From: Jonathan Cameron <jic23@kernel.org>
To: gregkh@linuxfoundation.org, linux-iio@vger.kernel.org
Subject: [PULL] IIO: 2nd set of new device support, features and cleanup for 6.13
Date: Sat, 9 Nov 2024 11:18:45 +0000 [thread overview]
Message-ID: <20241109111845.31155f91@jic23-huawei> (raw)
The following changes since commit 9365f0de4303f82ed4c2db1c39d3de824b249d80:
Merge 6.12-rc6 into char-misc-next (2024-11-05 09:36:29 +0100)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-6.13b
for you to fetch changes up to 20fd1383cd616d61b2a79967da1221dc6cfb8430:
iio: Move __private marking before struct element priv in struct iio_dev (2024-11-09 10:42:13 +0000)
----------------------------------------------------------------
IIO: 2nd set of new device support, features and cleanup for 6.13
Alongside new drivers and device support there are several large
cleanups going on across the IIO tree and we see part of some of those
in this pull request.
Merged char-misc-next at point of 6.12-rc6 merge to avoid a
conflict with a fix for the ad7380 merged earlier this cycle.
Note that I previously messed this merge up and had to reconstruct
it this morning so a coherent pull request was possible. The new
stuff is all the same as has been in linux-next for some time with
the exception of the kernel-doc related __private ordering fix
that went in yesterday.
New device support
==================
adi,ad7380
- Support for adaq4370-4 and adaq4370 quad channel ADCs.
adi,ad7606
- Various cleanups preceeding support of AD7607, AD7608 and AD7609 ADCs.
adi,ad7779
- New driver supproting AD7770, AD7771 and AD7779 ADCs.
allegro,als31300
- New driver for this 3D Linear Hall Effect sensor.
bosch,bmi270
- Add support BMI260 which is similar but requires a different firmware image.
bosch,smi240
- New driver for this IMU.
ti,opt3001
- Add support opt3002 light sensor which has a wider spectral range than
the opt3001.
vishay,veml3235
- New driver for this ambient light sensor.
Features
========
hid-sensors
- Add support Human Proximity Range and Attention detection (requiring
a new classification style channel type)
adi,ad3552r
- Add backend support and related platform driver to support use
with an FPGA IP to allow QSPI + DDR bus operation and much higher
data aquisition rates. (various rework preceeded this feature)
adi,ad7606
- Various cleanup prior to enabling use with an IIO Backend and PWM trigger
enabling much higher speed data capture.
bosch,bme680
- Support control of preheat current
- Support triggered buffer capture
- Add SCALE and RAW channels (needed to enable the buffered capture).
bosch,bmp280
- Enable sleeping to save power.
- Add interrupt support for bmp3xx and bmp5xx devices. Also update bmp085
to new approach.
- Enable data ready trigger.
bosch,bmi270
- Add triggered buffer support
- Add scale and sampling frequency control.
vishay,veml6070
- Support integration time via DT binding for an external resistor value.
Cleanup and minor fixes
=======================
core
- Fix a longstanding issue with event codes for differential channels.
Note that not all drivers are yet fixed, but macros have been added
to avoid potential repeats of this in future.
- Tidy up handling in iio_read_acpi_mount matrix.
- Mark iio_dev::priv with __private. Later move the marking before the
field name to avoid a kernel-doc issue.
treewide
- Drop some pointless default n entries in Kconfig.
- Add an iio_get_acpi_device_name_and_data() handler to replace some
commonly repeated code.
- simplify use of 'state' in write_event_config() callback as it is
effectively a boolean. Once done make it a boolean (lots of drivers
were updated to enable this)
- some more use of devm_regulator_get_enable_read_voltage( to replace
open coded versions. Where this enables it convert all of remove
handling to devm based and drop the remove callback.
- check returns from devm_mutex_init()
accel drivers
- Use aligned_s64 instead of s64 __aligned(8)
adi,ad5791
- Add some missing GPIOs and power supplies that presumably were always
hard wired on previous boards.
- Refactor to use chip_info in device id tables.
