From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@kernel.org>
To: linux-iio@vger.kernel.org
Cc: Cosmin Tanislav <cosmin.tanislav@analog.com>,
Lars-Peter Clausen <lars@metafoo.de>,
Michael Hennerich <Michael.Hennerich@analog.com>,
Jonathan Cameron <jic23@kernel.org>
Subject: [PATCH 1/3] iio: addac: ad74413r: drop reset_gpio from struct ad74413r_state
Date: Wed, 16 Oct 2024 16:21:59 +0200 [thread overview]
Message-ID: <20241016-dev-ad74413r-minor-improv-v1-1-13c9c769237d@analog.com> (raw)
In-Reply-To: <20241016-dev-ad74413r-minor-improv-v1-0-13c9c769237d@analog.com>
From: Nuno Sa <nuno.sa@analog.com>
We just need the reset gpio during probe so there's no need to keep it
in our state struct. Hence, move devm_gpiod_get_optional() into
ad74413r_reset() and use a local struct gpio_desc.
While at it, request the gpio in the asserted state (GPIOD_OUT_HIGH) so
that we already perform the reset while requesting the gpio saving us a
call to gpiod_set_value_cansleep().
Also, explicitly include <gpio/consumer.h> for
devm_gpiod_get_optional().
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
---
drivers/iio/addac/ad74413r.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/iio/addac/ad74413r.c b/drivers/iio/addac/ad74413r.c
index e50c896a07668..550e2460e29ca 100644
--- a/drivers/iio/addac/ad74413r.c
+++ b/drivers/iio/addac/ad74413r.c
@@ -9,6 +9,7 @@
#include <linux/crc8.h>
#include <linux/device.h>
#include <linux/err.h>
+#include <linux/gpio/consumer.h>
#include <linux/gpio/driver.h>
#include <linux/iio/buffer.h>
#include <linux/iio/iio.h>
@@ -72,7 +73,6 @@ struct ad74413r_state {
struct regmap *regmap;
struct device *dev;
struct iio_trigger *trig;
- struct gpio_desc *reset_gpio;
size_t adc_active_channels;
struct spi_message adc_samples_msg;
@@ -407,12 +407,16 @@ static int ad74413r_gpio_set_comp_config(struct gpio_chip *chip,
static int ad74413r_reset(struct ad74413r_state *st)
{
+ struct gpio_desc *reset_gpio;
int ret;
- if (st->reset_gpio) {
- gpiod_set_value_cansleep(st->reset_gpio, 1);
+ reset_gpio = devm_gpiod_get_optional(st->dev, "reset", GPIOD_OUT_HIGH);
+ if (IS_ERR(reset_gpio))
+ return PTR_ERR(reset_gpio);
+
+ if (reset_gpio) {
fsleep(50);
- gpiod_set_value_cansleep(st->reset_gpio, 0);
+ gpiod_set_value_cansleep(reset_gpio, 0);
return 0;
}
@@ -1378,10 +1382,6 @@ static int ad74413r_probe(struct spi_device *spi)
if (IS_ERR(st->regmap))
return PTR_ERR(st->regmap);
- st->reset_gpio = devm_gpiod_get_optional(st->dev, "reset", GPIOD_OUT_LOW);
- if (IS_ERR(st->reset_gpio))
- return PTR_ERR(st->reset_gpio);
-
st->refin_reg = devm_regulator_get(st->dev, "refin");
if (IS_ERR(st->refin_reg))
return dev_err_probe(st->dev, PTR_ERR(st->refin_reg),
--
2.46.1
next prev parent reply other threads:[~2024-10-16 14:22 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-16 14:21 [PATCH 0/3] iio: addac: ad74413r: minor improvements Nuno Sa via B4 Relay
2024-10-16 14:21 ` Nuno Sa via B4 Relay [this message]
2024-10-16 14:22 ` [PATCH 2/3] iio: addac: ad74413r: use devm_regulator_get_enable_read_voltage() Nuno Sa via B4 Relay
2024-10-16 14:22 ` [PATCH 3/3] iio: addac: ad74413r: simplify with cleanup.h Nuno Sa via B4 Relay
2024-10-19 14:41 ` [PATCH 0/3] iio: addac: ad74413r: minor improvements Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241016-dev-ad74413r-minor-improv-v1-1-13c9c769237d@analog.com \
--to=devnull+nuno.sa.analog.com@kernel.org \
--cc=Michael.Hennerich@analog.com \
--cc=cosmin.tanislav@analog.com \
--cc=jic23@kernel.org \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=nuno.sa@analog.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).