[PATCH v2] iio: adc: ti-ads124s08: Switch to fsleep()

[Fabio Estevam <festevam@gmail.com>]

From: Fabio Estevam <festevam@denx.de>

According to Documentation/timers/delay_sleep_functions.rst,
fsleep() is the preferred delay function to be used in non-atomic
context, so switch to it accordingly.

Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Fabio Estevam <festevam@denx.de>
---
Changes since v1:
- Use andriy.shevchenko@linux.intel.com in the Suggested-by tag.
- Add Reviewed-by.

 drivers/iio/adc/ti-ads124s08.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/iio/adc/ti-ads124s08.c b/drivers/iio/adc/ti-ads124s08.c
index f452f57f11c9..77c299bb4ebc 100644
--- a/drivers/iio/adc/ti-ads124s08.c
+++ b/drivers/iio/adc/ti-ads124s08.c
@@ -184,7 +184,7 @@ static int ads124s_reset(struct iio_dev *indio_dev)
 
 	if (priv->reset_gpio) {
 		gpiod_set_value_cansleep(priv->reset_gpio, 0);
-		udelay(200);
+		fsleep(200);
 		gpiod_set_value_cansleep(priv->reset_gpio, 1);
 	} else {
 		return ads124s_write_cmd(indio_dev, ADS124S08_CMD_RESET);
-- 
2.34.1