- Convert probe entirely to devm based simplify code and allowing remove()
callback to be dropped.
adi,ad7192
- Check return from spi_get_device_match_data()
adi,ad74413r
- Don't keep an unnecessary copy of the gpio after probe.
- Use devm_regulator_get_enable_read_voltage() instead of open coding.
- Apply cleanup.h approach to reduce complexity.
adi,dac8460
- Fix a wrong compaitble ID due to a stray space.
- Add an spi_device_id table.
bosch,bmc150
- Drop some likely false ACPI IDs.
- Drop left over unused ACPI specific code.
bosch,bme680
- Add mising regmap.h include.
- Reduce excessive sleep on startup.
- Drop some cammelcase usage.
- Use fsleep
- Generalize read functions to allow for reuse.
- Use s16 variable to avoid some incorrect casting
bosch,bmg150
- Drop some likely false ACPI IDs.
bosch,bmi270
- Drop unused FREQUENCY and SCALE attributes that always returned an
error (they wil be back impelmented correctly).
- Factor out the chip specific data into a structure to enable simple
support for additional devices.
isil,isl29018
- Drop ACPI_PTR() and CONFIG_ACPI guards as not worth the trouble for very
minor saving.
invensense,mpu6050
- Use much simpler test for ACPI firmware.
kionix,kxcjk-1013
- Drop unnecessary ACPI entry in the i2c_device_id table.
- Drop support KX022-1020 to fix a bug that was introduced with that change.
Hopefully a fixed version will replace it soon.
- Drop CONFIG guards for PM in favor of pm_ptr() and the compiler removing
dead code.
- Switch from enum to chip_info structure and add ODR times to that structure.
- Deduplicate one of those ODR structures
- Drop ACPI_PTR() and move ID table out of config guards.
- Minor additional cleanup.
liteon,ltr401
- Drop some likely false ACPI Ids and add LTER0303 which is know to be in use.
microchip,pac1934
- Use much simpler test for ACPI firmware.
vishay,veml6070
- Use unsigned int instead of just unsigned.
- Use FIELD_PREP to make setting of field value explicit.
Various other minor fixes to documentation
----------------------------------------------------------------
Alexandru Ardelean (5):
iio: adc: ad7606: fix/persist oversampling_ratio setting
iio: adc: ad7606: use realbits for sign-extending in scan_direct
iio: adc: ad7606: rework scale-available to be static
dt-bindings: iio: adc: adi,ad7606: document AD760{7,8,9} parts
iio: adc: ad7606: add support for AD760{7,8,9} parts
Andy Shevchenko (32):
iio: gyro: bmg160: Drop most likely fake ACPI IDs
iio: magnetometer: bmc150_magn: Drop most likely fake ACPI IDs
iio: light: Remove "default n" entries
iio: adc: Remove "default n" entries
iio: magnetometer: bmc150: Drop dead code from the driver
iio: adc: pac1934: Replace strange way of checking type of enumeration
iio: imu: inv_mpu6050: Replace strange way of checking type of enumeration
iio: acpi: Improve iio_read_acpi_mount_matrix()
iio: acpi: Add iio_get_acpi_device_name_and_data() helper function
iio: accel: kxcjk-1013: Remove redundant I²C ID
iio: accel: kxcjk-1013: Revert "Add support for KX022-1020"
iio: accel: kxcjk-1013: Switch from CONFIG_PM guards to pm_ptr() etc
iio: accel: kxcjk-1013: Use local variable for regs
iio: accel: kxcjk-1013: Rename kxcjk1013_info
