Linux IIO development
 help / color / mirror / Atom feed
From: Jakob Hauser <jahau@rocketmail.com>
To: Jonathan Cameron <jic23@kernel.org>,
	Lars-Peter Clausen <lars@metafoo.de>
Cc: David Laight <david.laight@aculab.com>,
	Linus Walleij <linus.walleij@linaro.org>,
	linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org,
	Jakob Hauser <jahau@rocketmail.com>,
	kernel test robot <lkp@intel.com>
Subject: [PATCH] iio: magnetometer: yas530: Use signed integer type for clamp limits
Date: Wed, 27 Nov 2024 00:40:21 +0100	[thread overview]
Message-ID: <20241126234021.19749-1-jahau@rocketmail.com> (raw)
In-Reply-To: 20241126234021.19749-1-jahau.ref@rocketmail.com

In the function yas537_measure() there is a clamp_val() with limits of
-BIT(13) and  BIT(13) - 1. The input clamp value h[] is of type s32. The BIT()
is of type unsigned long integer due to its define in include/vdso/bits.h.
The lower limit -BIT(13) is recognized as -8192 but expressed as an unsigned
long integer. The size of an unsigned long integer differs between 32-bit and
64-bit architectures. Converting this to type s32 may lead to undesired
behavior.

Declaring a signed integer with a value of BIT(13) allows to use it more
specifically as a negative value on the lower clamp limit.

While at it, replace all BIT(13) in the function yas537_measure() by the signed
integer.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202411230458.dhZwh3TT-lkp@intel.com/
Fixes: 65f79b501030 ("iio: magnetometer: yas530: Add YAS537 variant")
Cc: David Laight <david.laight@aculab.com>
Signed-off-by: Jakob Hauser <jahau@rocketmail.com>
---
The patch is based on torvalds/linux v6.12.

The calculation lines h[0], h[1] and h[2] exceed the limit of 80 characters per
line. In terms of readability I would prefer to keep it that way.
---
 drivers/iio/magnetometer/yamaha-yas530.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/iio/magnetometer/yamaha-yas530.c b/drivers/iio/magnetometer/yamaha-yas530.c
index 65011a8598d3..938b35536e0d 100644
--- a/drivers/iio/magnetometer/yamaha-yas530.c
+++ b/drivers/iio/magnetometer/yamaha-yas530.c
@@ -372,6 +372,7 @@ static int yas537_measure(struct yas5xx *yas5xx, u16 *t, u16 *x, u16 *y1, u16 *y
 	u8 data[8];
 	u16 xy1y2[3];
 	s32 h[3], s[3];
+	int half_range = BIT(13);
 	int i, ret;
 
 	mutex_lock(&yas5xx->lock);
@@ -406,13 +407,13 @@ static int yas537_measure(struct yas5xx *yas5xx, u16 *t, u16 *x, u16 *y1, u16 *y
 	/* The second version of YAS537 needs to include calibration coefficients */
 	if (yas5xx->version == YAS537_VERSION_1) {
 		for (i = 0; i < 3; i++)
-			s[i] = xy1y2[i] - BIT(13);
-		h[0] = (c->k *   (128 * s[0] + c->a2 * s[1] + c->a3 * s[2])) / BIT(13);
-		h[1] = (c->k * (c->a4 * s[0] + c->a5 * s[1] + c->a6 * s[2])) / BIT(13);
-		h[2] = (c->k * (c->a7 * s[0] + c->a8 * s[1] + c->a9 * s[2])) / BIT(13);
+			s[i] = xy1y2[i] - half_range;
+		h[0] = (c->k *   (128 * s[0] + c->a2 * s[1] + c->a3 * s[2])) / half_range;
+		h[1] = (c->k * (c->a4 * s[0] + c->a5 * s[1] + c->a6 * s[2])) / half_range;
+		h[2] = (c->k * (c->a7 * s[0] + c->a8 * s[1] + c->a9 * s[2])) / half_range;
 		for (i = 0; i < 3; i++) {
-			clamp_val(h[i], -BIT(13), BIT(13) - 1);
-			xy1y2[i] = h[i] + BIT(13);
+			clamp_val(h[i], -half_range, half_range - 1);
+			xy1y2[i] = h[i] + half_range;
 		}
 	}
 
-- 
2.43.0


       reply	other threads:[~2024-11-27  0:00 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20241126234021.19749-1-jahau.ref@rocketmail.com>
2024-11-26 23:40 ` Jakob Hauser [this message]
2024-11-27  8:53   ` [PATCH] iio: magnetometer: yas530: Use signed integer type for clamp limits David Laight
2024-11-29  0:19     ` Jakob Hauser
2024-11-29  8:26       ` David Laight

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20241126234021.19749-1-jahau@rocketmail.com \
    --to=jahau@rocketmail.com \
    --cc=david.laight@aculab.com \
    --cc=jic23@kernel.org \
    --cc=lars@metafoo.de \
    --cc=linus.walleij@linaro.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lkp@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox