Re: [PATCH v13 0/9] Add support for AD485x DAS Family

[Jonathan Cameron <jic23@kernel.org>]

On Fri, 14 Feb 2025 15:19:46 +0200
Antoniu Miclaus <antoniu.miclaus@analog.com> wrote:

> Add support for AD485X fully buffered, 8-channel simultaneous sampling,
> 16/20-bit, 1 MSPS data acquisition system (DAS) with differential, wide
> common-mode range inputs.
> 
> Most of the review comments which make sense in v9 were addressed. Some of them
> might have been ommitted, especially those that are a matter of preference.
> Since we reached v10, I tried to cover everything that was pointed out until now.

Series applied a little speculatively given we don't have a DT tag for the
more trivial dt patch.
Needed some hand tweaking to apply as this raced with the ad7606 changes
in adi-axi-adc.  Please check I didn't mess those up.

Pushed out as testing for now.

Jonathan



> 
> Antoniu Miclaus (9):
>   iio: backend: add API for interface get
>   iio: backend: add support for data size set
>   iio: backend: add API for oversampling
>   iio: adc: adi-axi-adc: add interface type
>   dt-bindings: iio: adc: add ad485x axi variant
>   iio: adc: adi-axi-adc: set data format
>   iio: adc: adi-axi-adc: add oversampling
>   dt-bindings: iio: adc: add ad4851
>   iio: adc: ad4851: add ad485x driver
> 
>  .../bindings/iio/adc/adi,ad4851.yaml          |  153 ++
>  .../bindings/iio/adc/adi,axi-adc.yaml         |    2 +
>  drivers/iio/adc/Kconfig                       |   14 +
>  drivers/iio/adc/Makefile                      |    1 +
>  drivers/iio/adc/ad4851.c                      | 1315 +++++++++++++++++
>  drivers/iio/adc/adi-axi-adc.c                 |  148 +-
>  drivers/iio/industrialio-backend.c            |   60 +
>  include/linux/iio/backend.h                   |   19 +
>  8 files changed, 1703 insertions(+), 9 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad4851.yaml
>  create mode 100644 drivers/iio/adc/ad4851.c
>