iio: accel: kxcjk-1013: Start using chip_info variables instead of enum
iio: accel: kxcjk-1013: Move odr_start_up_times up in the code
iio: accel: kxcjk-1013: Convert ODR times array to variable in chip_info
iio: accel: kxcjk-1013: Get rid of enum kx_chipset
iio: accel: kxcjk-1013: Replace a variant of iio_get_acpi_device_name_and_data()
iio: accel: kxcjk-1013: drop ACPI_PTR() and move ID out of CONFIG_ACPI guards
iio: accel: mma9551: Replace custom implementation of iio_get_acpi_device_name()
iio: accel: mma9553: Replace custom implementation of iio_get_acpi_device_name()
iio: gyro: bmg160: Replace custom implementation of iio_get_acpi_device_name()
iio: light: isl29018: Replace a variant of iio_get_acpi_device_name_and_data()
iio: light: isl29018: drop ACPI_PTR() and CONFIG_ACPI guards
iio: light: ltr501: Drop most likely fake ACPI IDs
iio: light: ltr501: Add LTER0303 to the supported devices
iio: light: ltr501: Replace a variant of iio_get_acpi_device_name_and_data()
iio: adc: ad4000: Check for error code from devm_mutex_init() call
iio: adc: pac1921: Check for error code from devm_mutex_init() call
iio: accel: kxcjk-1013: Deduplicate ODR startup time array
iio: Mark iio_dev::priv member with __private
Angelo Dureghello (8):
dt-bindings: iio: dac: ad3552r: add iio backend support
dt-bindings: iio: dac: adi-axi-dac: add ad3552r axi variant
iio: backend: extend features
iio: dac: adi-axi-dac: extend features
iio: dac: ad3552r: changes to use FIELD_PREP
iio: dac: ad3552r: extract common code (no changes in behavior intended)
iio: dac: ad3552r: add high-speed platform driver
iio: dac: adi-axi-dac: add registering of child fdt node
Axel Haslam (6):
dt-bindings: iio: dac: ad5791: Add optional reset, clr and ldac gpios
dt-bindings: iio: dac: ad5791: Add required voltage supplies
iio: dac: ad5791: Include chip_info in device match tables
iio: dac: ad5791: Add reset, clr and ldac gpios
iio: dac: ad5791: Use devm_regulator_get_enable_read_voltage
iio: dac: ad5791: Use devm_iio_device_register
David Lechner (16):
iio: dac: ad8460: fix DT compatible
iio: dac: ad8460: add SPI device match table
iio: dac: ad5380: use devm_regulator_get_enable_read_voltage()
iio: dac: ad5380: drop driver remove callbacks
iio: dac: ad5446: use devm_regulator_get_enable_read_voltage()
iio: dac: ad5446: drop driver remove callbacks
iio: dac: ad5504: use devm_regulator_get_enable_read_voltage()
iio: dac: ad5504: drop driver remove callback
iio: dac: ad5624r: use devm_regulator_get_enable_read_voltage()
iio: dac: ad5624r: drop driver remove callback
iio: dac: ad5761: use devm_regulator_get_enable_read_voltage()
iio: dac: ad5761: drop driver remove callback
iio: dac: ad5770r: use devm_regulator_get_enable_read_voltage()
iio: dummy: use specialized event code macros
iio: accel: mma9553: use specialized event code macros
iio: events: make IIO_EVENT_CODE macro private
Emil Gedenryd (2):
dt-bindings: iio: light: opt3001: add compatible for opt3002
iio: light: opt3001: add support for TI's opt3002 light sensor
Guillaume Stols (8):
dt-bindings: iio: adc: ad7606: Remove spi-cpha from required
dt-bindings: iio: adc: ad7606: Add iio backend bindings
Documentation: iio: Document ad7606 driver
iio: adc: ad7606: Add PWM support for conversion trigger
iio: adc: ad7606: Add compatibility to fw_nodes
iio: adc: ad7606: Introduce num_adc_channels
iio: adc: ad7606: Add iio-backend support
iio: adc: ad7606: Disable PWM usage for non backend version
Javier Carrasco (6):
iio: light: veml6070: use unsigned int instead of unsigned
iio: light: veml6070: use field to set integration time
dt-bindings: iio: light: veml6030: add veml3235
iio: light: add support for veml3235
dt-bindings: iio: light: veml6075: document vishay,rset-ohms
iio: light: veml6070: add support for integration time
Jonathan Cameron (3):
iio: accel: replace s64 __aligned(8) with aligned_s64
Merge commit '9365f0de4303f82ed4c2db1c39d3de824b249d80' into HEAD
iio: Move __private marking before struct element priv in struct iio_dev
Julien Stephan (28):
iio: light: bh1745: simplify code in write_event_config callback
iio: light: ltr501: simplify code in write_event_config callback
iio: light: veml6030: simplify code in write_event_config callback
iio: imu: inv_mpu6050: simplify code in write_event_config callback
iio: light: stk3310: simplify code in write_event_config callback
iio: gyro: bmg160_core: remove trailing tab
iio: light: ltr390: simplify code in write_event_config callback
iio: proximity: hx9023s: simplify code in write_event_config callback
iio: light: tsl2772: simplify code in write_event_config callback
iio: proximity: irsd200: simplify code in write_event_config callback
iio: proximity: sx9500: simplify code in write_event_config callback
iio: light: adux1020: write_event_config: use local variable for interrupt value
iio: fix write_event_config signature
iio: accel: mma9551: use bool for event state
iio: accel: sca3000: use bool for event state
iio: imu: bmi323: use bool for event state
iio: imu: st_lsm6dsx: use bool for event state
iio: light: apds9300: use bool for event state
iio: light: apds9306: simplifies if branch in apds9306_write_event_config
iio: light: apds9960: convert als_int and pxs_int to bool
iio: light: apds9960: remove useless return
iio: events.h: add event identifier macros for differential channel
iio: adc: ad7280a: use IIO_DIFF_EVENT_CODE macro helper
dt-bindings: iio: adc: ad7380: add adaq4370-4 and adaq4380-4 compatible parts
iio: adc: ad7380: fix oversampling formula
iio: adc: ad7380: use local dev variable to shorten long lines
iio: adc: ad7380: add support for adaq4370-4 and adaq4380-4
docs: iio: ad7380: add adaq4370-4 and adaq4380-4
Justin Weiss (6):
iio: imu: bmi270: Remove unused FREQUENCY / SCALE attributes
iio: imu: bmi270: Provide chip info as configuration structure
iio: imu: bmi270: Add triggered buffer for Bosch BMI270 IMU
iio: imu: bmi270: Add scale and sampling frequency to BMI270 IMU
dt-bindings: iio: imu: bmi270: Add Bosch BMI260
iio: imu: bmi270: Add support for BMI260
Neil Armstrong (3):
dt-bindings: vendor-prefixes: Add Allegro MicroSystems, Inc
dt-bindings: iio: magnetometer: document the Allegro MicroSystems ALS31300 3-D Linear Hall Effect Sensor
iio: magnetometer: add Allegro MicroSystems ALS31300 3-D Linear Hall Effect driver
Nuno Sa (4):
iio: adc: ad7192: properly check spi_get_device_match_data()
