[PATCH 00/13] gpiolib: add gpiods_set_array_value_cansleep

[David Lechner <dlechner@baylibre.com>]

This series was inspired by some minor annoyance I have experienced a
few times in recent reviews.

Calling gpiod_set_array_value_cansleep() can be quite verbose due to
having so many parameters. In most cases, we already have a struct
gpio_descs that contains the first 3 parameters so we end up with 3 (or
often even 6) pointer indirections at each call site. Also, people have
a tendency to want to hard-code the first argument instead of using
struct gpio_descs.ndescs, often without checking that ndescs >= the
hard-coded value.

So I'm proposing that we add a gpiods_set_array_value_cansleep()
function that is a wrapper around gpiod_set_array_value_cansleep()
that has struct gpio_descs as the first parameter to make it a bit
easier to read the code and avoid the hard-coding temptation.

I've just done gpiods_set_array_value_cansleep() for now since there
were over 10 callers of this one. There aren't as many callers of
the get and atomic variants, but we can add those too if this seems
like a useful thing to do.

---
David Lechner (13):
      gpiolib: add gpiods_set_array_value_cansleep()
      auxdisplay: seg-led-gpio: use gpiods_set_array_value_cansleep
      bus: ts-nbus: validate ts,data-gpios array size
      bus: ts-nbus: use gpiods_set_array_value_cansleep
      gpio: max3191x: use gpiods_set_array_value_cansleep
      iio: adc: ad7606: use gpiods_set_array_value_cansleep
      iio: amplifiers: hmc425a: use gpiods_set_array_value_cansleep
      iio: resolver: ad2s1210: use gpiods_set_array_value_cansleep
      mmc: pwrseq_simple: use gpiods_set_array_value_cansleep
      mux: gpio: use gpiods_set_array_value_cansleep
      net: mdio: mux-gpio: use gpiods_set_array_value_cansleep
      phy: mapphone-mdm6600: use gpiods_set_array_value_cansleep
      ASoC: adau1701: use gpiods_set_array_value_cansleep

 drivers/auxdisplay/seg-led-gpio.c           |  3 +--
 drivers/bus/ts-nbus.c                       | 10 ++++++----
 drivers/gpio/gpio-max3191x.c                | 18 +++++++-----------
 drivers/iio/adc/ad7606.c                    |  3 +--
 drivers/iio/adc/ad7606_spi.c                |  3 +--
 drivers/iio/amplifiers/hmc425a.c            |  3 +--
 drivers/iio/resolver/ad2s1210.c             |  8 ++------
 drivers/mmc/core/pwrseq_simple.c            |  3 +--
 drivers/mux/gpio.c                          |  4 +---
 drivers/net/mdio/mdio-mux-gpio.c            |  3 +--
 drivers/phy/motorola/phy-mapphone-mdm6600.c |  4 +---
 include/linux/gpio/consumer.h               |  7 +++++++
 sound/soc/codecs/adau1701.c                 |  4 +---
 13 files changed, 31 insertions(+), 42 deletions(-)
---
base-commit: df4b2bbff898227db0c14264ac7edd634e79f755
change-id: 20250131-gpio-set-array-helper-bd4a328370d3

Best regards,
-- 
David Lechner <dlechner@baylibre.com>