data *data = iio_priv(indio_dev);
- u32 adc_temp, adc_press;
- s32 t_fine;
+ u32 adc_temp, adc_press, comp_press;
+ s32 t_fine, comp_temp;
+ s32 *chans = (s32 *)data->sensor_data;
int ret;
guard(mutex)(&data->lock);
@@ -1639,7 +1648,7 @@ static irqreturn_t bmp380_trigger_handler(int irq, void *p)
goto out;
}
- data->sensor_data[1] = bmp380_compensate_temp(data, adc_temp);
+ comp_temp = bmp380_compensate_temp(data, adc_temp);
/* Pressure calculations */
adc_press = get_unaligned_le24(&data->buf[0]);
@@ -1649,10 +1658,12 @@ static irqreturn_t bmp380_trigger_handler(int irq, void *p)
}
t_fine = bmp380_calc_t_fine(data, adc_temp);
+ comp_press = bmp380_compensate_press(data, adc_press, t_fine);
- data->sensor_data[0] = bmp380_compensate_press(data, adc_press, t_fine);
+ chans[0] = comp_press;
+ chans[1] = comp_temp;
- iio_push_to_buffers_with_timestamp(indio_dev, &data->sensor_data,
+ iio_push_to_buffers_with_timestamp(indio_dev, data->sensor_data,
iio_get_time_ns(indio_dev));
out:
@@ -2199,7 +2210,7 @@ static irqreturn_t bmp580_trigger_handler(int irq, void *p)
struct iio_poll_func *pf = p;
struct iio_dev *indio_dev = pf->indio_dev;
struct bmp280_data *data = iio_priv(indio_dev);
- int ret;
+ int ret, offset;
guard(mutex)(&data->lock);
@@ -2211,13 +2222,15 @@ static irqreturn_t bmp580_trigger_handler(int irq, void *p)
goto out;
}
- /* Temperature calculations */
- memcpy(&data->sensor_data[1], &data->buf[0], 3);
-
/* Pressure calculations */
- memcpy(&data->sensor_data[0], &data->buf[3], 3);
+ memcpy(&data->sensor_data[offset], &data->buf[3], 3);
+
+ offset += sizeof(s32);
+
+ /* Temperature calculations */
+ memcpy(&data->sensor_data[offset], &data->buf[0], 3);
- iio_push_to_buffers_with_timestamp(indio_dev, &data->sensor_data,
+ iio_push_to_buffers_with_timestamp(indio_dev, data->sensor_data,
iio_get_time_ns(indio_dev));
out:
@@ -2523,23 +2536,24 @@ static irqreturn_t bmp180_trigger_handler(int irq, void *p)
struct iio_poll_func *pf = p;
struct iio_dev *indio_dev = pf->indio_dev;
struct bmp280_data *data = iio_priv(indio_dev);
- int ret, chan_value;
+ int ret, comp_temp, comp_press;
+ s32 *chans = (s32 *)data->sensor_data;
guard(mutex)(&data->lock);
- ret = bmp180_read_temp(data, &chan_value);
+ ret = bmp180_read_temp(data, &comp_temp);
if (ret)
goto out;
- data->sensor_data[1] = chan_value;
- ret = bmp180_read_press(data, &chan_value);
+ ret = bmp180_read_press(data, &comp_press);
if (ret)
goto out;
- data->sensor_data[0] = chan_value;
+ chans[0] = comp_press;
+ chans[1] = comp_temp;
- iio_push_to_buffers_with_timestamp(indio_dev, &data->sensor_data,
+ iio_push_to_buffers_with_timestamp(indio_dev, data->sensor_data,
iio_get_time_ns(indio_dev));
out:
diff --git a/drivers/iio/pressure/bmp280.h b/drivers/iio/pressure/bmp280.h
index a9f220c1f77a..dc1bf04cb0b5 100644
--- a/drivers/iio/pressure/bmp280.h
+++ b/drivers/iio/pressure/bmp280.h
@@ -322,6 +322,7 @@
BMP280_NUM_TEMP_BYTES + \
BME280_NUM_HUMIDITY_BYTES)
+#define BME280_NUM_MAX_CHANNELS 3
/* Core exported structs */
static const char *const bmp280_supply_names[] = {
@@ -419,7 +420,8 @@ struct bmp280_data {
* Data to push to userspace triggered buffer. Up to 3 channels and
* s64 timestamp, aligned.
*/
- s32 sensor_data[6] __aligned(8);
+ u8 sensor_data[ALIGN(sizeof(s32) * BME280_NUM_MAX_CHANNELS, sizeof(s64))
+ + sizeof(s64)] __aligned(sizeof(s64));
/*
* DMA (thus cache coherency maintenance) may require the
--
2.25.1
next prev parent reply other threads:[~2024-09-30 20:24 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-09-30 20:23 [PATCH v3 0/2] pressure: bmp280: Improve pushing of data to buffer Vasileios Amoiridis
2024-09-30 20:23 ` [PATCH v3 1/2] iio: pressure: bmp280: Use unsigned type for raw values Vasileios Amoiridis
2024-09-30 20:23 ` Vasileios Amoiridis [this message]
2024-10-11 18:59 ` [PATCH v3 2/2] iio: pressure: bmp280: Use char instead of s32 for data buffer Kees Bakker
2024-10-06 14:05 ` [PATCH v3 0/2] pressure: bmp280: Improve pushing of data to buffer Jonathan Cameron
2024-10-07 19:35 ` Vasileios Amoiridis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240930202353.38203-3-vassilisamir@gmail.com \
--to=vassilisamir@gmail.com \
--cc=dan.carpenter@linaro.org \
--cc=jic23@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).