iio: addac: ad74413r: drop reset_gpio from struct ad74413r_state
iio: addac: ad74413r: use devm_regulator_get_enable_read_voltage()
iio: addac: ad74413r: simplify with cleanup.h
Ramona Alexandra Nechita (3):
dt-bindings: iio: adc: add ad7779 doc
Documentation: ABI: added filter mode doc in sysfs-bus-iio
drivers: iio: adc: add support for ad777x family
Ricardo Ribalda (5):
iio: hid-sensors: Add proximity and attention IDs
iio: hid-sensors-prox: Factor-in hid_sensor_push_data
iio: Add channel type for attention
iio: hid-sensors-prox: Make proximity channel indexed
iio: hid-sensor-prox: Add support for more channels
Shen Jianping (2):
dt-bindings: iio: imu: smi240: add Bosch smi240
iio: imu: smi240: add driver
Vasileios Amoiridis (15):
iio: pressure: bmp280: Use sleep and forced mode for oneshot captures
dt-bindings: iio: pressure: bmp085: Add interrupts for BMP3xx and BMP5xx devices
iio: pressure: bmp280: Add data ready trigger support
iio: pressure: bmp280: Move bmp085 interrupt to new configuration
iio: chemical: bme680: Add missing regmap.h include
iio: chemical: bme680: optimize startup time
iio: chemical: bme680: avoid using camel case
iio: chemical: bme680: move to fsleep()
iio: chemical: bme680: Fix indentation and unnecessary spaces
iio: chemical: bme680: generalize read_*() functions
iio: chemical: bme680: use s16 variable for temp value to avoid casting
iio: chemical: bme680: refactorize set_mode() mode
iio: chemical: bme680: Add SCALE and RAW channels
iio: chemical: bme680: Add triggered buffer support
iio: chemical: bme680: Add support for preheat current
WangYuli (1):
iio: accel: adxl355: Fix typo "accelaration"
Yo-Jung (Leo) Lin (1):
iio: gyro: list adis16137 in Kconfig description
Documentation/ABI/testing/sysfs-bus-iio | 32 +
Documentation/ABI/testing/sysfs-bus-iio-adc-ad4130 | 46 --
.../devicetree/bindings/iio/adc/adi,ad7380.yaml | 120 +++
.../devicetree/bindings/iio/adc/adi,ad7606.yaml | 81 +-
.../devicetree/bindings/iio/adc/adi,ad7779.yaml | 110 +++
.../devicetree/bindings/iio/dac/adi,ad3552r.yaml | 7 +
.../devicetree/bindings/iio/dac/adi,ad5791.yaml | 39 +
.../devicetree/bindings/iio/dac/adi,axi-dac.yaml | 69 +-
.../devicetree/bindings/iio/imu/bosch,bmi270.yaml | 4 +-
.../devicetree/bindings/iio/imu/bosch,smi240.yaml | 51 ++
.../devicetree/bindings/iio/light/ti,opt3001.yaml | 4 +-
.../bindings/iio/light/vishay,veml6030.yaml | 5 +-
.../bindings/iio/light/vishay,veml6075.yaml | 18 +
.../iio/magnetometer/allegromicro,als31300.yaml | 46 ++
.../devicetree/bindings/iio/pressure/bmp085.yaml | 22 +-
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
Documentation/iio/ad7380.rst | 16 +
Documentation/iio/ad7606.rst | 144 ++++
Documentation/iio/index.rst | 1 +
MAINTAINERS | 8 +-
drivers/iio/accel/adxl355_core.c | 2 +-
drivers/iio/accel/adxl367.c | 2 +-
drivers/iio/accel/adxl372.c | 2 +-
drivers/iio/accel/adxl380.c | 2 +-
drivers/iio/accel/bma180.c | 3 +-
drivers/iio/accel/bma220_spi.c | 1 +
drivers/iio/accel/bma400_core.c | 4 +-
drivers/iio/accel/bmc150-accel-core.c | 2 +-
drivers/iio/accel/bmc150-accel.h | 3 +-
drivers/iio/accel/fxls8962af-core.c | 5 +-
drivers/iio/accel/kionix-kx022a.c | 3 +-
