Linux IIO development
 help / color / mirror / Atom feed
From: Vasileios Amoiridis <vassilisamir@gmail.com>
To: jic23@kernel.org, lars@metafoo.de, robh@kernel.org,
	krzk+dt@kernel.org, conor+dt@kernel.org,
	andriy.shevchenko@linux.intel.com
Cc: vassilisamir@gmail.com, anshulusr@gmail.com,
	gustavograzs@gmail.com, linux-iio@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v3 1/7] iio: chemical: bme680: refactorize set_mode() mode
Date: Sat,  2 Nov 2024 14:13:05 +0100	[thread overview]
Message-ID: <20241102131311.36210-2-vassilisamir@gmail.com> (raw)
In-Reply-To: <20241102131311.36210-1-vassilisamir@gmail.com>

Refactorize the set_mode() function to use an external enum that
describes the possible modes of the BME680 device instead of using
true/false variables for selecting SLEEPING/FORCED mode.

Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
---
 drivers/iio/chemical/bme680.h      |  2 --
 drivers/iio/chemical/bme680_core.c | 31 ++++++++++++++----------------
 2 files changed, 14 insertions(+), 19 deletions(-)

diff --git a/drivers/iio/chemical/bme680.h b/drivers/iio/chemical/bme680.h
index f5be4516dde7..77136b55e7f6 100644
--- a/drivers/iio/chemical/bme680.h
+++ b/drivers/iio/chemical/bme680.h
@@ -27,8 +27,6 @@
 #define   BME680_OSRS_TEMP_MASK			GENMASK(7, 5)
 #define   BME680_OSRS_PRESS_MASK		GENMASK(4, 2)
 #define   BME680_MODE_MASK			GENMASK(1, 0)
-#define     BME680_MODE_FORCED			1
-#define     BME680_MODE_SLEEP			0
 
 #define BME680_REG_CONFIG			0x75
 #define   BME680_FILTER_MASK			GENMASK(4, 2)
diff --git a/drivers/iio/chemical/bme680_core.c b/drivers/iio/chemical/bme680_core.c
index 6d11f9188367..5c2c327c4540 100644
--- a/drivers/iio/chemical/bme680_core.c
+++ b/drivers/iio/chemical/bme680_core.c
@@ -95,6 +95,12 @@ struct bme680_calib {
 	s8  range_sw_err;
 };
 
+/* values of CTRL_MEAS register */
+enum bme680_op_mode {
+	BME680_MODE_SLEEP = 0,
+	BME680_MODE_FORCED = 1,
+};
+
 struct bme680_data {
 	struct regmap *regmap;
 	struct bme680_calib bme680;
@@ -502,23 +508,16 @@ static u8 bme680_calc_heater_dur(u16 dur)
 	return durval;
 }
 
-static int bme680_set_mode(struct bme680_data *data, bool mode)
+static int bme680_set_mode(struct bme680_data *data, enum bme680_op_mode mode)
 {
 	struct device *dev = regmap_get_device(data->regmap);
 	int ret;
 
-	if (mode) {
-		ret = regmap_write_bits(data->regmap, BME680_REG_CTRL_MEAS,
-					BME680_MODE_MASK, BME680_MODE_FORCED);
-		if (ret < 0)
-			dev_err(dev, "failed to set forced mode\n");
-
-	} else {
-		ret = regmap_write_bits(data->regmap, BME680_REG_CTRL_MEAS,
-					BME680_MODE_MASK, BME680_MODE_SLEEP);
-		if (ret < 0)
-			dev_err(dev, "failed to set sleep mode\n");
-
+	ret = regmap_write_bits(data->regmap, BME680_REG_CTRL_MEAS,
+				BME680_MODE_MASK, mode);
+	if (ret < 0) {
+		dev_err(dev, "failed to set ctrl_meas register\n");
+		return ret;
 	}
 
 	return ret;
@@ -613,8 +612,7 @@ static int bme680_gas_config(struct bme680_data *data)
 	int ret;
 	u8 heatr_res, heatr_dur;
 
-	/* Go to sleep */
-	ret = bme680_set_mode(data, false);
+	ret = bme680_set_mode(data, BME680_MODE_SLEEP);
 	if (ret < 0)
 		return ret;
 
@@ -745,8 +743,7 @@ static int bme680_read_raw(struct iio_dev *indio_dev,
 
 	guard(mutex)(&data->lock);
 
-	/* set forced mode to trigger measurement */
-	ret = bme680_set_mode(data, true);
+	ret = bme680_set_mode(data, BME680_MODE_FORCED);
 	if (ret < 0)
 		return ret;
 
-- 
2.43.0


  reply	other threads:[~2024-11-02 13:13 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-11-02 13:13 [PATCH v3 0/7]: iio: chemical: bme680: 2nd round of cleanup Vasileios Amoiridis
2024-11-02 13:13 ` Vasileios Amoiridis [this message]
2024-11-02 15:21   ` [PATCH v3 1/7] iio: chemical: bme680: refactorize set_mode() mode Jonathan Cameron
2024-11-02 13:13 ` [PATCH v3 2/7] iio: chemical: bme680: Add SCALE and RAW channels Vasileios Amoiridis
2024-11-02 15:21   ` Jonathan Cameron
2024-11-02 13:13 ` [PATCH v3 3/7] iio: chemical: bme680: Add triggered buffer support Vasileios Amoiridis
2024-11-02 15:24   ` Jonathan Cameron
2024-11-02 13:13 ` [PATCH v3 4/7] iio: chemical: bme680: Add support for preheat current Vasileios Amoiridis
2024-11-02 15:26   ` Jonathan Cameron
2024-11-02 13:13 ` [PATCH v3 5/7] dt-bindings: iio: bosch,bme680: Add supply properties Vasileios Amoiridis
2024-11-02 15:33   ` Jonathan Cameron
2024-11-03  9:46     ` Krzysztof Kozlowski
2024-11-04 16:10       ` Rob Herring
2024-11-11 18:48         ` Vasileios Amoiridis
2024-11-19 14:04           ` Rob Herring
2024-11-02 13:13 ` [PATCH v3 6/7] iio: chemical: bme680: add regulators Vasileios Amoiridis
2024-11-02 13:13 ` [PATCH v3 7/7] iio: chemical: bme680: add power management Vasileios Amoiridis
2024-11-02 15:35   ` Jonathan Cameron
2024-11-03 14:57     ` Vasileios Amoiridis

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20241102131311.36210-2-vassilisamir@gmail.com \
    --to=vassilisamir@gmail.com \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=anshulusr@gmail.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gustavograzs@gmail.com \
    --cc=jic23@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox