Re: [PATCH] iio: adc: ti-ads124s08: Use gpiod_set_value_cansleep()

[Jonathan Cameron <jic23@kernel.org>]

On Sat, 7 Dec 2024 20:34:30 +0200
Andy Shevchenko <andriy.shevchenko@intel.com> wrote:

> On Sun, Dec 01, 2024 at 01:03:56PM +0000, Jonathan Cameron wrote:
> > On Fri, 22 Nov 2024 13:43:08 -0300
> > Fabio Estevam <festevam@gmail.com> wrote:  
> > > Using gpiod_set_value() to control the reset GPIO causes some verbose
> > > warnings during boot when the reset GPIO is controlled by an I2C IO
> > > expander.
> > > 
> > > As the caller can sleep, use the gpiod_set_value_cansleep() variant to
> > > fix the issue.
> > > 
> > > Tested on a custom i.MX93 board with a ADS124S08 ADC.  
> 
> > Hmm. Could be considered a feature, but fair enough as the change is
> > trivial and you are setting it on a real board.
> > 
> > Applied to the fixes-togreg branch of iio.git.  
> 
> ...
> 
> > > @@ -183,9 +183,9 @@ static int ads124s_reset(struct iio_dev *indio_dev)
> > >  	struct ads124s_private *priv = iio_priv(indio_dev);
> > >  
> > >  	if (priv->reset_gpio) {
> > > -		gpiod_set_value(priv->reset_gpio, 0);
> > > +		gpiod_set_value_cansleep(priv->reset_gpio, 0);
> > >  		udelay(200);  
> 
> Obviously if you allow that change, you should switch to fsleep() here.
True, that would be a nice follow up tidying up.

Jonathan

> 
> > > -		gpiod_set_value(priv->reset_gpio, 1);
> > > +		gpiod_set_value_cansleep(priv->reset_gpio, 1);
> > >  	} else {
> > >  		return ads124s_write_cmd(indio_dev, ADS124S08_CMD_RESET);
> > >  	}  
>