drivers/iio/accel/kxcjk-1013.c | 442 +++++-----
drivers/iio/accel/kxsd9.c | 3 +-
drivers/iio/accel/mma7455_core.c | 3 +-
drivers/iio/accel/mma8452.c | 5 +-
drivers/iio/accel/mma9551.c | 27 +-
drivers/iio/accel/mma9553.c | 46 +-
drivers/iio/accel/msa311.c | 3 +-
drivers/iio/accel/mxc4005.c | 3 +-
drivers/iio/accel/sca3000.c | 6 +-
drivers/iio/accel/stk8312.c | 3 +-
drivers/iio/accel/stk8ba50.c | 3 +-
drivers/iio/adc/Kconfig | 15 +-
drivers/iio/adc/Makefile | 1 +
drivers/iio/adc/ad4000.c | 4 +-
drivers/iio/adc/ad7091r-base.c | 3 +-
drivers/iio/adc/ad7192.c | 3 +
drivers/iio/adc/ad7280a.c | 14 +-
drivers/iio/adc/ad7291.c | 2 +-
drivers/iio/adc/ad7380.c | 178 +++-
drivers/iio/adc/ad7606.c | 797 +++++++++++++-----
drivers/iio/adc/ad7606.h | 60 +-
drivers/iio/adc/ad7606_par.c | 127 ++-
drivers/iio/adc/ad7606_spi.c | 138 +++-
drivers/iio/adc/ad7779.c | 914 +++++++++++++++++++++
drivers/iio/adc/ad799x.c | 2 +-
drivers/iio/adc/hi8435.c | 2 +-
drivers/iio/adc/max1363.c | 2 +-
drivers/iio/adc/pac1921.c | 7 +-
drivers/iio/adc/pac1934.c | 2 +-
drivers/iio/adc/palmas_gpadc.c | 2 +-
drivers/iio/adc/ti-ads1015.c | 2 +-
drivers/iio/adc/xilinx-ams.c | 2 +-
drivers/iio/adc/xilinx-xadc-events.c | 2 +-
drivers/iio/adc/xilinx-xadc.h | 2 +-
drivers/iio/addac/ad74413r.c | 81 +-
drivers/iio/cdc/ad7150.c | 2 +-
drivers/iio/chemical/Kconfig | 2 +
drivers/iio/chemical/bme680.h | 11 +-
drivers/iio/chemical/bme680_core.c | 366 +++++++--
drivers/iio/dac/Kconfig | 19 +
drivers/iio/dac/Makefile | 2 +
drivers/iio/dac/ad3552r-common.c | 249 ++++++
drivers/iio/dac/ad3552r-hs.c | 529 ++++++++++++
drivers/iio/dac/ad3552r-hs.h | 19 +
drivers/iio/dac/ad3552r.c | 557 ++-----------
drivers/iio/dac/ad3552r.h | 228 +++++
drivers/iio/dac/ad5380.c | 85 +-
drivers/iio/dac/ad5421.c | 2 +-
drivers/iio/dac/ad5446.c | 77 +-
drivers/iio/dac/ad5504.c | 59 +-
drivers/iio/dac/ad5624r.h | 1 -
drivers/iio/dac/ad5624r_spi.c | 71 +-
drivers/iio/dac/ad5761.c | 109 +--
drivers/iio/dac/ad5770r.c | 41 +-
drivers/iio/dac/ad5791.c | 203 +++--
drivers/iio/dac/ad8460.c | 11 +-
drivers/iio/dac/adi-axi-dac.c | 312 ++++++-
drivers/iio/dummy/iio_simple_dummy.h | 2 +-
drivers/iio/dummy/iio_simple_dummy_events.c | 32 +-
drivers/iio/gyro/Kconfig | 2 +-
drivers/iio/gyro/bmg160_core.c | 19 +-
drivers/iio/gyro/bmg160_i2c.c | 6 +-
drivers/iio/imu/Kconfig | 14 +
drivers/iio/imu/Makefile | 2 +
drivers/iio/imu/bmi270/Kconfig | 1 +
drivers/iio/imu/bmi270/bmi270.h | 21 +-
drivers/iio/imu/bmi270/bmi270_core.c | 441 +++++++++-
drivers/iio/imu/bmi270/bmi270_i2c.c | 20 +-
drivers/iio/imu/bmi270/bmi270_spi.c | 13 +-
drivers/iio/imu/bmi323/bmi323_core.c | 10 +-
drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c | 5 +-
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 9 +-
drivers/iio/imu/kmx61.c | 2 +-
drivers/iio/imu/smi240.c | 621 ++++++++++++++
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 4 +-
drivers/iio/industrialio-acpi.c | 48 +-
drivers/iio/industrialio-backend.c | 78 ++
drivers/iio/industrialio-core.c | 3 +-
drivers/iio/light/Kconfig | 14 +-
drivers/iio/light/Makefile | 1 +
drivers/iio/light/adux1020.c | 12 +-
drivers/iio/light/apds9300.c | 20 +-
drivers/iio/light/apds9306.c | 7 +-
drivers/iio/light/apds9960.c | 10 +-
drivers/iio/light/bh1745.c | 50 +-
drivers/iio/light/cm36651.c | 2 +-
drivers/iio/light/gp2ap002.c | 2 +-
drivers/iio/light/gp2ap020a00f.c | 2 +-
drivers/iio/light/hid-sensor-prox.c | 195 +++--
drivers/iio/light/iqs621-als.c | 2 +-
drivers/iio/light/isl29018.c | 38 +-
drivers/iio/light/ltr390.c | 7 +-
drivers/iio/light/ltr501.c | 35 +-
drivers/iio/light/max44009.c | 2 +-
drivers/iio/light/opt3001.c | 191 ++++-
drivers/iio/light/stk3310.c | 5 +-
drivers/iio/light/tcs3472.c | 2 +-
drivers/iio/light/tsl2563.c | 2 +-
drivers/iio/light/tsl2591.c | 2 +-
drivers/iio/light/tsl2772.c | 6 +-
drivers/iio/light/us5182d.c | 2 +-
drivers/iio/light/vcnl4000.c | 5 +-
drivers/iio/light/veml3235.c | 495 +++++++++++
drivers/iio/light/veml6030.c | 5 +-
drivers/iio/light/veml6070.c | 138 +++-
drivers/iio/magnetometer/Kconfig | 13 +
drivers/iio/magnetometer/Makefile | 1 +
drivers/iio/magnetometer/als31300.c | 494 +++++++++++
drivers/iio/magnetometer/bmc150_magn.c | 15 -
drivers/iio/magnetometer/bmc150_magn_i2c.c | 9 -
drivers/iio/magnetometer/bmc150_magn_spi.c | 9 -
drivers/iio/position/iqs624-pos.c | 2 +-
drivers/iio/pressure/bmp280-core.c | 536 +++++++++++-
drivers/iio/pressure/bmp280-i2c.c | 4 +-
drivers/iio/pressure/bmp280-spi.c | 4 +-
drivers/iio/pressure/bmp280.h | 43 +
drivers/iio/proximity/aw96103.c | 2 +-
drivers/iio/proximity/cros_ec_mkbp_proximity.c | 2 +-
drivers/iio/proximity/hx9023s.c | 4 +-
drivers/iio/proximity/irsd200.c | 5 +-
drivers/iio/proximity/sx9500.c | 6 +-
drivers/iio/proximity/sx_common.c | 2 +-
drivers/iio/proximity/sx_common.h | 2 +-
drivers/iio/proximity/vcnl3020.c | 2 +-
drivers/iio/temperature/mcp9600.c | 2 +-
drivers/iio/temperature/tmp007.c | 2 +-
include/linux/hid-sensor-ids.h | 2 +
include/linux/iio/backend.h | 17 +
include/linux/iio/events.h | 31 +-
include/linux/iio/iio.h | 16 +-
include/uapi/linux/iio/types.h | 1 +
tools/iio/iio_event_monitor.c | 2 +
163 files changed, 8327 insertions(+), 2221 deletions(-)
delete mode 100644 Documentation/ABI/testing/sysfs-bus-iio-adc-ad4130
create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7779.yaml
create mode 100644 Documentation/devicetree/bindings/iio/imu/bosch,smi240.yaml
create mode 100644 Documentation/devicetree/bindings/iio/magnetometer/allegromicro,als31300.yaml
create mode 100644 Documentation/iio/ad7606.rst
create mode 100644 drivers/iio/adc/ad7779.c
create mode 100644 drivers/iio/dac/ad3552r-common.c
create mode 100644 drivers/iio/dac/ad3552r-hs.c
create mode 100644 drivers/iio/dac/ad3552r-hs.h
create mode 100644 drivers/iio/dac/ad3552r.h
create mode 100644 drivers/iio/imu/smi240.c
create mode 100644 drivers/iio/light/veml3235.c
create mode 100644 drivers/iio/magnetometer/als31300.c
next reply other threads:[~2024-11-09 11:18 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-11-09 11:18 Jonathan Cameron [this message]
2024-11-09 13:40 ` [PULL] IIO: 2nd set of new device support, features and cleanup for 6.13 Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241109111845.31155f91@jic23-huawei \
--to=jic23@kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-iio@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox